• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Mark, if you want to get your hands dirty, investigate booktyping your disks. Setting the booktype to "DVD-ROM" apparently helps a lot with compatibility with other DVD players. My Liteon DVD drive (an iHAS324) actually had a firmware
• Movie Studio

  46 answers, most recent on 4/10/2025

  RE: Stereo not supported - burning disc
  ...HEVC (h.265) export vs the Blu-ray disc, h.264 (AVC) encoding is not a valid comparison, these are 2 different encoding formats using different encoders.... Ok I understand the reasoning for this although a bit strange for the program to do this
• Movie Studio

  66 answers, most recent on 1/29/2025

  RE: The output formats are messed up in Movie Studio 2024
  @clement5, @AAProds Hi John C , Al . . . . . If you do, perhaps try downloading it again. If the problem persists there may be a glitch in your copy of MSS 2025 . . . . The file has been downloaded 3 times, and each time it is 'broken', the
• Movie Studio

  8 answers, most recent on 9/6/2023

  RE: Magix 2024: dvd plays on PC but not on dvd players!
  @Don-Fredrick Hi Don. Glad you have a resolution to your problem. The thing is Magix Movie Studio is designed to work with Windows 10 and 11 and with more modern computer components. Especially the encoding and processing capabilities found on new
• Movie Studio

  15 answers, most recent on 7/5/2024

  RE: Puting finished movie with Title Page + chapters onto a USB stick ?
  Hello again everyone, and thanks AAProds for joining the discussion,,, oh you guys gave me a bunch great suggestions and info, much appreciated :)   Gonna try test out some of your ideas tonight ,,, i will be out this weekend ,,,, but come Monday i
• Movie Studio

  51 answers, most recent on 1/30/2024

  Dual Layer DVDs - atrocious luck or is just my project
  Project all done, burned as an IMAGE not a physical test: files play fine. (MEP 2020) then attempted to burn to a DL dvd just doesn't want to do it. after the initial failure i even made the size smaller maximum size but that didn't work. i even
• Movie Studio

  61 answers, most recent on 7/25/2024

  RE: My MAGIX software will not cut a DVD to Disc
  @rickduley Hi. @johnebaker answered that question in his last reply. The last bits of system information missing from your signature and what you have told us so far that may give us clues are, amount of motherboard ram and amount of free space on
• Movie Studio

  13 answers, most recent on 10/23/2024

  RE: What is the Movie Studio minimum requirement for Blu Ray burner for PC
  @Rudolph-Wesel @Rudolph-Wesel I found this on the LG site regarding specifications for burning a large Blu-ray disc. CPU Intel@Pentium D 3.2GHz or Higher (with USB 2.0) Recommended Intel Core 2 Duo P8600 2.4GHz or higher HDD 30GB or more of
• Movie Studio

  3 answers, most recent on 1/4/2024

  RE: Blu-ray menu chapters not working
  @MikaS Hi . . . . burn an image . . . . Does the image (ISO file) play correctly in VLC and PowerDVD. Right click the image file and select Open with... , Windows Explorer or if the option is present Mount. This will mount the ISO file as a disk
• Video Pro X

  12 answers, most recent on 10/8/2023

  RE: splash screen block error message
  @AAProds @Former user @CubeAce Thanks everyone for your help. Yes, I did create a file to burn to a Blu-ray disc using an external drive as storage, which at the time was designated as "G". Sometime after that Google Drive was "mysteriously"
• SOUND FORGE

  9 answers, most recent on 5/17/2023

  RE: Sound Forge 17?
  Thanks rraud, the CD-A did come with my SFP-10 but I couldn't get it to perform like SFP-10 in Red book issues, so I only used the SFP-10. Yes I only burn them at (DAO) and I always keep the Red Book checked in the "Options / Preferences"
• Movie Studio

  15 answers, most recent on 7/5/2024

  RE: Puting finished movie with Title Page + chapters onto a USB stick ?
  @VHS_guy_2019 Yes, the great DVD conundrum. It really is a pity that there is no practical way of replicating a DVD to be played from a USB stick on a TV. However, you have deduced the various replacement options, and Magix will easily and quickly
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  Sorry emmecs Topic title corrected I tried aaprods Imgburm again this time (i tried twice) and was successful but each time the disc was ejected blank. This nay be my learning it after briefly looking at the Dual Layer thread guide on the Imgburm
• Movie Studio

  No answers, created on 5/21/2023

  Cannot burn a DVD.
  I have used Movie Edit Pro 2013 for several years to make DVDs of my vacations. Recently I purchased Magix Movie Studio 2023 Platinum to enhance my endeavors. Being familiar with the basic concept I quickly assembled my photos and sounds for my
• SOUND FORGE

  9 answers, most recent on 5/17/2023

  RE: Sound Forge 17?
  Sound Forge Pro 10 was so strict that if I didn't post a copyright year in the Summary, it would ruin my CD. I have burned many CDs in my tenure but I have never encountered that issue... but I always used CD Architect, which was included with
• SOUND FORGE

  4 answers, most recent on 9/24/2023

  RE: How can I open my CD Architect (.cdp) projects in Sound Forge?
  I have read that CD Arc users have difficulty burning CDs with 5.2 running under Windows 10. Yes, that has been reported a few times, I am not sure it is common to every Win10/CD Arc user or just on specific systems. My Win 10 PC (laptop) does not
• Movie Studio

  26 answers, most recent on 1/17/2025

  RE: Blu ray disk chapters blank
  Hi @johnebaker I don't want to be rude but I am more than 30 years of software engineer so I am aware the difference between burning an ISO or a data DVD (your point 2). I made several DVD and BD with PowerDirector so I consider myself confident on
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @mark-perry Just recapping slightly: I believe you can create an .iso (image) file of the project. Is that correct? But when you come to burn that .iso to disc, using a variety of burning software including ImgBurn, the write fails, always. Is that
• Movie Studio

  46 answers, most recent on 4/10/2025

  RE: Stereo not supported - burning disc
  @BrenyC Hi Brendan . . . . However this has thrown up a new problem that it now shows a message to ' update your graphics card driver. Hardware encoding has been deactivated' . . . . Unfortunately this is a deficiency in the RTX series of GPU's in
• Movie Studio

  51 answers, most recent on 1/30/2024

  RE: Dual Layer DVDs - atrocious luck or is just my project
  @ericlnz Hi Thanks for the info, so far they do not appear to have reduced the quality of the Verbatim discs. The Verbatim majority of Verbatim discs I use now are DVD-RW and BD_RE for test burning, usually with DVDA , and final testing before I
• Video Pro X

  18 answers, most recent on 6/8/2023

  RE: Possible Bug in VPX14 and MMS2023 - Mixer FX and Mastering crashes
  Crash and burn here (MMS 2023). Tried to send the crash log, "can't, you may not be connected to the Internet". Yeh right. Tried to display crash log: nothing happened. 👺
• Movie Studio

  13 answers, most recent on 10/23/2024

  RE: What is the Movie Studio minimum requirement for Blu Ray burner for PC
  @Rudolph-Wesel @Rudolph-Wesel I found this on the LG site regarding specifications for burning a large Blu-ray disc. CPU Intel@Pentium D 3.2GHz or Higher (with USB 2.0) Recommended Intel Core 2 Duo P8600 2.4GHz or higher HDD 30GB or more of
• Movie Studio

  2 answers, most recent on 4/5/2025

  how to make a bluray menu for 76 videos
  I have a bluray disc project with 76 videos (chapter markers generated automatically) it comes to around 22 gig it burns fine but when I try to play it on my smart tv (via blu-ray player) only the intro clip plays and arrives at 1st page (with title
• Movie Studio

  44 answers, most recent on 1/17/2025

  RE: Making Blu-rays
  @donjen33 Hi . . . .  chose MPEG-2 as the format so I’m now wondering if I should’ve chosen H.264 . . . . H.264 is the standard codec for burning Blu-Ray. While MPEG-2 is supported, and occassionally used for its alleged better quality video, though