• Video Pro X

  25 answers, most recent on 10/24/2024

  RE: Working with GoPro Timelapses
  @CubeAce Hi, there's a few presets like Star trails & Vehicle lights etc. which can be modified & a little photography knowledge would be needed but this is where the 'trial n error' comes in. In the photo & video mode there's plenty of
• Video Pro X

  38 answers, most recent on 9/7/2023

  RE: H264 Export Frame Rate of 16.67 Possible?
  @AAProds Hi Al, I sneaked in a couple minutes between washing dishes and getting back to painting the garage. For sound, as I mentioned, I recorded using the camera/transfer box setup which records audio to the camera, but I plugged in the line-out
• Movie Studio

  29 answers, most recent on 2/12/2024

  RE: Glow/Luminance on white shirts (VHS-MP4)
  @CubeAce I did another cut with BandiCut, cut2 NTW Jazz Concert 1981, and it was HighSpeed (and was high speed the first time, too). It came out of the only original MP4 I have, which came from an unknown generation of VHS. @AAProds I'll look at
• Video Pro X

  38 answers, most recent on 9/7/2023

  RE: H264 Export Frame Rate of 16.67 Possible?
  @AAProds Hi Al. If you can get a hold of an earlier copy of Vegas Movie Studio (Say v16) then it has the ability to render at the frame speed of the original video clips. But to be sure if you have a short clip to test I'm willing to try. Ray.
• Movie Studio

  87 answers, most recent on 4/27/2023

  RE: Video replay speed faster than original loaded video
  @CubeAce @me_again Hi, Ok Ray. I listened to it using WMP and heard the audio right through. WMP gives an error message near the beginning stating that "We can't play the video for P1020363 because its encoding settings aren't supported. You can
• Movie Studio

  46 answers, most recent on 4/10/2025

  RE: Stereo not supported - burning disc
  Hi Brendan Edited: Thanks for the additional information and video clip. . . . . I am using the same disc drive . . . . If I set the disc format in the burn section of to MPEG-2 instead of H.264 which makes the files much bigger, it will burn
• SOUND FORGE

  3 answers, most recent on 4/2/2023

  Sound Forge & SSDs
  A question for some of the more knowledgeable folks here about my hardware: My primary drive (C:) is an SSD, which stores Windows and all of my apps. I noticed the uptick in speed immediately when I switched from an HDD drive years ago. Never going
• Video Pro X

  58 answers, most recent on 1/21/2024

  RE: Poor result on still image travelling
  Hi Marc. The problem with still images is they have no B or P frames. So effectively you are copying all I frames. I tried Al's suggestion and it still looks a bit juddering to me. I think your initial idea of making the pans slower by making the
• SOUND FORGE

  No answers, created on 7/4/2023

  Sound Forge Pro 17 Spectroscope bug?
  The meters for the 32-Band and 64-Band spectroscope presets have the same and release speeds to the 32-Band fast preset; it's all fast. Sound Forge 16 does not exhibit this 'problem'. Can anyone else confirm this?
• Movie Studio

  23 answers, most recent on 4/11/2024

  RE: MEP Premium 2022 - sync with wav file
  @magix_dr Darek, you can use AVIDemux, as per my guide here to trim your file and make a snippet: https://www.aaproductions.net/avidemux.htm Mark out the first roughly 30sec or so. That should be about 150mb. Google Drive is another good file
• Movie Studio

  26 answers, most recent on 1/27/2024

  RE: An Error occured during Export
  @fishycomics Hi . . . . I tried that and its not the best . . . . Are you referring to the 'Motion Tracking', the Using masks to blur out multiple objects or both? 'Motion tracking', ie Attach to picture position in the video in MEP/MMS/VPX, gives
• Video Pro X

  11 answers, most recent on 1/10/2024

  RE: New GPU for Video Pro X 15
  Thanks Ray, Interesting to see that the GPU card can expand on the MB ram, I wasn't aware of that. This confirms that looking for a 16Gb GPU card isn't a bad idea. I also thought that 32 Gb on the MB could be quickly a limiting factor and I
• SOUND FORGE

  2 answers, most recent on 1/4/2024

  RE: How to export mp3 48KHz 192 Kbps with Sound Forge 16
  Hi @Blaine-WItherow.the MP3 encoder was (simplified) in SF v16>17. If one prefers to encode an MP3 in other than the limited dumb-down parameters, the legacy MP3 encoder can be re-enabled by choosing "Activate legacy MP3 plug-in" in the (hidden)
• SOUND FORGE

  3 answers, most recent on 7/23/2023

  RE: I can't click on the dots in Sound Forge 14, it jumps to other places
  SF17 has problems with double clicking. very hard to work on files The double-click issue started with SF-16. You need to double-click really fast to highlight a selection. The PC's global click speed settings have no affect.Hopefully the numerous
• ACID

  267 answers, most recent on 4/2/2026

  RE: Feedback on ACID Bugs
  @SP. Thanks for letting me know, yeah it's really too bad. I was just trying to finish a track that I had started in ACID 11 and it just crashed for no reason using KONTAKT for some horns. Just trying to finish what I have started in ACID but it's
• Movie Studio

  35 answers, most recent on 9/14/2023

  RE: Frame Could Not Be Calculated
  @CubeAce Yep, I don't use these presets, only the Basic fonts & create my own movement or an external title editor. Prob why I'm only just discovering any irregularities just now. 👍 All i can add to his post is that exporting Atomar with Blurred
• Movie Studio

  17 answers, most recent on 9/4/2023

  RE: Export movie in a slower/faster speed or adjust playback speed?
  @john-x Hi, that's a mix of questions, No to Export, If you export with a lower frame rate it will just have fewer frames per second, the movie will still be the same length. Yes to before export, but you would have to change the Speed or use the
• Movie Studio

  13 answers, most recent on 4/28/2023

  RE: stretching or shrinking a video track to match length of another track
  @Peeteey Hi Pete. Are the cameras on remote controls and can both be started at the same time? Are there significant distances between the two ant the subject matter? Did you check on the mediainfo that both cameras used the same video format and
• Video Pro X

  6 answers, most recent on 10/9/2024

  RE: replay video clips in project mode
  @ccolreavy Hi Cliff. Your processor has an Intel UHD630 GPU as well as the GTX 1060. Are both visible and selectable in the Program settings? If they are make sure all of them are set to the Nvidia card and not the UHD630. I think you will find
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Hi I can also confirm no issues with MMS 2024 burning 7.9GB on disc project to disk* with my LG DVD/Bluray at 8x, plays OK in both VLC and on my Sony Bluray player. * Traxdata (Ritek) DVD+R DL 8x speed full face printable about 5 yrs old
• Video Pro X

  58 answers, most recent on 9/12/2024

  RE: [Closed] VPX/MMS update schedule
  @Can-Dive  Hi, a new plugin is added occasionally but new features are very rarely added if ever, in my mind MMS isn't that much different to the old MEP I remember. They change the interface occasionally & move some buttons around to make it
• Movie Studio

  87 answers, most recent on 4/27/2023

  RE: Video replay speed faster than original loaded video
  @Former user Hi . . . . file with PCM audio, . . . does play speeded up at about 2.5x speed, . . . ADPCM audio plays fine, As I see it, this comes back to timing. PCM has a fixed time interval between samples representing the audio signal, ADPCM is
• Movie Studio

  3 answers, most recent on 4/8/2024

  RE: Right to left Languages
  @Romelj Hi and welcome to the user to user forums. You can change the flow direction of text in the text editor if that is what you mean bu have no idea how you would be able type right to left. To enlarge images or videos in this forum simply
• Video Pro X

  6 answers, most recent on 10/6/2023

  Stretching a Looping Video?
  I just purchased the Video Pro X14 software and I am coming from older versions of other magix software where you could just stretch a video and it would loop the video as needed (it didn't seem to matter how far you could stretch it) (you would