• Other products

  5 answers, most recent on 3/19/2022

  RE: Movie Studio 18 Recording PC Screen and Audio
  @Martin69 Hi Martin and welcome to the user to user forums. Windows must allow apps to use the microphone. Make sure this is turned on. The the Windows sound settings make sure Stereo Mix (or your systems equivalent) is selected as the input
• ACID

  14 answers, most recent on 3/17/2022

  RE: Acid Pro 10 takes ten minutes to load
  Well, I believe I solved the issue. Unless you hear me whining again tomorrow. Thanks to everyone. This message (attached) popped up a couple times - guess I didn't take it seriously. I typed it (get the spaces right) into the Firewall exception box
• SOUND FORGE

  One answer, on 3/16/2022

  RE: Windows Classic Wave Driver
  @Rudy-Monroe Right Click on the speaker icon in the Windows Taskbar in the lower right corner then click on Sounds. The Windows Sound configuration window will open. Go to the Recording tab and look if your Stereo Mix device is listed there and if
• SOUND FORGE

  7 answers, most recent on 3/12/2022

  RE: can't get cassette player to record stereo-it only records one channel
  @Brian-Talley Hi Assuming you are running Windows 10 check that the Windows settings, Privacy, Microphone, Allow desktop apps to access the microphone is turned on. For best quality transfer of tapes to the computer if the Marantz is detected
• SOUND FORGE

  8 answers, most recent on 3/12/2022

  RE: Why am I suddenly glitching?
  @Eva-Wilhelm Hi . . . .  I've uploaded an mp3 and a picture of the wave form . . . . Where to? You have not posted any links to the mp3 file, the image you can post in a comment here - use the blue icon with an upward pointing white arrow to upload
• Video Easy

  9 answers, most recent on 3/13/2022

  RE: I can not import videos from my VCR. What should I do?
  @Sara-Salehi Hi and welcome to the forum. This is probably a driver issue - assuming you have a Magix USB video capture device, download and install the correct driver for the USB capture device from here. Select the correct driver based on the
• SOUND FORGE

  3 answers, most recent on 6/5/2023

  adjust recording levels in Audio Studio 16?
  I am recording with a microphone in Sound Forge Audio Studio 16. The channel meters are displayed. But the channel meters do not show anything until the recording is finished and I play it back. I would like to use the channel meters to adjust my
• Rescue Your Videotapes!

  One answer, on 2/21/2022

  RE: I have MAGIX VIDEO SAVER 8th Edition
  @Eero-Kuparinen Hi and welcome to the forum. Assuming you mean that when you try to capture a video using the USB capture device check the Windows Settings, Privacy, Microphone options are set to allow desktop apps to access the microphone. If this
• SOUND FORGE

  10 answers, most recent on 2/19/2022

  RE: How do I turn the limiter off when recording?
  It certainly appears there is some kind of limiting happening. I would look at your soundcard/interface settings. Is the audio distorted some? Many folks make the mistake of feeding a line level signal (-10 or +4 dBm) into a microphone level input
• Movie Studio

  13 answers, most recent on 2/11/2022

  RE: Crashes for burning 23.976, Audio support, options not saved...
  @Former user Hi Gid. That is as good an explanation as you will probably get on that link Gid. If you consider that a 3dB increase is a doubling in volume (assuming power increase is a linear proportion to speaker cone movement) but a 10dB increase
• Movie Studio

  13 answers, most recent on 2/11/2022

  RE: Crashes for burning 23.976, Audio support, options not saved...
  @Former user Hi Gid. A Sony Wave or wav file may have a Digital Rights Management code embedded into it before a copy of the file can be edited. It may play normally but MEP will pick upon any DRM coding within a file and will not play any form of
• ACID

  10 answers, most recent on 2/4/2022

  RE: Tracking with FX in ACID Pro
  @Brackets Have you checked if you are monitoring the output signal from your computer and not the input signal from your microphone before it goes into the computer? I don't know how the 18i20 works, but I would guess you can configure it.
• Music Maker

  One answer, on 1/22/2022

  RE: cant seem to get my microphone to work
  @real-incorrigible USB microphone? You need to select the Magix Low Latency ASIO driver in the Music Maker program settings and then click on "Advanced..." to open the driver settings where you need to activate your microphone as an input.
• Music Maker

  One answer, on 1/22/2022

  cant seem to get my microphone to work
  hello. so i am very new to this program. i managed to get the audio to playback into my headset, but i cant for the life of me figure out how to assign my microphone to record. i am trying to make a rap album and cant really move ahead with anything
• Movie Studio

  16 answers, most recent on 1/21/2022

  RE: Audio interface
  @CubeAce Hi Ray, If it is possible to record an external source such as a microphone while playing back and viewing the project video within VPX or MEP, this is a function I have not found yet. I see that you still have not watched my tutorials on
• Movie Studio

  16 answers, most recent on 1/21/2022

  RE: Audio interface
  @browj2 Hi John. I think both @Former user and myself are aware what ASIO is and does. As for the latency between playback and the audio slider in the mixer, does the lack of ASIO have anything to do with this? Is it just that you don't hear the
• Other products

  One answer, on 1/18/2022

  RE: SOUND FORGE PRO 12
  @Valdemar-Paraguassu Hello! Please check if you allowed "microphone access" for Sound Forge in the Windows Settings. This is necessary if want to record
• Music Maker

  One answer, on 1/16/2022

  RE: I need help with connecting my Microphone! ZOOM CALL ME TO TEACH ME!
  @Elijah-Luke Install the Focusrite USB driver. Go into the Music Maker program settings by clicking on the gear icon in the top left corner and switch to the Audio/MIDI tab. Select ASIO as the driver system and your Focusrite USB driver and click on
• Music Maker

  One answer, on 1/16/2022

  I need help with connecting my Microphone! ZOOM CALL ME TO TEACH ME!
  OK So the interface I use is Focusrite and I need someone to zoom call me to help me set up my connection! it should be very easy to just help me please! I don't want to feel like I wasted money on this! help me just connect my microphone to it
• Music Maker

  7 answers, most recent on 1/16/2022

  RE: MIDI Device not recognized
  I do wonder how this would work using a microphone for vocals or guitar however. Obviously a guitar or microphone do not have that particular MIDI cable connection. Your still confusing audio and midi. Midi is not audio. You can't record midi and
• Music Maker

  7 answers, most recent on 1/16/2022

  RE: MIDI Device not recognized
  @jonas-geusebroek Yes, just connect your microphone and guitar to the Focusrite input to record the audio signal. If you want create MIDI with a guitar or microphone there are special converters that convert sound to MIDI or software like Jam Origin
• Music Maker

  7 answers, most recent on 1/16/2022

  RE: MIDI Device not recognized
  Thanks for all the input. I see that I perhaps need to obtain a Midi specific cable/interface to plug into the back of the keyboard and my laptop. My focusrite indeed does not have a USB input, so that seems useless. Would I be right in saying that
• Movie Studio

  7 answers, most recent on 1/11/2022

  RE: The device does not support the recording format
  @reggie-wright Hi When posting a screenshot of a dialog box please include the whole dialog - as shown in the image below - this is from Movie Edit Pro 2022 which Movie Studio 2022 is (the 2 products are to be merged in to one). In the Windows
• Music Maker

  5 answers, most recent on 1/5/2022

  RE: audio recording with microphone
  @ole1 It should probably work fine with the Magix Low Latency driver. You need to click on the "Advanced..." button after selecting the driver and activate your Microphone as an input in the advanced driver settings.