• Rescue Your Videotapes!

  6 answers, most recent on 8/2/2022

  Program not recognising my VHS player
  Hi. Just purchased and installed this program and its failing to recognised my devices when i am in the import screen. I am trying to import from a Goodmans TV VHS combi. All and any help appreciated. Regards
• Movie Studio

  17 answers, most recent on 8/22/2022

  RE: Magix Video Resolutions Incorrect?
  @CubeAce If you have an OLED or quantum dot LED TV you will not see a black bar on the screen as they have 'perfect black' screens as those pixels are effectively turned off and do not rely on back screen illumination. Ray, what I was getting at was
• Video Pro X

  41 answers, most recent on 10/16/2022

  RE: Cant edit 4k videos nicely.
  @CubeAce Ray, @macarrao is using proxy files. I doubt whether VFR is an issue. In my experience, recent phones cannot be locked to a framerate, despite what the settings can be put on. The settings are only the target, with the lighting determining
• Movie Studio

  24 answers, most recent on 8/1/2022

  RE: Fail to adjust the frame rate for blue-ray disk (BD)
  @ericlnz Hi Eric . . . . .But remember bitrate is measured as bits per second. . . . . That is correct however, . . . . The image size and number of frames per second don't come into it. . . . The same bitrate used to export 25p andf 50p should
• Other products

  9 answers, most recent on 9/10/2022

  Can corrupt (?) AVI videos be repaired?
  I've got a few racing downloads and find they play OK on a PC but sometimes my Laser media player or Panasonic dvd (media) player won't play it...or be it the Laser says problem with the video but only the audio can be heard. Also it can only FF at
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @nicolesharp100 Hi . . . . Simply loading the video into Video Pro X14 and then exporting it as HEVC with the best possible settings (for a 60 MBd video) will reproduce the compression artifacts. . . . . Why are you still exporting at 60Mb/s? As
• Movie Studio

  17 answers, most recent on 8/22/2022

  RE: Magix Video Resolutions Incorrect?
  @AAProds Hi Al. If you have an OLED or quantum dot LED TV you will not see a black bar on the screen as they have 'perfect black' screens as those pixels are effectively turned off and do not rely on back screen illumination. While I agree it is a
• Movie Studio

  32 answers, most recent on 10/18/2022

  RE: "Wrong" 4:3 images should have been 16:9 to fil TV screen
  @FF22 Forget this "use the entire sensor" and them crop them accordingly. I wouldn't worry about that. It is merely marketing blurb... "we made this great 4:3 sensor and you don't want to use the top and bottom? Shock horror!" they say. The fact of
• Movie Studio

  18 answers, most recent on 12/26/2022

  RE: MainConcept MPEG-4 codec not working
  Hi John, I've been occasionally dipping into the forum and so was optimistic I could rely on you champs to get me out of trouble! You're all so far ahead of me now that any further posts from me will be in asking rather than helping mode. Are you
• Movie Studio

  17 answers, most recent on 8/22/2022

  RE: Magix Video Resolutions Incorrect?
  @AAProds Hi Al. Video resolutions are historically based on camera sensor ratios which are generally 4:3 (As in 35mm and 70mm film stock) so 4K would be 4096x2160 of which I can set both my video cameras to capture. This gives some leeway when
• Photostory

  26 answers, most recent on 8/17/2022

  RE: Burning a DVD
  @Robert-Swope It’s excellent news that the original problem is now resolved so thank you for the update. To be honest I’m not surprised that the original burner was too old for the task. When you stated earlier that this was a “new” computer both
• Video Pro X

  42 answers, most recent on 9/25/2022

  RE: Question regarding video upscaling
  @jak.willis For export, I'd use the MPEG-4 menu (which will give you H.264/MP4). MP4 will be the most compatible format. Set the export up for: - 1920x1080 (should already be there for your lovie parameters) - Frame Rate 25fps - Ratio 16:9 Like
• Movie Studio

  24 answers, most recent on 8/1/2022

  RE: Fail to adjust the frame rate for blue-ray disk (BD)
  @ericlnz Hi Eric. The last analog TV transmitter was switched off in Northern Ireland in 2012. All UK television transmission is now digital. Ray. Yes it may be digital but it's still interlaced.
• Video Pro X

  22 answers, most recent on 8/25/2022

  RE: Crackling sound (only in Video Pro X)
  @Matt-Braun Hi I can see nothing wrong with the video it looks like this is from a Sony or Panasonic camera. If Alwyns @AAProds suggestion does not fix the issue, try increasing the audio buffer size in VPX - these are the settings I use Your
• Rescue Your Videotapes!

  17 answers, most recent on 8/16/2022

  RE: Widescreen video not recording as widescreen.
  @AAProds, @emmrecs Hi Alwyn, Jeff Unfortunately, I do not agree with either of you ! 😱 @mark.s.witty commented - 'You View set top box SCART' The only 'You View set top box' I can find are the Humax DTR-series, they are Digital TV Recorders which
• Movie Studio

  17 answers, most recent on 8/22/2022

  RE: Magix Video Resolutions Incorrect?
  Sony thinks 4k is 3840 x 2160 as well: https://www.sony.com/electronics/support/articles/00044504 As does virtually every other Google hit on "what is 4k". Despite that, I now see the technical difference between UHD and 4k. Which raises a question:
• Video Pro X

  42 answers, most recent on 9/25/2022

  RE: Question regarding video upscaling
  @jak.willis Hi, a video or picture image is made up of tiny dots called pixels, when you upscale an image those pixels get spread apart & would leave gaps but your software fills them in using the nearest pixels, Any upscale of a video/picture
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @nicolesharp100 Hi . . . . Simply loading the video into Video Pro X14 and then exporting it as HEVC with the best possible settings (for a 60 MBd video) will reproduce the compression artifacts. . . . . Why are you still exporting at 60Mb/s? As
• Movie Studio

  12 answers, most recent on 7/31/2022

  RE: How to import new transitions, presets and templates for VHS effects
  @johnebaker Hi John. There certainly is such a thing as vintage transitions. I worked at Presbury's Screen Publicity and they invented the rotating star burst between commercials for ITV (remember those?) among other transitions and also later when
• Rescue Your Videotapes!

  16 answers, most recent on 3/15/2023

  RE: captured video very poor quality while playback on TV is perfect
  @Ove5868 To answer the question what TV I used : A Samsung 55" ... 3 years old. The picture, as expected, was grainy but it didn't have the "flagging" or waviness to it, nor was the "pink noise" showing on the screen. It also looked like the two
• Movie Studio

  24 answers, most recent on 8/1/2022

  RE: Fail to adjust the frame rate for blue-ray disk (BD)
  @dirkc_be . . . . don't support - by default - the 1080i 50fps video's. . . . . The interlaced format and frame rates are 'left overs' from when the old CRT TV's and monitors which supported frame rates of 25 fps (PAL) and 29.97 fps (NTSC) were in
• Movie Studio

  12 answers, most recent on 7/31/2022

  RE: How to import new transitions, presets and templates for VHS effects
  @johny_lovin_it Newblue has an RGB fx, add in some scanlines, vertical hold effect like @johnebaker shows, a bit of noise, some colour degradation & maybe a bit of ghosting, All those you mention could be done but you'd have to get creative if
• Movie Studio

  12 answers, most recent on 7/31/2022

  RE: How to import new transitions, presets and templates for VHS effects
  @johny_lovin_it Newblue has an RGB fx, add in some scanlines, vertical hold effect like @johnebaker shows, a bit of noise, some colour degradation & maybe a bit of ghosting, All those you mention could be done but you'd have to get creative if
• Photostory

  26 answers, most recent on 8/17/2022

  RE: Burning a DVD
  I was finally able to burn a DVD of my Photostory Deluxe slideshow. It seemed that much of the problem was related to outdated hardware. I had to purchase an LG DVD Writer to by-pass the burner in my computer and then a new Sony DVD Player to