Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

@me_again Well Mike, look at what you've started 😁😂 Brain fail at last! I'm going to bed! 35°C during the day, dropping to 18°C tonight. At last I can sleep with a light blanket (and overhead fan on full). JohnCB, where do you live again, I'm coming

Music Maker

4 answers, most recent on 7/7/2023

Panning not working

I will need to go back to scratch to work out why, in the past up to a couple of months or so ago all of my recorded vocals were properly centred in the mix, but recently something changed, and now all the vocals are on the left side, left channel,

Video Pro X

38 answers, most recent on 9/7/2023

RE: H264 Export Frame Rate of 16.67 Possible?

@AAProds Hi Al, ...it's Super 8 being shot with a camcorder off a screen. This is the second worst method, the worst being off a wall. I have two different video transfer kits. So one up from project on a screen is something like this: Mine is

Music Maker

9 answers, most recent on 4/6/2023

RE: Objects not recording,reverts back to free version, Asio issues

Magix crashed again today, right after I chose Magix Asio driver, I could hear good sound through the headphones, but no waveform was produced during the recording and then it crashed. I've been having issues with low sound levels using magix, which

Movie Studio

70 answers, most recent on 2/7/2023

RE: How to access NewBlue FX in MS suite?

"I have never not? [Edit, always 🤣]{" chnnchhcnh. Luvvit. I will try to stay up until 01:00 tonight and do the download. My Satellite Web is severely limited in data limit and it's only "after midnight" that I get to download GB. Nick

Audio Cleaning Lab

2 answers, most recent on 11/21/2022

Error message:Audio Cleaning Lab needs a correctly installed soundcard

Hi I'm using Audio cleaning lab 4 (64bit) and have been for ages with no problems. I turned on my PC tonight and I'm getting this error message about needing a correctly installed soundcard. I'm using a basic ASUS all in one computer which has been

ACID

4 answers, most recent on 11/10/2022

HORRIBLE

This is the absolute worst software ever and ranks even worse in user friendly department an absolute waste of money if best buy doesn't alllow my return im going to flip out cause it will literally be a $35 starter log for tonights fire. Hopefully

Movie Studio

5 answers, most recent on 1/20/2023

Movie Studio 2022 View preview stopped working

Hey folks, I've been happily using Movie Studio 2022 for a while now, but today I opened the laptop tonight and one of the files I had been working on seems to be unable to play video previews. Granted there are a mix of different frame rate videos

Music Maker

12 answers, most recent on 1/14/2023

RE: Proper sample rate for exporting as WAV?

Hi SP I've spent the last 4 days working on a track. I can't export it to either WAV or MP3. Now, when I attempt, it just crashes. Regarding looping: Yes, I knew about the "hidden" bit, but it doesn't work. I'm having so many issues with this

SOUND FORGE

23 answers, most recent on 10/15/2022

RE: I cannot update Sound Forge Audio Studio 15 or 16, or Music Maker 2023

Thanks for your prompt response SP. I am not using a laptop, these problms are on my main PC. Tonight I have found that the new Acid Pro 11 Suite that I bought just a few days ago, has the same blank area when trying to update it. I've updated my

Music Maker

7 answers, most recent on 11/19/2022

Audio recording through guitar amplifier is not working.

In version 31.0.1.13 when I hook up my guitar amplifier for an audio recording there is a loud machine gun firing sound. This happened yesterday when I installed this version. I reverted back to the most recent version 30 which I have in my download

ACID

11 answers, most recent on 4/21/2023

RE: 0db master level? Boosting?

Okay thanks @sheppo that really helped. I like the idea of a 'mastering bundle.' It's a bit more than I want to spend right here and now but at some point I'll probably buy that. But at this point I mainly just need a limiter / compressor system. I

Music Maker

6 answers, most recent on 1/6/2023

RE: Beatbox was working via Scarlett 8i88 Aud.Int, now not wroking at all

Hi Emmrecs Sorry for the late reply. New Years, Family stuff etc.... That was the fix. Apparently the drivers hadn't been properly installed, so I did them again via the link, now it shows up, and I can record a lot easier, however, there is still a

Video Pro X

148 answers, most recent on 4/18/2023

RE: General discussion on add-ons

@ericlnz Hi Eric, Thanks for that, I'll take a look in Vegas 18. I figured that there had to be some way to find out the gain. For keyframing, take a look at my tutorial on keyframing and you'll see something similar with the keyframe editor,

Video Pro X

26 answers, most recent on 7/26/2022

RE: VPX vs Vegas

@Former user Thanks Gid. I never would have guessed. For that price, I'll keep measuring and fixing my saw guide with clamps. I'll sleep well tonight having learned something new. John CB

Movie Studio

26 answers, most recent on 8/20/2022

RE: Sound Mixing problems

@CubeAce Hi Ray, I have not had that many tracks with audio. I tried a test with 3 and have object and track level audio. It would be helpful if you could demonstrate the problems one at time so that we can try to do the same thing. I am not getting

Movie Studio

11 answers, most recent on 8/4/2022

RE: an error occurred during proxy rendering

@johnebaker @Jacek-Leniowski It does if you open this dialog (Alt + R) Not the way I read it. Fair enough you can change the Proxy file type (if you have read the manual, I need a sleeping pill tonight! 😴) but the suggestion "try to export the file

Movie Studio

11 answers, most recent on 8/4/2022

RE: an error occurred during proxy rendering

@AAProds Hi . . . . the suggestion "try to export the file with a different setting" makes no sense because at this point, you're just trying to get proxy files onto the timeline . . . . Technically (that word again) the program is reading the

Video Pro X

7 answers, most recent on 7/17/2022

RE: PACKAGE CONTINUALLY CRASHES

Hi JohnMany thanks for this, it is appreciatedI think I have solved the issue from a comment earlier, but need to finish off this commission tonight, so will keep under review and advise either way on MondayThanks againPhil

Music Maker

6 answers, most recent on 1/6/2023

RE: Beatbox was working via Scarlett 8i88 Aud.Int, now not wroking at all

Hi, thanks for your responses. Unfortunately, no solution. Let me address the replies: 1. SP: There is no "Focusrite ASIO" option. In the top tool bar, next to the little house icon, there is a cog. I click on that cog and it takes me to the

SOUND FORGE

12 answers, most recent on 7/22/2022

RE: INSTALLING NEW & OLD VERSION

Hi, RRaud, Great speaking with you! You "get it." I was originally a Sony customer with some earlier versions of Sound Forge and I also go back to a couple of earlier versions of Magix Audio Cleaning Lab, but, I really found that Izotope Mastering

SOUND FORGE

5 answers, most recent on 7/12/2022

[Closed] Sound Forge Studio 15

I have 5 different Sound Forge products, but I will never buy another SoundForge product ever as long as you keep nagging me to upgrade every time I open my SoundForge program, etc. I don't care if it has exciting new options. I am enraged every

Rescue Your Videotapes!

13 answers, most recent on 5/22/2022

RE: Recording analogue video

@cmclernon Got that. I think I'll be having nightmares tonight! 🙂 The first thing of note is the wobbly right edge. This is a classic characteristic of VHS. It's fixed by using a line TBC, either in the VCR itself, or an external TBC. Those wobbles

Photostory

12 answers, most recent on 11/1/2022

RE: Latest Photostory Deluxe 2022 very slow

Hi John. I changed to the Intel card but it made no difference. 1. When I clicked on the 'x' in the picture to remove the text box, the program froze for 1:52.50 and the text remained, however I was able to removed the text box in Timeline