• Movie Studio

  One answer, on 10/21/2011

  Will Magix 17 plus hd pro import H/264 avi files
  I'm thinking about buying a 3d camcorder that produces full HD 1080p H.264 avi files but don't know whether Magix 17 pro HD plus ( and my just purchased Magix 18MX will import the files. I don't want to buy the camcorder if Magix editor can't
• Movie Studio

  One answer, on 10/8/2011

  MEP 17+ has stopped recording from mini-DV camera
  The last time I used the mini-DV was in May, and MEP's recording function worked with it fine.   The only change I made is to remove MEP16+.  When I first attach the camera and the Firewire, MEP doesn't appear on the Windows "what do you want
• Movie Studio

  2 answers, most recent on 10/8/2011

  MEP17+ won't record from mini-DV camera
  This function used to work.  The last time I used the mini-DV was in May, and MEP's recording function worked with it fine.   The only change I made is to remove MEP16+.  When I first attach the camera and the Firewire, MEP doesn't appear on
• Movie Studio

  One answer, on 10/4/2011

  MEP16: How To Burn a DVD with just Video and No Audio
  I recorded some old SILENT 8mm movies with my camcorder (digital 8) by pointing it at the movie screen. I want to burn just the video to a DVD SILENTLY so the clicking of the projector cannot be heard on the DVD. Can this be done with MEP
• Movie Studio

  3 answers, most recent on 10/4/2011

  Changing video to landscape from portrait?
  I made a mistake and took a video with my Bloggie in portrait mode instead of landscape. I usually use my Panasonic camcorder but didn't on this occasion :( Anyway, can anyone help/explain if there is any way to change this to landscape in MEP 18
• Movie Studio

  4 answers, most recent on 10/1/2011

  RE: Fade issue
    Hi Graham You did not mention which version of Windows, and whether it is 32 or 64bit! Also which format HD video - mp4, AVCHD ?  1080i or 1080p? John Hi John, Thank you for getting back. I use 64bit Win
• Video Pro X

  2 answers, most recent on 9/26/2011

  active movie has different resolution as new file added
  When I insert some footage in a project, I get the following msg: "The active movie has a resolution of 29.97 fps The file "x" has a resolution of 30.00 fps If you wish to adjust teh movie and video monitor settings to the imported
• Movie Studio

  2 answers, most recent on 9/26/2011

  magix will not read my camcorder files
  hi i have just purchased magix movie edit 12, installed it on my pc and tried to load files from my smasung camcorder and all i get is a message saying magix can not read the file . the files are mp4 format can anyone tell me if am doing
• Movie Studio

  2 answers, most recent on 9/26/2011

  No Sound
  Every video I import, recorded by my camcorder, a Sony DCR SX-40, plays fine but has no sound.  How can I get the sound to play, how do I repair this?
• Movie Studio

  3 answers, most recent on 9/3/2011

  RE: My captured video is darker than what it shows on the camcorder screen
  Hi You have hit one of the problems that all 'photoshoppers' have - what you see on the computer screen is not what you see in print or TV. The only way is to do a test DVD, use rewriteables for testing - they save you money in the long run,
• Movie Studio

  3 answers, most recent on 9/3/2011

  My captured video is darker than what it shows on the camcorder screen
  Is it going to lighten up when I burn it to a DVD and show it on a TV or project it?
• Movie Studio

  5 answers, most recent on 8/24/2011

  RE: The active movie has a resolution of 720x490 (4:3), 29.97 fps. The File (File I'm editing) has a resolution of 1920x1080 (16:9), 59.96 fps
  hi all please help me i am using magic x moviepro 14 plus and i tryed to import video from my Sony HD CAMCORDER (DV 6799es) it is not possible but when i tried to import pictures from the same device it is getting (from my camcorders sd card
• Movie Studio

  3 answers, most recent on 8/19/2011

  My videos are not showing up properly in the preview area - audio and stills only - is this a setting or my computer?
  Hi I am using Magix Movie Edit Pro 17 Plus (download version) on a Windows 7 laptop (4gb ram, t6500 cpu 2.10Ghz).  I have some videos I have recorded on my basic Sony Camcorder (.mpgs), which I am wanting to put together with titles, effects,
• Off topic

  2 answers, most recent on 8/20/2011

  The sound and the image, by times are not synchronized, in simultaneous
  Hello, Magix Deluxe 17 The sound and the image, by times are not synchronized, in simultaneous. This problem is aggravated when I divide the scenes and I eliminate a part, where the sound is not in accordance with the image. e I have
• Other products

  One answer, on 8/22/2011

  importing video, camcorder connected but no video on playback screen
  Importing from Canon Vixia HV40 via firewire to Magix pro 17, camera is connected, plays fwd/back etc.via computer,  but no video/pic on playback screen?  Computer is operating with Windows 7.  All works well on Windows XP, & internet forums
• Movie Studio

  4 answers, most recent on 8/13/2011

  RE: Transfering video files or video shots
  I have down loaded video files from the sd card of the camcorder to an external drive of my computer.  How do I now load those video files into MAGIX Movie Edit pro either in the story board or on time line? What I would do is make sure
• Movie Studio

  4 answers, most recent on 8/13/2011

  Transfering video files or video shots
  I have down loaded video files from the sd card of the camcorder to an external drive of my computer.  How do I now load those video files into MAGIX Movie Edit pro either in the story board or on time line?
• Movie Studio

  One answer, on 8/10/2011

  RE: no visuals on imported mov file?
  A mov file can contain any number of codecs .  Download the free Media Info or GSpot to determine which codecs your file has to see if it is supported by MEP.  I use both since the give different info.  I think GSpot will tell you if the codec
• Video Easy

  3 answers, most recent on 5/24/2013

  Problems tranferring Hi8 to DVD
  Hi i'm using Video Easy and when i try to grab video from my old Hi8 camcorder it plays back as if shot in 'Fast play' mode. As in the movie plays speeded up., but not when i play it on the camcorder screen or on the TV Can you help me
• Movie Studio

  9 answers, most recent on 7/25/2017

  What settings do I use to save AVCHD output?
  Magix claims a 90% time savings when editing AVCHD files in MEP 17 Plus.  I would like to take advantage of that, especially since the vast majority of my video was captured in AVCHD.  What I don't know is, what settings do I use to take
• Movie Studio

  2 answers, most recent on 7/28/2011

  I have a Canon DC40 Camcorder with mini-cd recording medium. I record videos on the cd and then try to transfer soft ware my video by using my usb cord when I use my magix Edit Pro 17 it says there is no connection. Do I need more software to do this
  I have a  Canon DC40 Camcorder with mini-cd recording medium.  I record videos on the cd and then try to transfer soft ware my video by using my usb cord  when I use my magix Edit Pro 17 it says there is no connection.  Do I need  more software
• Movie Studio

  One answer, on 7/25/2011

  sound won't play from jvc movie file on movie edit pro 14
  I am trying to play video clips from my JVC camcorder (.mod/.mvd files) on my movie edit pro 14. I just activated the mpeg-2 codes, and the video does play but there is no sound. I thought I would try dragging the possible sound files
• Other products

  4 answers, most recent on 7/28/2011

  Export Different Formats Simultaneously-Convert SD60 MTS to MP4 for XOOM and MTS to AVI for Editing in Adobe Premiere Pro 2
  2011 Perfect Conversion Tool-Convert SD60 MTS to Multiple Video Formats Meanwhile Simultaneously Convert and Export Multiple HD Videos Formats for Motorola Xoom,Acer A500 and Adobe Premiere Pro 2 Transcode SD60 MTS to Multiple Video Formats
• Movie Studio

  One answer, on 7/10/2011

  Video mastered in Blue Ray does not convert smoothly in EditPro 15+ or 17+. Is there a conflict with interlacing?
  I have a problem creating smooth scene transitions, pans and tilts due to rough, jagged interlacing. Pans are jittery and made up of double images. Fast moving images are reduced to a single field. To it's credit, the Blue Ray resolution is