• Movie Studio

  90 answers, most recent on 1/13/2025

  RE: Slideshow-Reducing photo length merges Audio track
  @AAProds @browj2 Thank you both for clarifying what "Range" meant in this situation. Interestingly, having the photos on Track 2, the change in photo length works as one would expect; no impact to other tracks. Although not visually indicated, I now
• Music Maker

  4 answers, most recent on 1/26/2025

  RE: Exporting a song freezes MM
  @Guy-VV Hi From the image posted what is the FX applied, see image below, on the indiccate track. The crash at this point, where the first object is on this track, looks like a good candidate for cause of the issue. Check all used tracks to see if
• Audio Cleaning Lab

  32 answers, most recent on 11/21/2024

  RE: importing a stereo mp3 file into both tracks seprately
  @Gerald-Shantz Hi, Further to the above, and what may be a bit confusing to you, is that SFACL has multi-track capability. Each track can be mono or stereo. Each track can be a completely separate file. SFACL can have up to 8 tracks. For your file,
• Music Maker

  27 answers, most recent on 1/7/2025

  RE: How to turn off loop preview?
  I cannot fathom what the developers were thinking, not allowing to pick up 'Loop Preview' with your mouse and move it to a better or the correct location when 'Loop Preview' turns up where it obviously shouldn't be, well aware of by the developers,
• Music Maker

  7 answers, most recent on 10/3/2024

  RE: Object FX on VST instrument loops
  @Wirralguy Welcome to the Magix user forums! Sorry no-one has answered you before. FX are added to a track, not to an individual object. To do what you want I think you would have to place each use of each loop on a different track and apply the FX
• Movie Studio

  3 answers, most recent on 8/28/2024

  RE: Best Quality Export
  @RichardDP Hi Richard. I am less concerned about reusing a rendered clip for quality than you finding the program so 'buggy'. I have had MMS 2024 for some time now and rarely had any problems that you have described and on the whole been quite
• Music Maker

  3 answers, most recent on 1/24/2025

  RE: Cannot record microphone or hear keyboard
  @Tony-Miller Please check the following things: If you have a new computer, make sure that audio recording is enabled in the Windows security settings, otherwise it gets blocked:
• Movie Studio

  34 answers, most recent on 11/26/2025

  RE: MP4 audio going out of sync
  @johnebaker @ron-griswold Hi. Personally I don't think having the Sonic Studio program installed with the Asus RealTek audio drivers is a problem. Everything in the Sonic Studio can be turned off and I have never had less functionality out of the
• Video Pro X

  8 answers, most recent on 3/9/2025

  RE: keyboard shortcut photo and transition
  @Betovalle Hi Roberto, +1 to be able to add a shortcut to get the Change photo length interface screen. I suggest that you ask Magix to add this capability - we all should ask. You can also use the Object Trimmer (shortcut Shft+N) to change the
• Movie Studio

  11 answers, most recent on 4/11/2025

  RE: Extending or shortening the entire project
  @Andrzej-Marcinkiewicz Hi, I threw in the part about Movies in case that you are not aware of it. You can have multiple timelines in MMS in one project, each with different settings, if desired. I almost always have more than 1 Movie in a Project
• Movie Studio

  9 answers, most recent on 2/23/2024

  RE: Key frames in audio
  @Greg123 Hi, See my last post. I suggest that you watch my tutorials on Everything Audio - both parts - in which I cover volume curves. Movie Studio has extensive audio features. What Ray has shown you are 2 of them. Vegas Movie Studio only
• Movie Studio

  11 answers, most recent on 11/4/2024

  RE: movie studio 2025 suite - sound missing on clips
  @spuddy13 Hi Brian, A few things: i also usually have video and audio on same track so its ticked unless i am adding music from another source and want to separate the audio and video on source I strongly suggest that you turn on video and audio on
• Music Maker

  27 answers, most recent on 1/7/2025

  RE: How to turn off loop preview?
  Yes, that is basically the problem. Thank you for taking the time. Now, do the same video, only with 100 tracks, all with loops, like my current project :) I think people would even say I've been relatively calm about it. Because it is a true
• Movie Studio

  31 answers, most recent on 7/9/2024

  RE: How do I redo an audio track in Movie Studio 2024 Platinum?
  @Eric-Elliott Hi, 1. Just leave it at 32 tracks - and never 4 tracks, 16 minimum. They are there if you need them. Normally you will probably only use 5 or 6 tracks and the others are off-screen anyways. 2. Not sure what you mean. 3. Once you have
• Music Maker

  37 answers, most recent on 11/11/2023

  RE: need major help with recording on music maker 2024
  im just trying to record sound from track 4. so i turn on midi rec on empty track 3 n try to record. sound is playing from track 4 but recorder is not recording :/ just creates an empty clip
• Samplitude

  5 answers, most recent on 4/1/2025

  RE: problem with volume control for virtual instruments
  No luck - the event list is only showing Note On events, nothing else. I also thought to check and see if there might be an unwanted volume animation curve for some reason, and there was not, so I know that's not the problem either. To be clear (in
• Movie Studio

  90 answers, most recent on 1/13/2025

  RE: Slideshow-Reducing photo length merges Audio track
  @johnebaker Hi John EB, Thanks for confirming about the audio problem in Storyboard mode. @Can-Dive Hi, Thanks also for confirming the audio problem in Storyboard mode. The Demo is so old that most of us weren't born yet. Ok, that's an exaggeration,
• ACID

  12 answers, most recent on 9/12/2023

  RE: [Solved] Magix Independence (latest version)
  OK, I figured it out. I downloaded Samplitude Pro and registered it with a 30 day trial license. It turns out I needed to use a MIDI track and not a stereo track. I was able to get Independence Pro working in Samplitude. Then I went back to ACID
• Music Maker

  27 answers, most recent on 1/7/2025

  RE: How to turn off loop preview?
  Hmm, you sound like AI. In any case, you have obviously never tried Music Maker yourself… 'Loop preview' can only be one thing. You should know what it is. I am sending a screenshot of 'Loop preview'. I want to use Music Maker without having 'Loop
• Movie Studio

  13 answers, most recent on 12/30/2024

  RE: Movie Sutdio 2025 Suite - Display Color vs Video Area
  Greetings, I use this feature quite often; I find it especially useful with slideshows. I'm not sure if I've read all this post and answers correctly but ... . . . . . An option to be able to switch such a thing on or off would be good . . . . . I
• Movie Studio

  18 answers, most recent on 9/2/2024

  RE: How to have Multiple Effects Masks on one 'Effect'.
  @robertkjr Hi. Simply right click on the mask object on the timeline and select copy and then paste that object onto the timeline on a new track. (preferably the next rack down and right clicking the mouse again to bring up the paste command.) Make
• Movie Studio

  90 answers, most recent on 1/13/2025

  RE: Slideshow-Reducing photo length merges Audio track
  @johnebaker Thanks for taking the time to test the import of MVP files into Photostory. Although not specifically related to this post, as a new user, it has helped me gain a better understanding of the three Magix photo/video editing
• Video Pro X

  175 answers, most recent on 5/27/2026

  RE: Video Pro X16 - New Features and Bug Repairs
  @Hansy supporting my suggestion is based on many years of experience with this application. Why then have you persisted with it if you don't like the track layout? Magix does have some handy features, but the track layout and operation is the killer
• Music Maker

  7 answers, most recent on 10/3/2024

  RE: Object FX on VST instrument loops
  @Wirralguy Hi, So would the follow on process for this be to cut down the mixdown track into loop sized objects, string them together and perform object effects where required? Without seeing what you are doing, I would say so. Then, if you want to