• Movie Studio

  2 answers, most recent on 4/26/2019

  [Solved] Burn DVD with MEP 2016 Premium
  This is my newest MEP, Ver 15.0.0.114 (UDC2) I usually render to MP4, but now a friend wants a film on DVD. But the program says NO! "Not available due to licensing conditions." Neither DVD nor BD, but AVCHD works. Have I, a few years ago, bought
• Movie Studio

  8 answers, most recent on 4/25/2019

  [Solved] Different Versions of MEP Opening Incorrectly?
  Hi Gang I was under the impression if you're trying out different versions of MEP 'they will live together'? Unless I've missed something, an MEP15 project seems to only open with MEP18? As for the latest version of MEP18 (its only my opinion), the
• Movie Studio

  6 answers, most recent on 4/24/2019

  RE: [Solved] MEP Plus 18 - Sound Track Falls Behind
  Have convinced myself MEP18 simply will not process certain QT files reliably. I've resorted to converting any QT files to MP4 for reliable output. Fini ...
• Movie Studio

  6 answers, most recent on 4/24/2019

  [Solved] MEP Plus 18 - Sound Track Falls Behind
  Hi Gang I'm still feeling my way around 18 - never had this problem with earlier versions. I've tried to export to H.264 MP4 several times. Each time I used a different portion of the same clip. And everytime the sound looses its sync with the video
• Movie Studio

  8 answers, most recent on 4/20/2019

  [Solved] MEP 18 Plus - Extra Cost for H264 Codec?
  Hi Gang I just recieved MEP 18 Plus and will install it soon - I have Two Main Questions: I prefer to choose when updates are installed, with regard to the (Update Service). Is that an option? Let me be clear: I'd rather NOT have those updates
• Movie Studio

  6 answers, most recent on 4/19/2019

  RE: [Solved] MEP17 vs. MEP18
  According to Magix system requirements I should be fine with MEP 18 Plus
• Movie Studio

  6 answers, most recent on 4/19/2019

  [Solved] MEP17 vs. MEP18
  Hi Gang I ordered a (non registered) version of MEP17. However when I read the reviews it appears people were having trouble 'saving data' - there were very few positive reviews. I haven't recieved it yet and I may decide not to use it. Instead I
• Movie Studio

  27 answers, most recent on 4/14/2019

  RE: [Solved] Any Adjustment Needed For New GForce GT710 1GB Video Card?
  @CarpentersMate . . . . MEP15 will not allow me to export to MP4 @ 1080X720 . . . . Is 1080x720 a typo? Do you mean 1280x720 ? If you do need 1080 x 720 there is not a default preset, in any version of MEP, for this, however you can create one as
• Movie Studio

  One answer, on 4/12/2019

  [Solved] MEP15 (Project File Contents) and Successful Render
  Hi Gang I was wondering if 'sound effects' could be inserted onto the timeline from a different folder (other than the project folder)? 'Sound Effects' could create quite a large folder - its more practical to store them in catagorized folders
• Movie Studio

  27 answers, most recent on 4/14/2019

  [Solved] Any Adjustment Needed For New GForce GT710 1GB Video Card?
  Hi Gang I'm using MEP15 - I know some versions of video editing software require adjustment/tweaking when you swap out/upgrade a video card. I just picked up a GForce GT710 - driver loaded fine - works fine - but is there any adjustment needed? I
• Movie Studio

  2 answers, most recent on 4/8/2019

  [Solved] Why is my Audio frame rate showing differently to the Video frame rate
  Is this info from MediaInfo correct or is there something not being read or written correctly in the file? It's not causing problems in MEP but I'm curious if anyone else has ever seen something similar. I am using the most recent update of
• Movie Studio

  5 answers, most recent on 4/6/2019

  RE: [Solved] Adjusting True Black & White Color
  @CarpentersMate Hi There are a number of ways you could try depending on what you are trying to correct:- If you are trying to remove a colour cast the use the dropper tool in Effects>Colour>White Balance and click on an area of the image in
• Movie Studio

  2 answers, most recent on 4/4/2019

  [Solved] Can you Increase the Number of Tracks available
  Is it possible to increase the number of Tracks? I cannot see any reference to this in the Manual. I am just finishing off a short family video and thought I would end with a video wall of 16 short videos. Eight seem to be the default setting in MEP
• Movie Studio

  4 answers, most recent on 3/31/2019

  RE: [Solved] Art filter Erosion don´t show after export to mpeg in MEP Prem
  @Gunnar-Sallstedt Hi Gunnar . . . . . effect does not show on the exported mpeg4 . . . . What erosion setting are you using, I have found that in the exported mp4 the 'intensity' of the erosion is very much reduced. In the image below the right
• Movie Studio

  4 answers, most recent on 3/31/2019

  [Solved] Art filter Erosion don´t show after export to mpeg in MEP Prem
  Have used art filter Erosion to get a feeling of "sitting in a van Gogh painting". It looks okey in Project but after export to, for instance Mpeg, it is lost when playing the mpeg. Under effects I use "Apply video effects to all of the
• Movie Studio

  15 answers, most recent on 5/30/2019

  [Solved] No audio in last section after export to MPEG 4
  I have six relatively short clips (all 640 x 480 @ 30fps) that I have edited and which on playback lasts for around 2 minutes. Viewing in MEP (18.0.2.235) it plays ok. However after exporting to MPEG 4, on playback, the last 20 second sequence (is
• Movie Studio

  2 answers, most recent on 3/6/2019

  RE: [Solved] Handles in timeline dissappears
  well---played a little around myself (have tried before. though) It seems that the track height in the editor is causing this problem, strangely enough I have not changed that, and for me it seems that MEP "adjust" the height according to the amount
• Movie Studio

  2 answers, most recent on 3/6/2019

  [Solved] Handles in timeline dissappears
  I have a project that contain video-clips from 5 different cameras. When I moves all the clips to the timeline for editing, the handles to start or stop fade (the little white dot) and the transitions icons are gone. Open a new blank project with
• Movie Studio

  30 answers, most recent on 3/5/2019

  RE: [Solved] save error
  @Ron-2019_. Hi See this article and add Movie Edit Pro to the white list. You may need to navigate to the MEP executable which is called videodeluxe.exe and should be in the folder - C:\Program Files\MAGIX\Movie Edit Pro Premium\2019 if you used the
• Movie Studio

  14 answers, most recent on 2/23/2019

  RE: [Solved] What is the maximum framerate to edit (slowdown)
  @Jeroen-vandeLogt Hi Thanks for the clip. I can confirm that it imports into MEP 2019 with no issues. Therefore I would recommend you upgrade MEP to this version to avoid the problems associated with file conversion. . . . . I am not familiar with
• Movie Studio

  5 answers, most recent on 2/19/2019

  RE: [Solved] Using Design Elements - Complex Geometry, Power of Simplicity, etc...
  @Dale-Bryan Hi Design elements are fairly straight forward to use - ensure you have all the images/video clips on the timeline, select the first object the element is to be applied to and add the element - see video below Note: Different design
• Movie Studio

  3 answers, most recent on 2/14/2019

  RE: [Solved] cant open MP4 file
  @Brynjar-Gudmundsson Hi The error message would suggest that Corel Video Studio has not removed the file association from the mp4 files and I guess you are double clicking the file in Movie Edit Pro (MEP). The mp4 file association requires resetting
• Movie Studio

  2 answers, most recent on 2/7/2019

  RE: [Solved] Can I easily convert "takes" to "mp4s"?
  @Jayessarr Hi . . . . . can I easily convert these .tk2 files into .mp4 files in one go . . . . You actually do not need to convert the take files to mp4 there is an alternative method which is quicker, however it does depend on 3 conditions: You
• Movie Studio

  2 answers, most recent on 2/7/2019

  [Solved] Can I easily convert "takes" to "mp4s"?
  Hi, I am using the "scene recognition" feature to split a long clip into each individual shots. Works great, finds each shot very well. I end up with multiple clips which I have saved as "takes" using the "save all scenes as takes" checkbox in the