Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

We already went well off-topic in this thread, but just to add a few remarks: That is ridiculous and you cannot blame the program for that, as it only uses about 6% in task manager here. Well, I just discovered that this problem occurs when I use

Video Easy

5 answers, most recent on 7/13/2017

RE: setting display times

My 'video' consists of 40 still images, either .jpg or .png. I am not using video clips in my project.I want to control the display time of the images.I can edit the display time of each image by double-clicking the timer that is embedded there. I

Video Pro X

One answer, on 7/5/2017

VPX update to 15.0.4.171

There was an update yesterday for VPX(9). Changes in version 15.0.4.171: Fixed various errors with transitions Fixed rare crash during loading/adding video effects via the context menu Fixed error with mixing material with Alpha Fixed error that

Movie Studio

3 answers, most recent on 6/27/2017

RE: Multicam audio question

I also had to do this quite a bit in my recent project, and did it basically as Jeff describes. Regarding Jeff's caveat, I found that, after inserting the cut audio, it helps to extend it a bit to either side to create a crossfade. You may also have

Samplitude

One answer, on 6/8/2017

RE: HOW DO I EDIT A TRACK IN THIS PROGRAM EFFICIENTLY?

Hi, welcome to the Magix forums. First please do not POST IN CAPITALS! It is considered to be shouting and will not endear you to other posters. Have you checked video sites like YouTube, using search terms like "comping", "mixing", mixdown", "vocal

Movie Studio

16 answers, most recent on 6/5/2017

RE: Movie Edit Pro Plus 2017 close

Hi again ali. The answer to your question is quite honestly, no-one knows! You are far from being the first to report this and, as far as I can tell, no-one has discovered the answer. It's actually happened to me, on occasions, without warning. And

Movie Studio

8 answers, most recent on 5/12/2017

RE: How to make an audio track sound distant or in the backround?

Hi, Er, I did tell you how to open the Equalizer. Look in the Tutorials section of this site. Also read the PDF manual.

Movie Studio

8 answers, most recent on 5/12/2017

RE: How to make an audio track sound distant or in the backround?

Hi, I'd probably just lower the volume and use one of MEP's audio filters. With the music selected on the timeline:Right click > Load audio effects > Choose to suit, largely by trial/error. (And have fun while experimenting!) Or you could try

Movie Studio

15 answers, most recent on 5/18/2017

RE: DVD burning problems again MEP 16

Done some more tests and still cant get it to burn to a disc. Not even the 'image record' way this time. Ive changed the render folder to the C drive thinking it might be an issue with the HDD I keep the render files in but its still the same. Here

Movie Studio

15 answers, most recent on 5/18/2017

RE: DVD burning problems again MEP 16

Hi again, Just returning for a second to the part of the error log you posted, I'm still concerned about the mention of a Split Point because the log shows that MEP was going to split your file a very short way from the end, i.e. it was going to

Movie Studio

10 answers, most recent on 5/9/2017

RE: One object imported - 3 tracks occupied

Hi Terry . . . . Different audio sources are getting played in different speakers. Should I not always get sound from all six speakers, albeit at varying levels, never complete silence? . . . . No, it all depends on the sound source and format eg: -

Movie Studio

13 answers, most recent on 5/7/2017

Locked audio track not protected?

I rarely use audio effects but the narration in my current project seems to need some 'lightening'. My voice sounds sort of 'boomy'. (Reckon I'll have to be more careful about how I hold the mic.) Anyway, using Audio Cleaning > Equalizer I

Movie Studio

25 answers, most recent on 5/8/2017

RE: No way to know level in Audio object Handles

HI Jeff For my all my video projects I adjust the individual audio at object, or track level, to balance the sound levels to what I want, then use MDynamicEq as a Master FX to equalize and limit the audio to -6 dB. This is the best setting I have

Movie Studio

13 answers, most recent on 4/26/2017

RE: Object selection arrows - obscure quirk

Hi John CB . . . . But, if I select a video clip and press on 2, the video is inserted but so is a gap after it of equal length. This is irrespective of the mouse mode. . . . . No issue in VPX or MEP Premium here- works as it should - no gap. Mouse

Movie Studio

13 answers, most recent on 4/26/2017

RE: Object selection arrows - obscure quirk

Hi, I can go back to bed now; I've learned one new thing today. I noticed the arrows before and never used them or even looked to see what they could do. I tried this in VPX and at first I could not reproduce the problem using my clips, but I could

Audio Cleaning Lab

One answer, on 4/20/2017

RE: Freezing

In order to have any chance of being able to suggest remedies to this problem we need a lot more detail. First, please read https://www.magix.info/uk/forum/please-do-the-following-before-posting-your-question--621831/. Although it mentions Movie

Movie Studio

4 answers, most recent on 4/6/2017

RE: [Closed] Blurring only part of the video [Movie Edit Pro 2015]

Hey there. Is this thread still active? I am using the mask you uploaded to dropbox a while ago but turned 180 degrees and for some reason I can't seem to get it to mask the line in the middle of these two videos. Here is an image of the

Movie Studio

27 answers, most recent on 3/19/2017

RE: New Blue Essentials: Auto Contrast puzzle

Hi Terry The result you are getting is correct for this low saturation / contrast image, whether you use the NB effect, MEP's contrast control or Paintshop Pro's contrast control. As you can see from the Histogram in PSP this image has very little

Movie Studio

19 answers, most recent on 12/23/2017

RE: 4k Performance with Kaby Lake i7

Hi Al . . . . is not a fair performance comparison . . . . Agreed, however I think you missed the point of my post: If I can run Movie Edit Pro Premium, on an i5-4670K, editing 4k video satisfactorily, with smooth playback, except for a few effects

Movie Studio

9 answers, most recent on 1/16/2023

RE: convert left channel mono to stereo sound

I know this thread is already several years old, indeed I commented so myself in an earlier post, but just in case someone else finds it in the future whilst searching for a solution to the problem of audio in one channel only, I wanted to add one

Other products

7 answers, most recent on 2/15/2017

RE: Audio Level for TV

Hi friends! I recently updated Pro X to Video Pro X8. It has got a new option in addition to the standard Normalization, called "Normalization (EBU R128)". Magix has made this a fully automated option without any adjustable parameters, which is

Movie Studio

24 answers, most recent on 2/7/2017

RE: Animated arrows, circles, squares, callouts: Does Magix have them?

If you are basing your choice of an editing product on animated arrows, checkmarks and circles, you are doing yourself a disservice. Since most of us don't have Camtasia and don't know what these effects are specifically, instead of us looking it

Music Maker

5 answers, most recent on 12/31/2016

RE: Recently Purchased Software Need Help Arranging Loops

Hi, Once again, I got logged out before finishing the comment and pressing the button and lost everything, so here I go again. My tutorial will give you some tools to get started and you should definitely watch it to make sure that you have

Movie Studio

4 answers, most recent on 12/27/2016

RE: New User Issues 2016 Movie Edit Pro (US version)

Hi jay-j, welcome to the User to User forum for MAGIX video (and other) products. Almost all the contributors here are users like yourself so none of us can speak "officially", as it were... To take your questions in reverse order, CATOOH is an