• Movie Studio

  8 answers, most recent on 11/24/2012

  How can I synchronize audio to video?
  When I click on Load available video files/Import file from the Record screen, I see my hlr200 file under the Magix MEP16 heading. When I run the cursor over it, the 10-minute video plays perfectly - perfectly synchronized. But after opening it in
• Movie Studio

  7 answers, most recent on 11/20/2012

  RE: How do I delete an old title and replace it with a new one?
  George, I followed your instructions after downloading the MPEG-4 codec. The 10-minute movie still gets noticeably out of sync at about the 5-minute point. At 8 minutes it's completely out of sync. I'd like to get on with this project: Placing a
• Movie Studio

  7 answers, most recent on 11/20/2012

  RE: How do I delete an old title and replace it with a new one?
  George, I'm going to follow the steps in your post. Will I have to activate the MPEG-4 Codec? When I play the ten-minute video on Windows Media Player it looks good, all in sync. I just made 12 copies of it using Nero. I also just played the
• Movie Studio

  7 answers, most recent on 11/20/2012

  RE: How do I delete an old title and replace it with a new one?
  terripin, before I read your instructions I found out on my own, through experimentation and the manual, how to solve the title problem. I tried many of the title presets but then just created a generic title using the Title Editor. My work looked
• Movie Studio

  25 answers, most recent on 11/20/2012

  RE: MEP 2013 Preloading - slow? ineffective?
  Hi Peter, Many thanks for that most helpful post. And for sticking with me on this and some of the quirks I'm seeing in 2013 in particular! I've just changed my settings in the Video/Audio tab to try out a couple of your suggestions. Here's
• Movie Studio

  One answer, on 11/4/2012

  RE: video and audio not syncing up
  Two quick comments: A search for 'sync' will give lots of earlier topics which you may find useful. Please add some detail of you situation which is really necessary for any here to give you an answer. eg Source of your audio / video? What
• Samplitude

  3 answers, most recent on 11/5/2012

  RE: What is the difference between Samplitude Producer 11.5 and the new Samplitude Music Studio 2013?
  The trial version really threw me for a loop. I've spent some serious $$$ and still have a fraction of the functionality the demo had. Don't be fooled!!! The Sam demo that I got was the full-blown version... I popped $60 for that as I thought it
• Music Maker

  5 answers, most recent on 9/4/2012

  RE: how can I move a track back a split second?
  @procyon and @nihon, What you both are saying is absolutely correct if the project was totally created in MM, because if both the music and the vocals were created in MM they will both adhere to the 6 milisecond minimum which is the smallest
• Movie Studio

  2 answers, most recent on 8/17/2012

  RE: Audio Offset inconsistencies
  Which version of MEP?  (Details of your computer etc. would also be helpful!) However, I assume from your message that the audio/video sync is lost at some point when playing your video file after burning to DVD.  Does this loss of sync also
• Other products

  5 answers, most recent on 8/17/2012

  RE: How can I syncronise sound with the video
  Hi, Thank you for the clarification.  If you hook your camera up directly to a television and play back the recording, is the audio for the speech in sync? By the way is it a digital video camera or are you working with analog tape like VHS,
• Video Pro X

  One answer, on 8/8/2012

  Video Pro X4/X3: Program interface will not load properly: keep losing Xara title fx
  I have a problem with my Video Pro X4 program: when I open it, the program interface has no monitors, media pool or fx tab.  Its only the timeline which takes up the whole screen.  I've re-set the program to no avail.  I deleted the program and
• Other products

  3 answers, most recent on 7/26/2012

  RE: My audio is out of sync with my video how can I edit my audio track?
  Hi, 30 seconds of out of sync audio sounds to me like there is something very wrong with your video capture device, or your computer simply cannot handle the transfer due to memory, CPU speed, disc access or some such problem.  Most video editors
• Music Maker

  One answer, on 5/18/2012

  RE: I have recorded Acoustic guitar fine but when i try to record vocals there is an uneven delay on the playback after recording the vocals.. Can anyone advise why this might be..
  Hi Latency delays are a major problem when trying to sync vocals to audio in a ' live' situation ie when the computer is playing back the audio track previously recorded as you try to record vocals on another track. A lot depends on how your
• Other products

  3 answers, most recent on 5/5/2012

  RE: video conversion issue
  ssh1cd, Bit confused as your question seems to be about a problem with Adobe, not Magix. In Magix Movie Edit Pro and I'd assume its 3D Maker program as well, it is possible to un-group the audio from the video and slight stretch one out to
• Movie Studio

  4 answers, most recent on 5/4/2012

  RE: chroma key slow
  ronhoag, Are you finding sync problems during previews on the timeline? I've never had any problem with chroma effects but often find complex transition are not smooth. I'd suggest exporting only a small section including your chroma key and
• Movie Studio

  2 answers, most recent on 4/29/2012

  Sound out of sync of burn or export
  I have finally finished editing my movie.  The lips are in sync with the words on the edited version in the workspace.  But when I burn it to DVD or export it by the end of the 30 minute movie the lips are off by a few seconeds. Any suggestions
• Movie Studio

  5 answers, most recent on 4/13/2012

  RE: problem with sound not exactly matching image
    Hi Should have asked earlier which version of MEP are you using and is it updated to the latest patch? There were problems with sound sync with NTSC material in MEP16 and 17 which were corrected. Are you recording at 30 fps and
• Movie Studio

  5 answers, most recent on 4/13/2012

  RE: problem with sound not exactly matching image
  Hi Should have asked earlier which version of MEP are you using and is it updated to the latest patch? There were problems with sound sync with NTSC material in MEP16 and 17 which were corrected. Are you recording at 30 fps and the project
• Movie Studio

  One answer, on 3/2/2012

  RE: sound not synchronised?
  is the sound out of sync when you preview the video inside the video project too? That is the problem I have too. It's a very tiny offset but it is a problem when lips do not match sound!! I don't have any solution but you are not alone with
• Movie Studio

  2 answers, most recent on 2/16/2012

  RE: How do I correct sound problems that occur during the burning phase?
  It is, I think "theoretically" impossible for problems of this nature to appear only at the burning stage. So, I presume you checked the movie by playing the WHOLE thing, non-stop, and it played perfectly, no audio/video sync issues?  Notice,
• Movie Studio

  One answer, on 2/10/2012

  Exporting Movies
  When I finish editing my videos. I export them as MPEG or other formats and there is ALWAYS glitches. Either the audio gets out of sync or the finished video gets jumpy and has glitches everywhere or all my crossfades bog down and also get jumpy
• Movie Studio

  6 answers, most recent on 12/30/2012

  Video playback is choppy
  I am using Magix Movie Edit Pro 16 HD and have never been able to use this SW to produce anything worth looking at.  I admit, I'm a novice but a friend of mine bought a Mac recently and within days was producing great videos from our ski footage,
• Movie Studio

  10 answers, most recent on 12/6/2011

  RE: Scambled import
  Hi Peter, Just tried that zip in both 17 and MX and both play very smoothly with 10 - 20% CPU usage even with colour correction and at full resolution. Crossfade very smooth and 3D page peel smooth with 17 and a little sticky with MX. This is
• Movie Studio

  10 answers, most recent on 12/6/2011

  RE: Scambled import
  Just tried that zip in both 17 and MX and both play very smoothly with 10 - 20% CPU usage even with colour correction and at full resolution. Crossfade very smooth and 3D page peel smooth with 17 and a little sticky with MX. This is with one clip