• Movie Studio

  17 answers, most recent on 12/24/2021

  [Solved] MEP 2016 Plus Captured AVI Files - Codecs
  Hey Guys and Gals Christmas is getting closer .... This should probably be posted elsewhere (my apologies). Continuing to capture DV using MEP 2016 Plus, I checked/compared older captured video using FCP. Natively captured video using FCP (as I
• ACID

  2 answers, most recent on 12/17/2021

  RE: [Solved] Sections ghosted and unable to be moved in Acid Pro 8
  is it a frozen midi track? These are 'locked in' midi tracks that are rendered out to wav when frozen. You still see them as midi tracks, but you can't edit them again until you unfreeze the track.
• ACID

  2 answers, most recent on 12/17/2021

  [Solved] Sections ghosted and unable to be moved in Acid Pro 8
  I have just finished a project and rendered the final result but I have noticed an audible 'click' at a tempo change point from 150 bpm to 90 bpm. I have not found a way of removing this so wanted to try separating the slower sections I had inserted
• SOUND FORGE

  3 answers, most recent on 12/15/2021

  RE: [Solved] Sound Forge 15.0 Pro Bld. 159 "Save As" issue
  Disable (uncheck) "Automatically reopen file after Save as" in the "Options> Preferences> General" menu. You may also want to disable "Prompt to open new file after Save as" as well. When you encode (Save as) your Flac, MP3 or other format
• Movie Studio

  17 answers, most recent on 12/15/2021

  [Solved] GoPro Footage popping between clips (or on clip transition)
  When editing GoPro footage, every single transition from clip to clip (regardless where I end the previous or start the proceeding clip) there is loud popping (or series of loud popping). It makes the film completely unusable. To get around this in
• Movie Studio

  24 answers, most recent on 12/25/2021

  [Solved] All audio stripped MAGIX Movie Edit Pro Plus 2021
  I have been working on a project for months with no problems. Yesterday I rendered a rough movie version for review. It turned out fine, but today when I reopened the project to add some clips, I got an error message for every mp4 file associated
• Music Maker

  7 answers, most recent on 2/3/2022

  [Solved] Beatbox not rendering
  Hi, I've just started using Beatbox (the free version, not pro). As far as I understand, to create a sample from it I need to grab the waveform block and drag it into the main editor. However, when I pick up that block, it turns into a "loading"
• ACID

  4 answers, most recent on 11/10/2021

  RE: [Solved] Bus tracks not rendering
  @Mark-Martucci Hello, Welcome Did you try real time rendering? Stephen Forum Moderator
• Movie Studio

  3 answers, most recent on 11/6/2021

  RE: [Solved] Error in module "Videodeluxe.exe"... "ACCESS_VIOLATION"
  Thank you. I actually copied everything from one tab (movie) to a fresh tab (movie) & then deleted the old tab. Then when I rendered the video on the new tab everything worked normally without crashing. Thanks
• Movie Studio

  3 answers, most recent on 11/6/2021

  [Solved] Error in module "Videodeluxe.exe"... "ACCESS_VIOLATION"
  I am getting this error every time I try to render. I have uninstalled and reinstalled and still get the same error. Does anyone know what to do to fix this? Is there a patch or something? I have the latest version of Movie Edit Pro Premium 2022
• ACID

  4 answers, most recent on 11/10/2021

  [Solved] Bus tracks not rendering
  I set up a few busses, one for guitar effects, and one for drum effects. They play fine in the acid program, but when I render the file the tracks that are contained in the bus tracks are missing from the song. Is there a setting to export the file
• Samplitude

  4 answers, most recent on 10/20/2021

  RE: [Solved] Which time stretcher should I use?
  @beth-hall The online effect is computed while playing back which needs more computing power (for playback + effects). Offline effects are computed before playback so you need less computing power for just the playback. If your systems struggles
• SOUND FORGE

  3 answers, most recent on 10/19/2021

  RE: [Solved] Saving edits in Sound Forge Pro.
  File> Save as, 'Sound Forge Pro project file (*.frg). This creates the <.frg> project file and a new (frg) media folder. When you wish to create a new edited /processed audio file, select File> Render as.Unfortunately, opening an
• SOUND FORGE

  3 answers, most recent on 10/19/2021

  [Solved] Saving edits in Sound Forge Pro.
  I hope I am doing this wrong, but when I make changes in SFP during a session and then hit 'save', the program appears to render/export the file. In other programs, like Audition, Audacity, Reaper, Mixbus/Ardour et al, I can make changes to the work
• Photostory

  One answer, on 9/18/2021

  [Solved] H.264 fails
  Is the H.264 free in photostory 2022. I can not get any thing to burn using it burning bluray, comes up with error when rendering the menu, menu encoding failed. I tried about all the menus also fails with the same thing on AVCHD. Using the MEEG-2
• Other products

  8 answers, most recent on 8/8/2021

  RE: [Solved] Rendering in 4k
  @Kyle-day Hi Kyle. It is possible your machine may not be able to render 4K files with Hardware acceleration switched on if your system spec does not support 4K editing with your hardware but may export if you switch off 'Use Hardware acceleration
• Other products

  8 answers, most recent on 8/8/2021

  [Solved] Rendering in 4k
  So I've just purchase movie studio 18 suite, I've started my first project with some GoPro footage all in 4k 30fps, finished editing it and the preview everything looks good. When I got to file drop down menu and try to export in mpeg-4 at 4k the
• ACID

  One answer, on 7/28/2021

  RE: [Solved] Acid 8.0 Rendering tracks 24bit 44,1Khz mono
  hi @ThomasWarhuus-Adland I don't have AP8 installed any more, but I don't remember the render options changing in the past few versions, so this should be the same in AP8. In Acid, go to render, select the format (e.g. wav or flac), click custom,
• ACID

  One answer, on 7/28/2021

  [Solved] Acid 8.0 Rendering tracks 24bit 44,1Khz mono
  Hi! Is there an option for 24 bit 44.1Khz mono when rendering files? I only get to render in stereo when I use 24/44,1 I use Acid 8.0 version 8.0.12 (build 26) 64-bit, Windows 7 pro 64-bit. Your help is much appreciated! Thank you. Thomas
• Other products

  3 answers, most recent on 7/23/2021

  [Solved] Movie Studio 18 Suite - Green Flicker in video playback and render
  Recently upgraded to Movie Studio 18 while retaining the version 17 for comparison and discovered a problem with the playback.I'm getting garish bright green flickers on the playback that are not present in the source MP4 when watched and the same
• Other products

  One answer, on 7/13/2021

  [Solved] Vegas Pro 17 build 455 - NVENC - Can't read stream
  Hi. We are having major issues with this NVENC anomaly. I have read all over the internet about making a change to the template so it can run. The thing is, we activate our templates from a script using the Vegas scripting interface. We need to be
• ACID

  7 answers, most recent on 7/8/2021

  [Solved] Rendering with ASIO or MME drivers
  Hi My rendered files have a different EQ sound when done with ASIO drivers than with Microsoft Sound Mapper. And seeing as most people when playing back this file will use an application i.e. Winamp / Itunes that uses MME type drivers, they're not
• SOUND FORGE

  2 answers, most recent on 7/5/2021

  [Solved] DDP Export Error using SoundForge Project file
  New installation of Soundforge 15 Pro (build 57). When I open a stored Soundforge project I can use the CD Authoring facilities to burn a disc using the disc-at-once option under Tools with no problem. However, if I try DPP Export from the Sound
• Other products

  One answer, on 5/26/2021

  [Solved] Magix Intermediate Render Format Disappeared
  Hello! I have Vegas Pro 18 and it's always worked fine. Today, however, I opened it and attempted to render something out in Magix Intermediate format, but that render format is now missing. I tried to reset the preferences but to no avail. I really