• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  Below shows the peaks after normalizing to full level in SFACL: Integrated level is now -19.2 LUFS, TP = 0.0 dB. The warning level was set to -1.0 dB so I can now locate the peaks and fix them if I want to get the higher overall level. Below shows
• Video Pro X

  9 answers, most recent on 4/16/2020

  VPX Setting, Adjusting and Analyzing Loudness - Plugins
  Discussion on Adjusting and Checking Loudness in VPX11 The Peak Meter in the Mixer of VPX is difficult to work with for any accuracy; there is no indication of actual levels other than the blinking or steady lights. Finding peaks and knowing the
• Movie Studio

  9 answers, most recent on 2/18/2020

  RE: Full screen mask size
  @1940 Hi . . . can I do it without the cuts? . . . Yes - see image below Using only the Size and Position effect the keyframes, counting from left to right are set and do the following: Quick zoom lock starting size of clip lock size and position
• Video Pro X

  8 answers, most recent on 2/17/2020

  RE: Is there a "tiles effect" for clips?
  @phonebooth Hi, MEP/VPX don't have a tiling feature. However, there are a couple of ways to get tiling without too much effort. After that, then you can modify and/or create your own and save it as a collage. I noted that the examples that you
• Video Pro X

  22 answers, most recent on 1/15/2020

  RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting
  @johnebaker Hi John, For the new Color Space settings of Project Settings/Movie Settings, Magix indicates, "You can now select HDR, Full HD/UHD or SD as color space for your project in Video Pro X. New options for color space within the program
• Photostory

  6 answers, most recent on 12/18/2019

  RE: Pan and zoom for beginners
  Success! John, thank you so much for the link to the tutorial for Movie Edit Pro. I did not understand the function of the Preview button. Once I watched the video, it was clear how to use the preview button to lock in the selection. I went back and
• Photostory

  6 answers, most recent on 12/18/2019

  RE: Pan and zoom for beginners
  @Larry-Reid Hi Larry, Read through this about Camera/zoom shot effect. My comment about "It isn't the program, it's you" pertains to someone who spent hours and wasn't able to do a simple project with some photos and titles. What you want to do is
• Video Pro X

  116 answers, most recent on 12/12/2019

  RE: VPX11 Patch 17.0.3.55
  @gmlotkow Like John EB, I don't see any blurring in a video clip if I add a zoom in, hold, zoom out. EDIT: No blurring when zoomed in and then panning left or right. As well, I have no problem previewing the first frame of a video clip when dragging
• Movie Studio

  31 answers, most recent on 11/24/2019

  RE: Can't Move Objects freely - they keep snapping to points
  @Skyline_UK Hi, Did you do any of the things that I suggested? If you are trying to align your clips using the visual cues in the video, you will most like not succeed. Align the visible transients of the audio clips with the visible transients of
• Movie Studio

  31 answers, most recent on 11/24/2019

  RE: Can't Move Objects freely - they keep snapping to points
  Yes, I can do that. But when you zoom in the movement is still only in whole frames. Here's another video from a later take and I've left the sticks count in audible. You can clearly hear a flamming effect as the video and its sound is running a
• Movie Studio

  31 answers, most recent on 11/24/2019

  RE: Can't Move Objects freely - they keep snapping to points
  @Skyline_UK "...they're so far apart it's cl-click and apparently can't be manually placed accurately. " So far apart? No, they cannot be more than half a frame - that is imperceptible. I think that you are doing something wrong. If the beginning of
• Movie Studio

  28 answers, most recent on 10/24/2019

  RE: MEP 2020 TK2 Bug
  @browj2 @johnebaker Thanks for the feedback. Maybe Speed > Interpolate only works well with Interlaced video. I used interlaced DV AVI footage way back in MEP2004 and thought that I was able to slow it down smoothly to very low speeds and I don't
• Movie Studio

  28 answers, most recent on 10/24/2019

  RE: MEP 2020 TK2 Bug
  @Richard-Curtis, @browj2, @Scenestealer Hi As I see it the issue with interpolated frames and stabilisation is a result of how the 2 effects are working/applied with the source video. This is what I suspect is happening: Stabilization parameters
• Photostory

  4 answers, most recent on 10/21/2019

  RE: Photostory Delux 2019 Tutorials for Newbies
  @Chrisvd @Norman-Peterson Hi, Did you watch the tutorials on the Magix site? https://www.magix.com/ca/support/know-how/tutorial-videos/photostory-deluxe/ In the manual, there is a Quick Start chapter that you should read and try out everything using
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  Exporting is becoming more or a dark art than I first suspected. Using the standard MPEG-4 codec in MEP and and using software encoding only I tried a different project that was five minutes 43 seconds and forty one frames at 50fps. Consisting of a
• Photostory

  2 answers, most recent on 9/24/2019

  RE: Landscape V Portrait
  Hi, Thank you so much for your reply. As you suggest, as a novice, I'm going to spend some time to read up on this subject in the manual when time permits. In the meantime, it's nice to know that the possibility is there. Thank you again for your
• Video Pro X

  6 answers, most recent on 9/24/2019

  RE: Travel Maps Problems - Turning off and on, Multiple photos, others
  Here are a couple of additional problems that one user mentioned. I did some testing and added to it. All points have been added to the VPX11 bug list. l. Load a map/Save Zoom incorrect – load a map, create route, zoom in on the map, save the
• Photostory

  2 answers, most recent on 9/24/2019

  RE: Landscape V Portrait
  Hi, I don't have 2013 anymore, but I have the 2019 version. This should be approximately the same. Make sure that you are in timeline mode, not Storyboard. Click on the photo. Click on the Effects tab, There you should see View & Animation and
• Movie Studio

  5 answers, most recent on 9/19/2019

  RE: Fonts are blurry
  @konjurer Hi Assuming you mean in the preview monitor, it looks like you may have the Reduce resolution setting for the preview monitor turned on - blue lightning flash bottom right of the preview monitor, in which case some fonts will look blurred
• Video Pro X

  8 answers, most recent on 9/14/2019

  RE: Pan across view on back-to-back frames not working
  Hi Jason, It would actually be easier if you use the original cut version. I don't know why you are using Camera/Zoom shot, especially over full duration when your video is not cut up. I would just use Size/Position and create keyframes where
• Video Pro X

  8 answers, most recent on 9/14/2019

  RE: Pan across view on back-to-back frames not working
  This is the version I'm using: Here are a couple screen-grabs of what I'm doing... These are two back-to-back frames of the play going across the middle from left to right. As you can see, I've zoomed into the relevant portion of the frame. Then
• Video Pro X

  8 answers, most recent on 9/14/2019

  RE: Pan across view on back-to-back frames not working
  @Jason-Rogers Hi . . . . I need to move the frame from one side of the screen to the other on back-to-back frames keeping the current level of zoom. I do this by placing a keyframe on one frame, advance to the next frame, and drag the zoom over to
• Video Pro X

  8 answers, most recent on 9/14/2019

  RE: Pan across view on back-to-back frames not working
  My problem is when the play goes across the middle. I need to move the frame from one side of the screen to the other on back-to-back frames keeping the current level of zoom. I do this by placing a keyframe on one frame, advance to the next frame,
• Movie Studio

  22 answers, most recent on 8/21/2019

  RE: Animated straight line between any two points
  Hi John, Hopefully your German language skill plus Walter’s tutorial will help! I’ll also get on the case in the morning if you haven’t found the solution by then. Meanwhile here are the steps I used: ANIMATING A TRACK IN MEP 2016 USING ECHO