• Movie Studio

  47 answers, most recent on 9/28/2024

  RE: chroma key: how to get rid of green or grey fringe around the subject
  @kate-m Hi . . . . And for movement (which i do a lot in my video) i could try to decrease the time exposure? I have maybe misunderstood you, because i'm still learning how to use my camera :-) So from 1/100 to how high? It goes up quite high on my
• Movie Studio

  50 answers, most recent on 1/2/2023

  RE: How to disable pop up advertisements for magix?
  @ AAProds I agree with your take on Magix's adverts. However, I admit I'm possibly more allergic to advertising in general than most people - even though I'm told the human race is doomed without it. I've disabled and/or deleted any file that even
• SOUND FORGE

  No answers, created on 2/23/2021

  [Closed] I have Sound Forge 13, when it was first installed there was no proble
  I have Sound Forge 13, when it was first installed there was no problem, however for the past month as soon as I press record, it races along making reverberation and echo sounds irrespective of what is playing.  I uninstalled, then reinstalled made
• ACID

  24 answers, most recent on 2/18/2021

  RE: [Closed] ACID Pro 10 - Highly unstable & won't render complete mp3's
  Of course we want to improve the ACID stability, but we struggle to get reliable reproductions of any crashes - so I am afraid that it will take longer to fix the issues. Especially, if you have found a way to make ACID crash each time when doing a
• ACID

  24 answers, most recent on 2/18/2021

  RE: [Closed] ACID Pro 10 - Highly unstable & won't render complete mp3's
  Of course we want to improve the ACID stability, but we struggle to get reliable reproductions of any crashes - so I am afraid that it will take longer to fix the issues. Especially, if you have found a way to make ACID crash each time when doing a
• ACID

  24 answers, most recent on 2/18/2021

  RE: [Closed] ACID Pro 10 - Highly unstable & won't render complete mp3's
  If an export crashes, can you try to set the AUDIO DEVICE to "Microsoft SoundMapper" instead of ASIO? If you want to help us to fix this export crash issue, please try if that workaround helps you and report your results here or directly to me. We
• ACID

  24 answers, most recent on 2/18/2021

  RE: [Closed] ACID Pro 10 - Highly unstable & won't render complete mp3's
  If an export crashes, can you try to set the AUDIO DEVICE to "Microsoft SoundMapper" instead of ASIO? If you want to help us to fix this export crash issue, please try if that workaround helps you and report your results here or directly to me. We
• Movie Studio

  10 answers, most recent on 11/26/2020

  RE: dvd image burn fatal using files (avi/mp4/mkv) not recordings
  Does all this below help: the burn log i having difficulty trying to insert this is because it contains many lines and i don't know if the Chinese characters is causing it not to load up but heres a link to it https://gofile.io/d/YuAKgn info - using
• Movie Studio

  20 answers, most recent on 10/26/2020

  RE: Program Doesn't Clear VRAM
  @Mikkel-Reelsbo Hi . . . . What i am still confused about though, is how it works on Premier Pro? . . . . Depending on the version of Premiere Pro, it is using the 'CUDA' - actually the NVCUVENC driver module - for video playback rendering or if
• Rescue Your Videotapes!

  23 answers, most recent on 10/14/2020

  RE: Magix Rescue Your Video Tapes doesn't recognise VCR
  Thank you gentlemen I will certainly try out the above. The driver Johne kindly linked to above resulted in warning nolonger appearing. A windows update made it reappear as I expected from the forum. I have since received an email from Magix help
• Video Pro X

  22 answers, most recent on 8/22/2020

  RE: VPX12 Mercalli V5 Suite upgrade?
  @browj2 Hi John. The best ways to get rid of bounce on an action cam is either to adapt a Ninja Walk or use a Z axis stabiliser. I have two adapted Z axis stabilisers of which were used on the Santa fun run video. Useful as I had to walk backwards a
• SOUND FORGE

  6 answers, most recent on 5/28/2020

  RE: SOUND FORGE Audio Studio 14 issue: FEEDBACK using VST Reverb
  So I did the following test - MONO File 48Khz, 24Bit into a third-part (FabFilter Pro-R) VST STEREO Reverb plugin, Previewed and then Rendered - on another one of my Computers, this one an Intel i7 7820X with 32GB RAM and unfortunately had the
• ACID

  12 answers, most recent on 5/16/2020

  RE: AP10 Not impressed so far
  I first used Sonic Foundry Acid to make radio jingles to very tight deadlines in the 90's. It worked well. I've used just about every professional DAW out there since CB and CW began. Reinvested in this as a notepad for ideas and to make some stings
• Movie Studio

  30 answers, most recent on 11/30/2019

  RE: No hardware encoding with Intel HD 530
  @johnebaker Another interesting image. I only get the one choice in the box. The Intel GPU. See my reply to Peter for an image. If the original video file isn't showing any jerkiness then you could be correct, which is why sometimes I increase the
• Video Pro X

  126 answers, most recent on 8/9/2019

  RE: VPX11 released today - Comments
  I did a short test, rendered a project to DVD. Approx 1:15:00 show, Panasonic .mts files, 4 cameras on the timeline, with transitions and movement, zoom in/out, move R to L, L to R, took about 40 minutes to render. Wish I could get my CPU above
• Movie Studio

  3 answers, most recent on 9/21/2020

  [Closed] Is there a universal stop-watch timer?
  Movie Edit Pro Plus has so many different timers, but I've noticed it has none that you can change the font of nor edit to make it start during a certain point in the timeline. If I want to make a scene where somebody is racing or people are solving
• Movie Studio

  21 answers, most recent on 2/19/2019

  RE: Can people please list their useful third party effects here?
  @CubeAce Hi Ray . . . . Combined with a good 'Ninja' or 'Crab' walk it does work reasonably well . . . I bet you get some funny looks from people not in the know 😂 Haven't yet had the chance to find out yet John 😇 A good tip I forgot to mention -
• Movie Studio

  21 answers, most recent on 2/19/2019

  RE: Can people please list their useful third party effects here?
  @CubeAce Hi Ray . . . . it's a swinging arm that's ball-raced and adjustably tensioned by a coil spring, similar to a car suspension system. . . . . The steady does look a bit 'flexible', is there any drag setting or fluid damping on it? . . . .
• Movie Studio

  21 answers, most recent on 2/19/2019

  RE: Can people please list their useful third party effects here?
  @johnebaker Hi John. If you mean not fixable in post-production, I was sadly beginning to come to the same conclusion, hence trying out various walking methods and adding an x-axis stabilizer, which also needs some adjustment and somewhat fiddly
• ACID

  One answer, on 11/28/2018

  why not an Acid studio 10 x64b ?
  It's a real pity there is no acid studio 64b planned. A few arguments : 1/ using VSTi and Fx in acid studio 32b needs the installation of 32b versions of each plugins, that is a huge waste of space on hard drive when almost all softwares have turned
• Movie Studio

  9 answers, most recent on 8/17/2018

  RE: menu encoding failed - MEP 2018
  @nick_vid . . . . dont want a film menu, just a basic menu page that comes up when you put the DVD in the player so you can select which race you want. . . . You must have a film menu - did you look at the tutorial I pointed you to - it does what
• Movie Studio

  9 answers, most recent on 8/17/2018

  RE: menu encoding failed - MEP 2018
  Hi Nick, Glad to hear that you are still doing the racing vids, I remember well the conversations we had about the possibility of doing it as a business. Claire sends her regards by the way 🙂 Regarding the dvd problem, it could be the windows update
• Movie Studio

  9 answers, most recent on 8/17/2018

  RE: menu encoding failed - MEP 2018
  Hi Roger, yeah Its me from Isle College. Still doing the racing videoing, although its not as good as it was a few years ago with the racing changes and the rise of you tube!   I dont want a film menu, just a basic menu page that comes up when you
• Movie Studio

  9 answers, most recent on 8/17/2018

  RE: menu encoding failed - MEP 2018
  I'll attach a pic of it, its basically a custom one for my car racing DVDs. Ive been using the same template since 2016 and not had this issue before. I have also tried a standard un-edited template as well as a test and it did exactly the same