• Music Maker

  3 answers, most recent on 3/28/2014

  RE: MMP 2014 is unstable
  Some of the issues you are experiencing seem to come up on a regular basis.  However, we almost never get the full story from the poster, so we never really get a complete picture. Your computer seems to be "adequate" at best.  The big question
• Movie Studio

  3 answers, most recent on 3/20/2014

  RE: Movie Edit Pro 2014 hangs (freezes) while editing
  Terry: Appreciate your answer. I was hoping you would be the one to look at this as I see you have a lot of expereince over the years helping others. As has been the case in my few postings over the years, after months of troubleshooting, when
• Movie Studio

  3 answers, most recent on 3/20/2014

  Movie Edit Pro 2014 hangs (freezes) while editing
  I have been fighting an issue (or several) since buying the MEP 2014 Plus  program a few months ago. A long time user of MEP for about a decade, I moved from MEP16 (which ran great), to 2014 since I now use AVCHD MTS. I have begun using the proxy
• Movie Studio

  3 answers, most recent on 3/13/2014

  RE: Finished 3D movie edited in MEP 2013 Plus
  It took almost 24 hours for the YT file to upload and process, and I had to do it twice. My first attempt was with an mpeg4 file I had encoded from the master file, and when I played it back on YT, some of the sound was missing. Turns out one of
• Movie Studio

  8 answers, most recent on 3/11/2017

  RE: I am editing a video that i need to blur out two faces in the same clips
  You will need to have the same video in Tracks 1 and 4 to create the effect. However, before superposing them, just start with the video on track 1. Click on track 1, go to Effects, Video effects, Sharpness and apply Blur to the video. Then add
• Movie Studio

  2 answers, most recent on 2/16/2014

  RE: How do i get rid of a loud humm on a home video that I downloaded?
  Hi, The best way is to remake the sound track. 1) Use a word processor to type your narration, you play the original video and type text, polish the text and pratice few time to obtain a good result, when ready. 2) Use a headset micro and
• Movie Studio

  26 answers, most recent on 3/15/2014

  RE: Pixelan plug-ins for Movie Edit Pro 2013 or later are now available
  Gentlemen, I purchase the whole kit and have been learning how to use everything. I am puzzled by the problem that was mentioned of not being able to cancel the effect by clicking on the red X at the bottom of the effect dialog box or the red x
• Movie Studio

  35 answers, most recent on 2/24/2014

  RE: Vasco da Gama - Travel Route Animation - example & questions
  Hi Terry, You are right, this gets long, but interesting. Q: Was v5 a bundled promotion of some sort? A: I looked back at the invoices and I received VdG5 as part of a special deal for  PhotoStory2013 with which I also which I got Photo
• Movie Studio

  35 answers, most recent on 2/24/2014

  RE: Vasco da Gama - Travel Route Animation - example & questions
  Hi John, A very interesting topic for me, assuming we broaden it a bit, and I suspect it could get quite long! I received Vasco da Gama 5 (VdG) with one of the earlier versions of MEP and have since upgraded to version 8. This is an
• Music Maker

  2 answers, most recent on 1/16/2014

  magix premium 2014 playback distortion
  I have posted similar question before but this a newer version of magix, i'm running windows 7, intel dual core 3ghz cpu,4gb ram 500gb hard drive ( only just installed windows on it so apart from updates and magix software there is nothing else on
• Movie Studio

  12 answers, most recent on 1/10/2014

  RE: Exasperating that volume curve cannot be dragged!
  Hi Terry, I think that this is what you are looking for. Use the volume keyframes. Select the audio track, go to Effects, Audio effects, General, and click on volume if it is not already selected, and you will see the kf's. Just grab them and
• Movie Studio

  12 answers, most recent on 1/10/2014

  RE: Exasperating that volume curve cannot be dragged!
  Hi Terry This old thing again! Let's get the terminology correct - you are referring to Track Curves not Volume curves. You can move the nodes along the timeline independently or as groups by using (Shift) Left click (nodes turn purple) and
• Video Pro X

  7 answers, most recent on 11/22/2013

  RE: Place keyframes and curves direct on timeline?
  Hi . . . .What I ended up doing was to put the main camera on track one and put the other for cutaways on three. I then found where I wanted to insert a part, and cut the section from track three and moved it up onto track two and used the end
• Video Pro X

  7 answers, most recent on 11/22/2013

  RE: Place keyframes and curves direct on timeline?
  Thanks very much John, Jeff and Carl - screenshots most appreciated. I think I may have gotten a bit confused as its been a while since I edited in VPX. As you say it is actually the same as it used to be. I thought that one could right click
• Movie Studio

  5 answers, most recent on 11/4/2013

  RE: Making your own Intros & Outros
  Hi Terry, I see no one has tackled this. I too want to make my own stock intros and outros, so I would like to see this thread continued. At the end, what I would like, is to be able to select my homemade intro from the menu as you did and
• Movie Studio

  11 answers, most recent on 1/8/2014

  RE: Inserting objects
  John, thanks for your reply. I'm still not quite with it and I think it's my fault for not making my problem clear because I was using the wrong terminology. It's probably because I'm calling an 'effect' an 'object'. My test film involves a yacht
• Movie Studio

  11 answers, most recent on 10/5/2013

  RE: Creating a music video using 5 performances of the same song
  Hi . . . . If above the Timeline you click on the tiny reel's down arrow you can select which track becomes active in the monitor. . . .  @Arthur-LW I presume you mean this button     This determines which movie is shown in the
• Movie Studio

  5 answers, most recent on 10/2/2013

  RE: Recording
  Hi Anirban, I sent this to you in a private message but thought I would post it here as well because even though we were talking about a different problem, I thought users here might benefite from this answer.  Yvon-robert is right, you can
• Movie Studio

  4 answers, most recent on 9/23/2013

  RE: New version - - yawn ..
  "What features would you have liked to see ?" -  Well, really hard to say. I just want to make movies myself without any automated tricks. If some of my footage is shit, I don´t expect the editing software to turn it into a masterpiece. No, I just
• Movie Studio

  2 answers, most recent on 8/9/2013

  Where is my music on Timeline Mode in MEP 2013 Pro?
  Just looking for help with the timeline mode.It does seem that this question has come up before but am still somewhat confused! I’ve added one of the included background music selections, but, when then switching to the Timeline Mode I cannot
• Samplitude

  4 answers, most recent on 9/8/2013

  RE: How do I stop Magix Music Studio re-recording track 1 into track 2?
  Hi John, Yes thats correct. Or even if I record 1 guitar track (Electro accoustic pluggedin with a 3.5mm jack) and then another guitar track over the top. I think it is a sound card issue. I have a Realtech High Definition sound card in. Now I
• Samplitude

  4 answers, most recent on 9/8/2013

  How do I stop Magix Music Studio re-recording track 1 into track 2?
  Dear people, I really need your help. I feel like I spend most of my time trying to sort problems out with Magix Music studio. Here is my current issue. I have recorded a drum riff into track one and this has all gone well. Now when I click
• Music Maker

  One answer, on 7/26/2013

  RE: using my own wav samples in magix music maker mx
  As per Magix if you read help file, all files should be of same BPM but some times we do some experiments with our music right? Me too got a lot of Royalty free purchased music other than Magix soundpools and I use in the Music. But there is one
• Samplitude

  17 answers, most recent on 7/25/2020

  RE: [Closed] How do I use score editor in Samplitude Music Studio?
  Thank you, Carl. It helps a bit, but it didn't answer my/our question at all. We're using Samplitude Music Studio in association with Music Maker.  Music Maker provides exporting each separate track/instrument of the Arangement in one go, making