• Movie Studio

  5 answers, most recent on 10/13/2011

  RE: why do I get an error message every time I burn toa dvd?
  Hi. As I said before we are all users so, unfortunately, the error log is not easily understandable.  However, it appears to suggest that the actual DVD files are being successfully created (mention of .VOB file).  Has this/these been stored
• Movie Studio

  5 answers, most recent on 10/13/2011

  RE: why do I get an error message every time I burn toa dvd?
  Hi, Here is some of the information you asked for: My computer is an HPE-480t with intel's i7 930 CPU @ 280 GHz. 12.0 GB ram. 64 bit operating system. Here is a copy of the log that appears when i get the error. 10/11/2011 8:25:05
• Video Easy

  One answer, on 9/15/2011

  RE: I cannot burn a dvd. Encoding errors
  Years ago I gave up trying to burn my DVDs from MEP, as it failed so often. Usually at the very end, like your example. Occasional tests show no improvement in MEP17+. I suspect (it's just a guess based on glancing through the log above and
• Movie Studio

  2 answers, most recent on 9/10/2011

  RE: How do I import a movie from my DVD/CD? I have pro 17 and I have no problem importing from my c drive just my D drive
  Hi Use Wndows Explorer to browse the DVD select the files need - see my reply in this post and copy to your hard drive into your project folder.  Then in MEP drag the VOB or converted  VRO to the timeline and edit as required. John  
• Movie Studio

  6 answers, most recent on 9/8/2011

  RE: I transferred my vhs footage to a dvd and then I recorded my dvd footage into Magix Edit Pro 16. The issues I am having are my finished footage was not moving, I could not put my music in the background of the footage,n I cud not seperate ftg into scenes
  Hi Transferring from tape to DVD using a combi recorder was what I suspected.  It looks like from your initial post you are then recording twice - the second time from DVD into MEP. Once you have the DVD in the computer it is only
• Movie Studio

  19 answers, most recent on 9/7/2011

  RE: Unwanted cropping
  Hi What are the aspect ratio settings for the movie, the imported files and the DVD burn settings check these as shown in images below. For burn settings follow the numbers in order if 3 is not correct click 4 and change as necessary - if you
• Movie Studio

  One answer, on 8/25/2011

  error on burnig
  receiving vts_01_1.VOB
• Photostory

  One answer, on 8/22/2011

  RE: Endless Loop
  Here's a kluge that will work if you need an endless loop for a reception, reunion, etc.  (1) Build your slideshow DVD. (2) Use a program like VOB2MPGPRO to convert the chapters to MPEG files.  (3) Use a DVD maker like Vista Windows DVD Maker and
• Movie Studio

  One answer, on 7/17/2011

  Unable to burn video - getting empty ranges and kernelbase errors - Movie Maker 17 HD
  Everything is working fine until I try to burn the movie and I get a empty range error I ignore that and then I get a kernel error after that. here is what my error log is giving me. -------------------------- 07/01/2011 10:49:49 PM
• Movie Studio

  2 answers, most recent on 7/16/2011

  RE: One more wish list item for MEP 18
    I don't have/use MEP 17 Plus (my last version is 15 Plus, I now use Video Pro X) but I'm pretty sure all versions create a folder containing the .vob and .ts files in addition to creating the .iso image (which is actually only a .zip
• Movie Studio

  3 answers, most recent on 7/16/2011

  RE: burning with Magix movie edit pro 17
  the files are vob files, when i start to burn i get - VTS_01_1.vob should the existing file be used for the film sicily, they are just video files 
• Movie Studio

  2 answers, most recent on 7/16/2011

  RE: One more wish list item for MEP 18
  I don't have/use MEP 17 Plus (my last version is 15 Plus, I now use Video Pro X) but I'm pretty sure all versions create a folder containing the .vob and .ts files in addition to creating the .iso image (which is actually only a .zip file
• Movie Studio

  One answer, on 7/14/2011

  RE: Loaded Movie Edit Pro 17 Plus on new Windows 7 OEM. It won't except .MOV or .VOB Vidio, It will except .JPG. Computer is 64 Bit.
  You may need to register the encoders under the drop down menu help. Magix only makes the software, not the encoders so each need to be registered independently with their manufacture. VOB will probably need the MPEG-2 MOV could need the
• Movie Studio

  2 answers, most recent on 7/13/2011

  RE: video _ts file
  From my experience VIDEO_TS is a folder not a file. You want to import the .vob files into MEP. You can bring more than one and attach them to one timeline. I just finished a projected where I had a few corrupted .vob files that I could not
• Movie Studio

  One answer, on 7/14/2011

  My film clips wont burn
  Hi please help - Im trying to burn a short 8 min dvd. Everytime I try I get the following message. Internal error. I've tried two different dvd burners and get the same outcome on both. Here is a log of the
• Movie Studio

  One answer, on 7/14/2011

  Loaded Movie Edit Pro 17 Plus on new Windows 7 OEM. It won't except .MOV or .VOB Vidio, It will except .JPG. Computer is 64 Bit.
  I installed Edit Pro 17 Plus on new computer W/Windows 7 OEM. It won't except .MOV or .VOB Video, It will except .JPG.       Computer is 64 Bit.
• Movie Studio

  2 answers, most recent on 7/13/2011

  RE: video _ts file
  Hi If I read your problem correctly then you need to load only the .vob files into MEP.  The VOB files are the movie files, and there may be more than one, the BUP and IFO files are data files about the movie and do not contain any
• Movie Studio

  3 answers, most recent on 7/14/2011

  RE: why won't .vob files import corectly into Movie Edit Pro 14?
    There could be a number of things going on. What created the DVD, was it store bought or burned from a different program? Is the DVD in a NTSC or PAL format I am assuming NTSC if your are in the Americas, but asking just the
• Movie Studio

  3 answers, most recent on 7/14/2011

  RE: why won't .vob files import corectly into Movie Edit Pro 14?
  There could be a number of things going on. What created the DVD, was it store bought or burned from a different program? Is the DVD in a NTSC or PAL format I am assuming NTSC if your are in the Americas, but asking just the same. Is
• Movie Studio

  3 answers, most recent on 7/14/2011

  why won't .vob files import corectly into Movie Edit Pro 14?
  I am trying to bring video from a DVD into MEP 14Plus so that I can clean up the audio. After importing the 4 .VOB files found in the folder that is on the DVD I find that the last three dont play back correctly. The audio cuts out about 1 minute
• Movie Studio

  2 answers, most recent on 6/23/2011

  RE: How can I save an iso dvd image to an external HDD as a backup in MEP 16?
  Maybe I've misunderstood? "I would like to backup some iso disc images..." So do you already have these as .ISO files? If so why can't you just copy them with Explorer in the usual way? If not, and they are still DVD folders (containing IFO, BUP
• Movie Studio

  9 answers, most recent on 6/27/2011

  RE: Why don't most of the transitions work properly
  OK, so the MPEG file export is fine, that means that the MPEG encoding only fails when burning to DVD, strange... In order to make your DVD now, you need to start a whole new project and import the MPEG file you exported earlier into that new
• Video Easy

  3 answers, most recent on 6/10/2011

  RE: No sound when videos imported
  Vob's what you need. Try playing the VOB file in Windows Media Player, to see if the sound is ok/accessible in the transferred file.  You would need a firewire lead to transfer from your camera directly into the program, but if the VOB file plays
• Video Easy

  3 answers, most recent on 6/10/2011

  No sound when videos imported
  I'm trying to import videos created from a canon dvd camcorder DC230 into video easy in windows 7. They import ok but there is no sound. I've copied the files from the mini cd's to hardrive and the file types are *.Bop, *.Ifo & *.vob. What do