• Movie Studio

  6 answers, most recent on 3/31/2023

  RE: way to rollback "updates"? software now just randomly "hangs" renderin
  @Not-Applicable Hi . . . . "hang" on the rendering of an alpha blend between 3 short image clips . . . . Can clarify what you mean by 'Alpha blend' - do you mean a standard Crossfade, or did actually use Chromakey Alpha to transition from one image
• Movie Studio

  45 answers, most recent on 2/2/2023

  RE: Timeline colour and selection
  @AAProds, @browj2 Hi . . . . John, "something's cock-eyed somewhere"  . . . . At some time in the recent past the fade in/out behaviour has been changed, in MEP 2016 when you add a fade in/out the audio is also faded in/out. . . . . All the
• Video Pro X

  31 answers, most recent on 1/19/2024

  RE: Video Pro X12 - Newblue Elements not working/registered?
  @Clifford-Bowman Hi Cliff. I did say to turn anything within the NB effect that has Bur attached to the slider control to off. That cleared up that problem more for me although not perfect. I think adding the frame doesn't help either. The effect
• Movie Studio

  4 answers, most recent on 1/1/2024

  RE: Exporting
  @nmartens Hi . . . . take my existing homemade DVDs and convert them to files . . . . Movie Studio can do this however there are some points to note: The resolution of the DVD video files is 720 x 576 (PAL) or 720 x 480 (NTSC) - if you are
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @Reyfox Hi, Boris transitions can be saved as a preset from within Video Event FX. Easy to do. See screenshot below. The same can be done with any transition, saving it as a Preset. Boris Transitions are amazing. This is the thread in Vegas.
• Movie Studio

  45 answers, most recent on 2/2/2023

  RE: Timeline colour and selection
  Thanks for your helpful and speedy response, it is particularly useful to know what is not possible to save much wasted time. Thanks for the tutorials - I have already viewed some of your tutorials and they were useful One further question -
• Video Pro X

  46 answers, most recent on 1/16/2024

  RE: VPX15, no hardware encoding during BD burning
  @Willem-vdfdeJong Hi I am assuming you are still creating the same type of project as was discussed in the Chapter menu issue, ie basically joining camera video together with minimal effects etc. . . . . if you already have successfully encoded a
• Movie Studio

  84 answers, most recent on 8/5/2024

  RE: Linking "videos" or "projects" question
  I was thinking steps #1 and #2 then #4 and #5. I don't have any "movies" though, they are "projects" or at least that is how the program saved them. Again, I do not know what a "movie" is. I used to know, but that was back in the 60s and before MS.
• Movie Studio

  90 answers, most recent on 1/13/2025

  RE: Slideshow-Reducing photo length merges Audio track
  @browj2 Thanks for taking the time to put together the Storyboard video. It has the makings of an excellent tutorial for your YouTube channel. I particularly like the use of the numbered, colour objects to clearly demonstrate the software. For
• Photostory

  2 answers, most recent on 12/14/2022

  newbie
  Hi, I'm a newbie to magix photostory and am trying to find out how to set transition & photo times, also how to add random transition effects. Thanks in advance lostinthe 60s
• SOUND FORGE

  12 answers, most recent on 3/27/2024

  RE: [Solved] SoundForge 17.0.2 crackling
  What do you mean by "do not start at the zero crossing" When editing, it is recommended to have "Options> Snapping> Zero Crossings" enabled to prevent extraneous pops, clicks, glitches for occurring at the edit points. On your kick drum
• Video Pro X

  5 answers, most recent on 1/15/2023

  RE: Recently Used Transitions
  @simmiv Hi The recently used list does contain transitions that have been used from project to project with VPX 14 v 20.0.3.176 shut down in between. In the image below, the indicated transitions have not been used in the latest project, which had
• Video Pro X

  2 answers, most recent on 3/22/2023

  RE: [Closed] GL Transitions always crash program
  @Bill-Maries Hi, I just checked and transitions are working fine in Video Pro X14 on both of my computers. For Vegas, you're in the wrong forum. Go under Help in the program and click on Vegas Community, or scroll to the very bottom of this forum
• Video Pro X

  175 answers, most recent on 5/27/2026

  RE: Video Pro X16 - New Features and Bug Repairs
  I agree with @johnebaker and others in making it an option to change the track layout. That way, both "camps" are happy and it will possibly attract others to the software. It can be a unique selling point for the software for those that are looking
• Video Pro X

  2 answers, most recent on 3/22/2023

  [Closed] GL Transitions always crash program
  Latest Vegas Edit (updated today, but was also doing it before todays update), RTX4080 12GB, 24 Core 13th Gen Intel, 64gb Ram, Windows 11 laptop I can't even open the transition window to GL Transitions now, and I have a project with a few of them
• Movie Studio

  35 answers, most recent on 9/14/2023

  RE: Frame Could Not Be Calculated
  @sunago Hi James. Thanks for the additional information. Your system specs should be in your posts SIGNATURE section so as people who may not have seen or remember your earlier posts know where to look for it. That would help. One thing I noticed
• Movie Studio

  24 answers, most recent on 12/21/2023

  RE: Problem with Update 23.0.1.191 (UDP3).
  @Former user, @browj2, @emmrecs Hi . . . I updated yesterday, . . . To which version, I have just had a second patch update a short while ago to .192 with these fixes: - Crashfix for empty arrangement when clicking in preview monitor - Crashfix
• Video Pro X

  111 answers, most recent on 1/29/2025

  RE: Feedback about VIDEO PRO X15
  @ReyfoxHi Tony, Aha - we now know your name. Yeah... I've had that name from birth... but it was so long ago.... Magix has positioned Vegas as the Pro editor, followed by VPX, then MMS. However, there are differences in editing abilities that are
• Movie Studio

  5 answers, most recent on 1/22/2023

  RE: How do I remove a transition in Magix Movie Studio Plat 2023
  Thanks AAProds and browj2 yep through what you wrote AAProds and browj2's video i figured it out. How many transitions should i have, does not seem like there are as many as I had in Vegas Plat 16
• Video Pro X

  5 answers, most recent on 2/28/2023

  RE: Update patch released for VPX 14 (VPX 20.0.3.180 (UDP3)
  @Marc-Goder Sorry. In that case I would never have noticed. I tend to make my own transitions or use one of the many already in the base program. My interest in Vitascene was to look for things like the alternative looks it could give to a complete
• Movie Studio

  296 answers, most recent on 3/29/2025

  RE: [Closed] Feedback on Movie Studio 2023
  @Bill-the-repair-guy HI To add to @AAProds comment, if you have not done so, download and install all the Extra Content, otherwise you will be missing more then just the transitions. John EBForum Moderator
• Movie Studio

  4 answers, most recent on 9/23/2023

  RE: Creating a new Film template theme
  @LoganTMT Hi An Intro template is something you can create your own from your own, or stock, video clips, images, titles adding effects to 'customise' the look,eg: Animation/movement of titles or use one of the title presets Colour saturation or
• Movie Studio

  3 answers, most recent on 1/28/2023

  RE: Compatibility
  @Christopher-Robertson Yes to cube files. Just place them in the appropriate folder. 3rd party transitions and effects from the Magix shop should place themselves in the program when downloaded. LUTs may need to be placed into the appropriate
• Movie Studio

  57 answers, most recent on 8/31/2023

  RE: New Release MMS 2024....
  @Reyfox Hi, I just upgraded to the suite version, haven't had much time to play with it but nothing new except the UI, you can select events on the preview window but I'm not impressed with that, Did 2023 have Mask Generator in Video