Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

@charles-t Go into the program settings (gear icon in the top left), go to the tab "Audio / MIDI", select Magix Low Latency as your ASIO driver. Click on the "Advanced..." button which will open the Magix Low Latency driver settings. On the left

ACID

3 answers, most recent on 12/22/2021

RE: [Solved] Acid Studio pitch shift to Alphabetical notes instead of tone number

Great question, and I actually didn't think this was possible. But you're correct, you have seen this in the past. I had not. For Acid to do this it needs to know the root note of the clip, which it is not possible to set on audio one shots, or midi

ACID

2 answers, most recent on 12/17/2021

RE: [Solved] Sections ghosted and unable to be moved in Acid Pro 8

is it a frozen midi track? These are 'locked in' midi tracks that are rendered out to wav when frozen. You still see them as midi tracks, but you can't edit them again until you unfreeze the track.

Music Maker

2 answers, most recent on 1/7/2022

RE: [Solved] No sound even though all other programs are closed.

@Francisco-Perez You need to set up the audio driver in the program settings. If you select Direct Sound you should get playback for audio loops. If you also want playback for your MIDI keyboard and live recording you need to select ASIO. Music

ACID

2 answers, most recent on 12/10/2021

[Solved] Multiple midi tracks in Acid Pro 10

I am trying to get multiple midi tracks in Acid Pro 10 to work with separate instances of the same soft synth, but all tracks after the first one continue to be ignored, all input going to the first track, even though subsequent tracks clearly show

Music Maker

3 answers, most recent on 12/10/2021

RE: [Solved] How do I turn on input monitoring for the MIDI virtual keyboard?

@theflyingcelery It is all described in the manual what you have to do. You need to select an ASIO driver in the program settings for monitoring. Music Maker comes with Magix Low Latency. You need to configure the driver by clicking on the

Music Maker

3 answers, most recent on 12/10/2021

[Solved] How do I turn on input monitoring for the MIDI virtual keyboard?

ARGHHHH!!! I'm using MAGIX Music Maker (version 30.0.3.39) and I want to record using the MIDI virtual keyboard. Is there any way to turn on audio monitoring so I can hear what I'm playing while I record? I've fiddled with the Audio/MIDI tab of the

Music Maker

2 answers, most recent on 11/28/2021

RE: [Solved] NO Sound

@Philyellow You need to set up the audio driver in the program settings. If you select Direct Sound you should get playback for audio loops. If you also want playback for your MIDI keyboard and live recording you need to select ASIO. Music Maker

Music Maker

7 answers, most recent on 2/3/2022

RE: [Solved] Beatbox not rendering

@Alex-OH Hi Thanks for the clarification. I have tested Beatbox and it works for me. When dragging to a track, try the following - press and hold down the mouse on the button and then move the mouse to the track you require, do not release the mouse

Music Maker

One answer, on 11/21/2021

RE: [Solved] Playback isn't working for anything. Error description below.

I should've done some more digging before posting, sorry. I opened Settings - Audio/Midi - Advanced and noticed my Bluetooth headphones were selected. Not sure why since they're turned off. But I selected the correct audio driver and that fixed

ACID

4 answers, most recent on 11/19/2021

[Solved] How can I connect Chord Jam vst (trial version) to Synthmaster etc

Hi I have Acid Pro 8 I want to connect Chord Jam vst ( I have the trail vers atm to my synthmaster soft synth or any other soft synth and play it via my Midi keyboard . I can't seem to figure out the correct way round to set this up via midi

ACID

3 answers, most recent on 11/16/2021

RE: [Solved] How do I connect the free Blue Arp vst plugin to Acid Pro 8 ?

@Rayz-R I tested it in ACID Pro 10 and it worked fine. This is how I set it up. Track 1: BlueArp with my MIDI Keyboard as input. Track 2: DN-e1 with BlueArp as Input.

Music Maker

4 answers, most recent on 11/2/2021

RE: [Solved] What do I need to do to publish my track on Spotify?

@Barak_Ben_Dov For publishing on Spotify and alike, Is it enough that I but I buy a soundpool with Commercial (Royalty Free)? Yes. You need to buy a commercial license for every Soundpool you use. If you only use virtual instruments with MIDI or

Samplitude

2 answers, most recent on 10/30/2021

[Solved] MIDI "sync issues" when looping

Hi there - using Samplitude x6 pro - and finding that the control of external midi devices (and clock out) goes "wonky" - especially when starting at the beginning of a project (i.e bar 1.1.1) and if i am working on a 4 bar loop - and timing becomes

Music Maker

4 answers, most recent on 10/26/2021

RE: [Solved] VST Plug-ins wind instruments breath control

@Mikey64 I mean the controls of the Vita Instrument GUI. If you make a right click on them you can activate MIDI learn. Then just change a controller of your MIDI device and it will be mapped to that specific control.

Music Maker

4 answers, most recent on 10/26/2021

[Solved] VST Plug-ins wind instruments breath control

I am using an AKAI EWI USB for midi controller. In the supplied Aria software for EWI I can control breath attack to put more emotion into my music. Unfortunately the supplied Ewi patches are not the best. I have purchased Brass, flute, cello vst

Music Maker

7 answers, most recent on 10/28/2021

[Solved] Can't edit MIDI notes - can only zoom

I'm using the latest version 30. I tried to simply create a new MIDI clip 1 bar in length, double click to edit it, then add notes with the mouse. I've clicked the pencil in the toolbar of the MIDI editor, and it's selected but the cursor is

Music Maker

8 answers, most recent on 9/16/2021

[Solved] No Input showing in settings

Hi, I was wondering if someone was able to help. I am trying to run a mic through a behringer Xenyx Q1202USB into Music Maker but I don't seem to be able to get the program to recognise the interface. When going into settings - Audio/MIDI, I have

Samplitude

5 answers, most recent on 8/30/2021

RE: [Solved] Does the 2017 version still work?

@Yo-Zushi Good that MME works for you. If you want to record something via a microphone or MIDI keyboard and you need live monitoring you must select ASIO, for example Magix Low Latency, because this will not work with MME. You need to enable all

Samplitude

6 answers, most recent on 8/29/2021

RE: [Solved] How to use Scaler 2 midi out to control other VST in Samplitude

@Don-P I use Pro X4 but I think that the steps didn't change in newer versions. This is how it works: Add Scaler as a VST Instrument to track 1. Add a VST instrument of your choice to track 2. Open the Scaler GUI and in the top left corner click on

Samplitude

6 answers, most recent on 8/29/2021

[Solved] How to use Scaler 2 midi out to control other VST in Samplitude

New to Samplitude so BIG learning curve. I have Samplitude Pro X5 on a windows 10 computer. Trying to use internal VSTs with midi as follows and can't figure out how to set up the channel send/receive for midi instructions to work. I want to put

Samplitude

8 answers, most recent on 8/25/2021

[Solved] Setup - Options I use do not recognize M-Audio Keystation 49es

What I need? Settings required to use my M-Audio Keystation 49es I just started trying to use the software this week and cannot get my midi keyboard to work. There is a special offer to upgrade this software to PRO but I cannot consider that if I am

Samplitude

7 answers, most recent on 8/20/2021

[Solved] Cant seem to figure out how to get started with this program

program: Samplitude Music Studio 2019 ver: 24.0.0.36 (DP3) OS: windows 10 64-bit headset: HyperX Cloud Revolver S 7.1 (USB-A) so there's a few things that I'm really struggling to figure out. the first one being that I'm trying to figure out how to

ACID

2 answers, most recent on 7/16/2021

[Solved] DIstortion/clipping in recording preview mode.

This issue is occurring in Acid Pro Suite. I have come across this issue with a few projects. Some small with only 5-10 tracks, and some with 50+ tracks. I'm recording into an Arturia Audiofuse 8 pre, and using the audiofuse asio driver to record