• Video Pro X

  14 answers, most recent on 3/28/2025

  RE: Disable resample?
  Hi, just to answer some questions here;   My project partner is a lead 2-D animator, and I'm the guy compiling everyone's animations together. He keeps telling me that the footage is blurry and it shouldn't be, and to "disable resampling."
• Movie Studio

  13 answers, most recent on 5/15/2026

  RE: MMS 2025: New AI Effects
  @me_again @AAProds @johnebaker Hi, Have any of you had problems exporting with any of these AI effects as a major part of your video? I'm using VPX17. I have an 8 minute project with AI Sharpen on on much of the footage. Actually, the footage is
• Movie Studio

  47 answers, most recent on 8/24/2025

  RE: "Takes" functionality
  @johnebaker @AAProds @browj2 @Pete-Lowland @Can-Dive Hi. So basically Takes are more useful when sections of video are considered for reuse for multiple projects and where footage may be brought in from more than one drive. So my workflow is more
• Video Pro X

  5 answers, most recent on 5/22/2025

  RE: [Solved] Upgrading from Movie Edit Pro to Video Pro X (16)
  @Operaman Hi, First off, did you download and install all of the additional content that comes with the program? It is about the same as what you had with MEP if you downloaded and installed everything, except that with VPX, you get the commercial
• Video Pro X

  4 answers, most recent on 4/19/2026

  Video Pro X16 zoom missing
  I just bought Magix Video Pro X16. Previously I used Video Edit Pro 2021. In Pro X16, under View/Animation > Size, there is no zoom at all. This makes it harder to create moving zoom effects in the new program. Now I have to do the zoom effects
• Movie Studio

  14 answers, most recent on 10/29/2024

  RE: MEP 2023 | 2 video files (in 1-day) have been exported with corruption
  Hello, and thanks for the reply.The footage itself was filmed at around only 8k bitrate though...So whilst I could set the export rate to 24k, the actual raw footage would still only be 8k bitrate. :/Would setting 24k bitrate fix this issue then
• Movie Studio

  10 answers, most recent on 11/16/2024

  RE: Edit pro 17 rotation/mirror effect
  @AAProds Hi, I agree with @AAProds in that some files need converting first before importing into the editor, this isn't unusual esp with phone footage but as mentioned there's other things to take into consideration, iPhones are auto set to record
• Rescue Your Videotapes!

  7 answers, most recent on 12/19/2025

  RE: Lines in digitized VHS
  @MovieEditorr Did you deinterlace the recorded footage? Analog video images are saved in lines and only contain half of the full video frame. Each frame switches back and forth between even- and odd numbered lines. So, if you didn't deinterlace the
• Movie Studio

  47 answers, most recent on 8/24/2025

  RE: "Takes" functionality
  @Bol Rob, recoding of, especially, old SD footage simply for easier access is not desirable. And unless you delete the source file, your video storage requirements will increase dramatically if you do make snippets of your source file/s. Secondly,
• Movie Studio

  14 answers, most recent on 10/29/2024

  MEP 2023 | 2 video files (in 1-day) have been exported with corruption
  I installed MEP 2023 a few days ago.Yesterday I edited then exported a few video files via the program...But 2 of them have image-corruption within the exported files.*1 was blurred/corrupted almost the entire footage-length / The other had 2
• Video Pro X

  33 answers, most recent on 9/25/2024

  RE: Under Effects, using "Auto-exposure" doesn't tell you what it has done
  @simmiv I've also noticed if you have a video footage which has to be split and then apply auto exposure to one part of it, it may work well, but when applying to another part of the same video footage it is different. Of course one can apply the
• Movie Studio

  32 answers, most recent on 7/29/2024

  RE: Deinterlacing-How does Magix do it?
  @johnebaker Hi John. That was my conclusion earlier when I saw results of trying for myself with progressive footage. It's very evident if videoing fast action and then using the scroll wheel on the rendered video once re-imported. As for using
• Video Pro X

  22 answers, most recent on 5/30/2025

  RE: newblue display is faulty in timeline monitor
  @Betovalle Hi. It's possible you are just suffering from the moire effect due to differences between footage resolution, your screen's resolution and the size of the image on screen, although your example does seem extreme. Ray.
• Movie Studio

  46 answers, most recent on 4/10/2025

  RE: Stereo not supported - burning disc
  Thank you for the tip. Yes I do burn quite a lot, mostly home videos but there is a good deal of higher quality footage I dabble in, hence buying a new computer that is upto day and much large power needs. In hindsight if I had known this I would
• Movie Studio

  70 answers, most recent on 9/19/2025

  RE: Reasonably affordable graphics card for Magix Movie Edit Pro Plus
  @CubeAce surprisingly, with AMD CPU's outselling Intel, you would think that Magix would be at least testing them. Intel iGPU's are mature, while the AMD iGPU's are in their infancy so to speak. @Tusk as for "remnant" possible GPU drivers left over,
• Movie Studio

  2 answers, most recent on 6/28/2024

  Twin-lens camera stereoscopic 3D editing - unlike side by side?
  I'm coming from a lack of knowledge and in a quandary. I usually use DaVinci Resolve and stereoscopic 3D editing (not rendered in side by side) is new territory. To explain, I received twin-lens footage from a Panasonic z10000. The friend of a
• Movie Studio

  6 answers, most recent on 7/3/2025

  RE: Video Deluxe 2026 initial testing bugs (?)
  @Betovalle I wrote this in the German forum. Working with 10-bit 4:2:0 material on the timeline has never been as stable and largely smooth for me with any Magix version as with this version. (Even better than Magix Vegas 22.) My hardware resources
• Movie Studio

  46 answers, most recent on 4/10/2025

  RE: Stereo not supported - burning disc
  @johnebaker Which edition of MMS 2023 are you using ....MMS 2023 Suite, version 22.0.3.172 (UDP3)are the audio streams on disc encoded as AC3 Surround Sound or AC3 Stereo?according to MediaInfo AC-3, 192kb/s, 48.kHz, 2 channels, AC-3 (Dolby
• Movie Studio

  3 answers, most recent on 5/28/2025

  RE: [Solved] Does Movie Studio 2025 Platinum support HEVC?
  @mlp-mlp Hi. upgrading from Sony Movie Studio 12 to Magix 2025 Platinum Magix Movie Studio is not an upgrade from Sony Movie Studio 12, Magix Movie Studio is a different program but it is a good basic editor, as you say you're looking for 'simple
• Movie Studio

  22 answers, most recent on 4/9/2026

  MS re-names every new import to the name of the last saved project!
  2 days ago I saved a project via Magix, to re-open & finish editing later.I finished this project yesterday | So exported the finished video | And then also deleted the "project" file off my computer.However when I import new video footage today
• Movie Studio

  32 answers, most recent on 4/2/2026

  RE: Export quality from RTX Ti3060 far inferior to UHD770
  The saga continues... Definitely something odd with the 3060 exports (2720x1530 and 3840x2160 at various bitrates and also tried the UHD 5994 preset) on my TV (LG "4K"/UHD smart). I've made up a 1min 42 sec video of some drone footage with a
• Movie Studio

  11 answers, most recent on 10/27/2025

  RE: balance sound level to be equal from two cameras/sources on final edit
  @spuddy13, @browj2, @emmrecs Hi Brian, John en Jeff, I rarely use the Multicam function myself, as I only work with one camera. Sometimes I also incorporate footage I receive from someone else into my films. The sound recordings can then differ
• Movie Studio

  32 answers, most recent on 4/2/2026

  RE: Export quality from RTX Ti3060 far inferior to UHD770
  @AAProds Hi Al . . . . I've made up a 1min 42 sec video of some drone footage with a soundtrack and the video definitely runs slower than the audio . . . . Is the sound track that of the drone or a music / other audio track? . . . . The timecode
• Video Pro X

  6 answers, most recent on 8/7/2025

  RE: Problem download video using FIREWIRE
  @zdenekrsa I regularly use Firewire to download video from a range of digital video cameras but I have never seen either of those error messages. I assume you are trying to use the DV to MPEG icon option on the Capture screen. Is that correct? If