• Movie Studio

  12 answers, most recent on 9/22/2021

  RE: VOLUME CURVE IN MEP
  @VideoPro So the white line becomes the "ceiling" right? Green lines going above that line will not have any impact? The 'ceiling' is when you run out of bit bits in the bit depth selection of the audio recording which is always represented as 0db
• Samplitude

  2 answers, most recent on 9/21/2021

  RE: Scratching sound in Samplitude X5 Pro
  @Jesnie Yes, if you go above 0 db you get clipping. This means the peaks of your audio signal get chopped of which causes this unpleasent sound. You can put a limiter effect on your master, for example the essentialFX Limiter and this will prevent
• Samplitude

  2 answers, most recent on 9/21/2021

  Scratching sound in Samplitude X5 Pro
  Hi there... Again :) I have tiny problem during playback, and export.When some of my instruments is playing at a high volume, it makes a scracthing sound, like there is a feedback, or simulating a loudspeaker that cant handle the volume. I have
• SOUND FORGE

  5 answers, most recent on 9/22/2021

  RE: Website Malfunction
  No, it was because the website was malfunctioning so it tried to charge my card multiple times so my bank froze my debit card because its worried that I'm being hacked or defrauded, which is unfortunate because I'm trying to run my business. My
• Music Maker

  One answer, on 9/20/2021

  Gradually change tempo
  I would like to make songs that change tempo(bpm) mid song is there any was to do this? So far I only know how to change the BPM of the entire arrangement. Is there a master track for setting tempo?
• ACID

  3 answers, most recent on 9/19/2021

  RE: morph pads
  Yeah, this is if you've removed morph pads plugin from the master bus or a channel, but not from everywhere. Remove it from everywhere. If you're never using MorphPads you can turn the option off to enabled by default so your solution is to turn
• Movie Studio

  One answer, on 3/22/2022

  Menu encoding error
  Has anyone noticed an error pop-up message aborting the process when encoding the menus for mastering an AVCHD or blu ray disc? The DVD menu encoding is okay. This prevents the process from burning to disc.
• Movie Studio

  23 answers, most recent on 9/16/2021

  RE: Sound and volume problems
  @Arkadiusz-Marzec Hi. Personally I don't think it is a bug as I can't replicate the problem. I played four copies of the same file in sync and apart from having to reduce the gain of each channel by -12db to compensate for the additional volume of
• Movie Studio

  23 answers, most recent on 9/16/2021

  RE: Sound and volume problems
  @Arkadiusz-Marzec Hi. Personally I don't think it is a bug as I can't replicate the problem. I played four copies of the same file in sync and apart from having to reduce the gain of each channel by -12db to compensate for the additional volume of
• Audio Cleaning Lab

  3 answers, most recent on 9/15/2021

  RE: aclab 2005
  @Ray-Davis The current version of ACL is called Sound Forge Audio Cleaning Lab 3 https://www.magix.com/int/music/sound-forge/sound-forge-audio-cleaning-lab/ The full version comes with the elements version of iZotope RX and Ozone which are used for
• SOUND FORGE

  22 answers, most recent on 9/10/2021

  RE: Error message: "There is no template available for this format.
  Sure thing. I saved a file as a .wav with 22,500 and 24 bit. I finished mastering and then went to export it as an MP3. That's when I hit the issue.
• Music Maker

  2 answers, most recent on 9/6/2021

  RE: Bad sound after saving.
  Also @Bthanse you have to beaware that there are always going to be some sort of mastering to be needed some where on the timeline. Go back to the project and open it and find the track that has the bass you are mentioning and see if you can work
• ACID

  4 answers, most recent on 9/7/2021

  RE: Morph Pad Usage
  Thank you Sheppo for that info...a few questions: I tried my method above and still doesn't work for me...is there something I'm missing. When I add automation for the morph pad (to the master track) how do I know what checkboxes to select? There
• ACID

  4 answers, most recent on 9/7/2021

  RE: Morph Pad Usage
  In its current iteration automation can only be saved to the master bus, not individual tracks.
• ACID

  3 answers, most recent on 9/19/2021

  RE: morph pads
  Yeah, this is if you've removed morph pads plugin from the master bus or a channel, but not from everywhere. Remove it from everywhere. If you're never using MorphPads you can turn the option off to enabled by default
• Video Pro X

  122 answers, most recent on 11/21/2021

  RE: Proposed new computer specs for using VPX
  @AAProds @johnebaker @CubeAce My previous build I installed a Cooler Master MasterLiquid ML240L V2 RGB CPU Liquid Cooler, top mounted. I had no issues, it bubbled up on Pc boot up, but was quiet when generally running. Stephen  
• Samplitude

  10 answers, most recent on 9/3/2021

  RE: Export - No Active Master in the project or routed to it
  I've tried this number but different times never works "1 775 562 0528" It never allows me to call, past in year a while back, and not now early or late. I know the area, just not getting anything done for the master area. Not sure what but I'm
• Samplitude

  10 answers, most recent on 9/3/2021

  RE: Export - No Active Master in the project or routed to it
  Let me try the issue again. - I'm guessing that the "master" for allowing to be active is the issue. project or routed. It only happens when I go to export it on wav or mp3 (or whatever else probably, though these two are what I'm trying to connect
• Samplitude

  10 answers, most recent on 9/3/2021

  RE: Export - No Active Master in the project or routed to it
  @Jim-Drew Here is a screenshot. Please check in your mixer (you can open it by pressing M on your keyboard) if an output for your master channel is selected. There is a telephone support for Samplitude Pro X
• Samplitude

  10 answers, most recent on 9/3/2021

  RE: Export - No Active Master in the project or routed to it
  Let me try the issue again. - I'm guessing that the "master" for allowing to be active is the issue. project or routed. It only happens when I go to export it on wav or mp3 (or whatever else probably, though these two are what I'm trying to connect
• Samplitude

  10 answers, most recent on 9/3/2021

  RE: Export - No Active Master in the project or routed to it
  @Jim-Drew Can you make a screenshot of your mixer and routing tab? There you can see the master channel and which tracks are sending their audio output to it.
• Samplitude

  10 answers, most recent on 9/3/2021

  Export - No Active Master in the project or routed to it
  I try to Export I get a message that there is "no active master in the project or rout to it" I ran into this before but I'm dealing with my head of Stroke so my head gets messed up. I had this working a while. Just had an update and the issue is
• MAGIX

  No answers, created on 9/3/2021

  SOUND FORGE turns 30!
  Dear community,  SOUND FORGE turns 30 – celebrate with us!  As the first choice for producers and sound engineers worldwide SOUND FORGE has a huge impact on the way professional recording, editing and mastering has been done for 30 years.    To
• Audio Cleaning Lab

  2 answers, most recent on 8/17/2021

  Does the latest version of Audio Cleaning Lab run on Windows 7?
  Dear friends, Does the latest version of Audio Cleaning Lab run on Windows 7? If not, what is the most-recent version of Audio Cleaning Lab that does, and where can I get it? Doug / Bird-On-Fire Recording & Mastering