• Movie Studio

  10 answers, most recent on 2/2/2023

  RE: Movie Studios 2023 - Toolbar problems
  @Mike-Yorkshire Hi Mike. The graphics card should be OK if you are not using higher resolution video clips. I was using the same card before I swapped my GT 1030 Graphics Card for a more powerful one as it is not that powerful. It was struggling
• Movie Studio

  15 answers, most recent on 9/26/2022

  RE: hevc-codec
  @johnebaker Hi John. The Intel(R) Core(TM) i5-6200U CPU specs page. Says Intel® HD Graphics 5500. Ray.  
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @AAProds Hi Al. Thanks for the conformation about what NeatVideo is capable of. I wasn't sure. I don't know if you are aware but Google is running YouTube at a loss. Mainly due to storage space and some content providers that supplied 4K video
• Music Maker

  5 answers, most recent on 11/7/2022

  I'm having an issue with one song that plays then cuts out
  I seem to be having an issue with one song that I produced, audio plays then like half way through I hear a high pitch beep then audio cuts out!. Just spent a couple of hours trying all different audio combinations and it still happening on this one
• Movie Studio

  17 answers, most recent on 8/22/2022

  RE: Magix Video Resolutions Incorrect?
  Hi All I think we had a similar discussion not long ago, but it is good to see YT does not call 1280x720 HD which is good, because if 1920x1080 is (Full) HD then 1280x720 shoud be 1/2 HD in my opinion because you can not get any more Full than Full,
• Video Pro X

  31 answers, most recent on 12/13/2022

  RE: PNG loss quality when I export video in MP4
  @Artorias93 Hi and welcome to the user to user forums. The problem is your png file will probably have more resolution than the video file and show as it should normally look in the editors' monitor but once the file is encoded to a standard video
• Movie Studio

  5 answers, most recent on 9/27/2022

  RE: Program Stops Responding After Slightest Action
  @Robyn-Kitty Hi Robyn and Welcome to the user to user forums. As Jeff has alluded to, your Inboard Intel HD630 GPU should cope but it could depend on the file type and how many bits per second is needed to process the file in real time. I have
• Movie Studio

  One answer, on 9/20/2022

  [Closed] Hello! I have a problem and I want you to help me. For several years I
  Hello! I have a problem and I want you to help me. For several years I have had the program Vegas Movie Studio HD Platinum 11.0 I want to install the same program on my laptop. I did everything right, I saved the file on my laptop, but when I tried
• Photostory

  8 answers, most recent on 2/15/2023

  RE: Inability to insert a video in a project on Photostory DeLuxe 2022
  Hi Jeff, Thanks very much for looking into this for me. The information that you are after is set out below: Device name    Bhaskar2018DesktopProcessor    Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz   3.19 GHzInstalled RAM    16.0 GBSystem type  
• Movie Studio

  15 answers, most recent on 9/26/2022

  RE: hevc-codec
  @Eduardo-Santos Hi Eduardo and welcome to the user to user forums. The reason you may be having difficulty with your video files is your computer specs are not really up to spec for editing 4K material easily. You would have no hardware acceleration
• Movie Studio

  16 answers, most recent on 1/30/2023

  RE: Downloading video from Sony FDR AX70 to computer
  @lindeanlad Hi To transfer video files from my AX53E (very similar to the AX700 you have) with the camera switched off try the following: Connect the camera by USB cable to the computer  Switch the camera on, the camera screen should show a message
• Movie Studio

  20 answers, most recent on 5/1/2023

  RE: upgrade
  @Larry-Burkholder I am somewhat confused by this statement. I have re-installed all NB Effects acquired with my purchase of MAGIX Video Pro X14 and also those acquired after purchase, from NB. The NewBlue Total Effects package (which is what I
• Movie Studio

  18 answers, most recent on 11/30/2024

  RE: MPEG-4 codec problem
  I have Windows 10 and mainly I use HD video clips (Gopro 8, handy and my Panasonic video camera clips). Until last thursday everything was fine, but saturday nothing works. I have tried everything I know, but no?!?
• Movie Studio

  27 answers, most recent on 12/12/2022

  RE: Exporting misses some videos and photos from the timeline
  Guys, Its been a while since I started this post and I thought I would give you an update. I decided to not upgrade at the moment as prices are artificially high and stocks are low (thank you China!) Instead I have been looking for a work around
• Movie Studio

  296 answers, most recent on 3/29/2025

  RE: [Closed] Feedback on Movie Studio 2023
  The post is a copy of the message previously sent to support. There has always been a problem with exporting full width 4k 3D videos, but anamorphic output always worked. It is strange that the 3D selection is connected to the failure. In the past I
• Movie Studio

  84 answers, most recent on 5/20/2023

  RE: Benchmark for Movie Studio 2023
  @Former user Hi Gid. Now you see that is also interesting because during playback in either program I don't see a lot of difference in what the task manager is showing me but in MEP 2022 playback stutters and in VPX 14 it doesn't. There is the bare
• Movie Studio

  8 answers, most recent on 12/10/2022

  RE: Video "stutters" every 34 seconds after rendering.
  @Steve-H Hi Is the source video variable framerate ? if you are not sure, download and install MediaInfo and analyse the clip, see this tutorial on how to setup MediaInfo and analyse a video clip for all the data required.   In the video section of
• Movie Studio

  16 answers, most recent on 12/21/2022

  Movie Studio freezes when editing multiple 3D videos
  I have been trying to edit a set of 3D HD movies which were created as side by side ~60HZ frame rate.  The files and a screen shots of the project are at: https://1drv.ms/u/s!AgEkZSUlkAcxgb0eg2M8ATSCee6zgQ?e=p0ch4r I first tried to import the videos
• Movie Studio

  10 answers, most recent on 11/14/2022

  RE: Software takes too long to export
  @tiisetso-masisi Hi. This is my opinion based on my personal experiences and near the edge now of what my system is capable of with the latest video editing software from Magix. A lot will depend on what you are editing. 4k video needs much more
• Movie Studio

  26 answers, most recent on 1/5/2023

  RE: My Ultimate Version 2023 will not read MP4 files...
  @johnebaker Unfortunately the Intel HD Graphics 4000 in the processor cannot be used for decoding/encoding of video, the upgrade has tipped you over the limits of the PC capabilities. John, this is misleading. I've got three computers here which run
• Movie Studio

  40 answers, most recent on 12/17/2022

  RE: How to export a movie in portrait format (for upload to Twitter)
  Hi Liam. Since the beginning of November Microsoft have being playing around with how text is interpreted and displayed within Windows 10 and 11 and has reeked havoc on some applications and as far as I'm aware is still an ongoing process along with
• Video Pro X

  46 answers, most recent on 12/8/2022

  RE: HEVC compression artifacts
  @johnebaker High John. Those videos only have a 1080p maximum viewing option. LTT and other sites also have the same applied on some but not all their videos. I don't know if this could be a transitional stage or not. I don't know if some of the
• Movie Studio

  296 answers, most recent on 3/29/2025

  RE: [Closed] Feedback on Movie Studio 2023
  Movie Studio 2023 and 2022 both have a problem with creating a 4k 3D full width side by side MP4.  When I setup the settings as shown in Settings.png I get the error message upon attempt to output shown in “error message.png”  The partial output is
• Movie Studio

  2 answers, most recent on 10/21/2022

  transitions not working
  I am using Movie Studio 2023 and I cannot get most of the transitions to work. I know how to apply them, but when I hit play, there is no transition at all. Just a black screen between pictures. I saw other posts with the same issues. I already