• Other products

  13 answers, most recent on 9/2/2017

  RE: FTP ACCESS
  Hi . . . . they are just testing security modes aren't they and both of your fail anyway . . . . Yes they are , however in your log I cannot see whether your Filezilla installation is actually doing this, if it is not then there could be an issue
• Video Pro X

  42 answers, most recent on 9/19/2017

  RE: [Closed] [Feedback] How will Video Pro X change in 2018?
  To start with some small improvements; I use a lot of L and J cuts but with vpx I must always ungroup sound from video, make the L- or J cut and then re-group the objects again to make sure sound and video will not get out-of-sync. It would be
• Video Pro X

  18 answers, most recent on 12/13/2017

  RE: Best PC configuration for VPX
  I recently did some research into this and I found the following: decoding and encoding is normally done using intel quicksync. This offloads the work to a special circuitry on the chip so the actuel cpu itself remains free to do other things. I
• Rescue Your Videotapes!

  No answers, created on 6/13/2017

  Image quality when transfering from vhs
  I'm experiencing some side to side shakiness in the image when transferring from vhs. When playing the tape on a regular TV, these artifacts are not visible. Any suggestions to what i can do to make the quality of my transfers better? I have
• Movie Studio

  46 answers, most recent on 6/10/2017

  RE: Why doesn't the HVEC work?
  Hi Peter. Hi John - Have you seen any evidence that this card will support HW encoding in MEP? I'm going to try and make sure I write this carefully so there is no misunderstanding, essentially because I have never tried an HEVC export, but on my
• Movie Studio

  14 answers, most recent on 6/29/2017

  RE: Black frame between clips
  Hi Check that you have the latest patch version 15.0.0.107 installed. Black frames appearing can be a result of: The project frame rate setting and the video frame rate are not the same eg project 30 and video 29.97 fps.  If the camera recording
• Video Pro X

  13 answers, most recent on 5/15/2017

  RE: VPX - Upgrade 15.0.4.163 - New features other than those announced
  New patch just for HitFilm Changes in version 15.0.4.164: * Plug-ins from the Hitfilm Toolkit Pack are now correctly displayed in the Mediapool I have updated and the ones that I tried work. In one instance, some of the parameters did not kf with
• Video Pro X

  14 answers, most recent on 5/10/2017

  RE: VPX 365 Update Service - expiry and renewal
  After purchasing the upgrade, the email contains only the 3 add-ons. You have to go back into VPX, Help, Update online, and the program update box should now appear. Changes in version 15.0.4.163: * NEW: 10 additional video effects* NEW: Save color
• Movie Studio

  2 answers, most recent on 5/19/2017

  RE: Programme cant playback
  Hi This is usually an issue with the sound card - assuming you have an integrated sound card try the following: Check that the drivers are up to date Right click the speaker icon bottom right of your screen and select Playback devices Ensure that
• Samplitude

  23 answers, most recent on 8/26/2018

  RE: When I activate Asio Driver I can't hear real time playback in Samplitude
  I'm considering buying this next week. Will I have the same problems with it?  Anyone have any idea if it is suitable for Samplitude Music Studio if I use it solely for music nothing else?   Especially the sound card issue Johnebaker
• Movie Studio

  One answer, on 4/3/2017

  Movie Edit Pro 2014 ”Could not connect to selected device"
  Hello, I’m trying to import video from Sony HVR-A1E DV (PAL) VCR.Magix announces that it ”Could not connect to selected device". I’m using DVoutiLINK and there should not be any problem with my Firewire-card or WIN10 operating system. Could You help
• Movie Studio

  76 answers, most recent on 3/13/2017

  RE: HDR effect does not work with MEP2014, 2016 or VPX7 on new machine with new Win10 Pro installation
  This follows up on my last post, item #4. I'm pretty well out of my depth here, but I've pasted below some comments from a Win 10 group in which I raised the topic in case they offer any further lines of
• Movie Studio

  14 answers, most recent on 2/28/2017

  RE: Захвата видео с VHS камеры в AVI
  Hi Jeff Probably did not make it clear enough that I was referring to a "USB TV Tuner" Internal cards are not in the same class of device as USB devices. Assuming you have installed the Canopus software , then the most likely explanation is it is
• Movie Studio

  7 answers, most recent on 12/4/2018

  RE: Magix Movie Edit Pro 2016 freeze
  Hi . . . . E:\MULTIMEDIA\YI TEST\1.MP4 . . . . What is drive E: - an internal hard drive and external hard drive, memory card or memory stick, the camera or what? Are you using this file direct from the E: drive? John EB
• Movie Studio

  36 answers, most recent on 1/15/2017

  RE: First Impressions and troubles.
  Finally got a reply from Magix which confirms. "Please note that hardware acceleration in MAGIX software is applicable only under Intel graphics. You should enable your Intel component in your computer's BIOS if it is not showing in Windows device
• Movie Studio

  36 answers, most recent on 1/15/2017

  RE: First Impressions and troubles.
  Hi . . . . . Has anyone got this Graphics card.XFX HD-545X-ZCH2 Graphics Card (ATI Radeon HD 5450 1 GB PCI-E GDDR3 Memory DVI HDMI 1 GPU . . . . I had one in my old computer, a quad core pre Intel ix series being released, transferred to my current
• Movie Studio

  36 answers, most recent on 1/15/2017

  RE: First Impressions and troubles.
  Minimum Spec Graphics cards: Found this so Cyberlink are sticking their neck out:What are the minimum system requirements for CyberLink PowerDirector 15? CyberLink PowerDirector 15 minimum system requirements: Operating System Microsoft Windows 10,
• Movie Studio

  36 answers, most recent on 1/15/2017

  RE: First Impressions and troubles.
  Graphics Cards for MEP. A minefield: Has anyone got this Graphics card.XFX HD-545X-ZCH2 Graphics Card (ATI Radeon HD 5450 1 GB PCI-E GDDR3 Memory DVI HDMI 1 GPU). The spec says it can be used for Mp4 encoding and they refer to Roxio. Would this work
• Movie Studio

  36 answers, most recent on 1/15/2017

  RE: First Impressions and troubles.
  Hi Thanks for the info. . . . . AMDRadeon R7 Series.. . . . Driver 15.301.1801.1001.2-3-2016 . . . Check if there is an update for your particular R7 card - AFAICS the driver is now at version 16 released 20/12/2016. . . . . i5-3570CPU . . . Check
• Movie Studio

  9 answers, most recent on 12/20/2016

  RE: exporting error (length and audio are fine but footage keeps speeding)
  Hi . . . . when I match the frame rate (30) it's still glitchy and jerky . . . . What is your computer specification? -Include processor make model, graphics card make/model or chipset used, RAM and free hard drive space. Is the video glitchy after
• Movie Studio

  9 answers, most recent on 12/20/2016

  RE: exporting error (length and audio are fine but footage keeps speeding)
  Hi . . . . when I match the frame rate (30) it's still glitchy and jerky . . . . What is your computer specification? -Include processor make model, graphics card make/model or chipset used, RAM and free hard drive space. Is the video glitchy after
• Rescue Your Videotapes!

  2 answers, most recent on 12/19/2016

  RE: My magix ryvt will not allow me to save a video bigger than 200mb or 15% ....tells me I have no disk space on a 2 tb drive......
  Hi . . . . Got an e mail from Magix.......telling me to change my question? okay, simples, my version of Macix is not working? Will that do you . . . . Most definitely not. We need a lot more information - read this post and then come back with the
• Movie Studio

  14 answers, most recent on 12/15/2016

  RE: Why might I not be able to make keyframes for "Section" parameters?
  Thanks both for looking at this. Maybe "Section" can't be KF'ed because it has dependencies on and from other effects and if KF-ing were allowed the whole pack of cards would fall over! If anyone is interested, what I had in mind to achieve was to
• Music Maker

  4 answers, most recent on 12/2/2016

  RE: Can I use the sounds of my workstation in program magix music maker 2016 live?
  You should be able to. I have done it before with mine and Samplitude Music Studio (MSM). If you just want to play your Kurzwell and record the audio, that is easy. But if you want to play the Kurzwell, record MIDI from it onto a track and at the