• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  I'll try to answer some of your questions, although I have a very intensive filming and editing schedule over the next few months, so no time to play around with 3d filming, much as I would like to. Maybe later in the year I will get time to do some
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  I'll try to answer some of your questions, although I have a very intensive filming and editing schedule over the next few months, so no time to play around with 3d filming, much as I would like to. Maybe later in the year I will get time to do some
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  Hi Mindsong, After reading your post, I tried a quick experiment. For my general 3d for fun, I use either my Fuji W3 like you, or my JVC TD1 which both record a packaged 3d file in one container, so I thought I would try a pair of Panasonic FZ1000s
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  Hi Mindsong, After reading your post, I tried a quick experiment. For my general 3d for fun, I use either my Fuji W3 like you, or my JVC TD1 which both record a packaged 3d file in one container, so I thought I would try a pair of Panasonic FZ1000s
• Video Pro X

  20 answers, most recent on 3/21/2018

  RE: Does Video Pro X still Smart Render?
  Hi . . . . In your last example with a crossfade, you have chosen to smart render, it says that it will smart render but then to the right it says that it was unable to smart render. . . . . The options for Smart render and Smart copy were the same
• Movie Studio

  One answer, on 2/21/2018

  RE: Video won't end
  Hi and welcome to the forum Is this when previewing on the timeline or the exported video file? . . . . I checked carefully and didn't see any artifacts . . . . An 'artefact' may only be 1 frame long - in Movie Edit Pro did you zoom enough to
• Video Pro X

  14 answers, most recent on 2/22/2018

  RE: Choppier Playback in Video Pro X9 than with Video Pro X6
  Hi Seamus . . . . with 'Smooth Playback - Reduce Resolution' activated on X9, I get a small image on that screen. . . . I would suspect the BM 210 is set to display a video signal at 1:1 resolution rather than zoom to full screen. . . . . .
• Video Pro X

  6 answers, most recent on 2/20/2018

  RE: Coming soon, maybe, Effects Control Center
  Hi John CB First impressions of the Effects Centre - it is quick and easy to get effects onto a video or image, the interface works best with touch screen, touchpad or a graphics tablet, using a mouse/trackball is a little bit slower . IMHO the best
• Video Pro X

  14 answers, most recent on 2/17/2018

  RE: No audio after update
  Hello this is info from my file in mediatab ===================== General =====================Id                          : 0 (0x0)Complete name               : H:\Import Video Data\TVD_AVCHD\20171212\20171212\20171212194812.mtsFormat              
• Video Pro X

  10 answers, most recent on 2/6/2018

  adding movement to png file in video
  i am trying to add movement to a png file with in a video to make it zoom on slowly but when ever i drop it from the movemnt section it just show a picture of a beach. I have done this before with no issues using the same technique. Can you help me?
• Movie Studio

  13 answers, most recent on 1/29/2018

  RE: Smooth zoom transition with blur. I'm stuck!
  Hi Interesting one this! It appears this Directional Blur transition (Fade) effect has been hobbled in the latest MEP2018 version and I guess this is somewhat explained by its' description - Basic Effect Transitions. It is now a group of transition
• Movie Studio

  13 answers, most recent on 1/29/2018

  RE: Smooth zoom transition with blur. I'm stuck!
  Hi, Looking at the current special offering from Magix for MEP Premium, I see that it comes with: NewBlue Elements Overlay NewBlue ColorFast 2 iZotope RX Elements HitFilm Essentials NewBlueFX Stylizers 5 Imagine HitFilm Retouch but no HitFilm
• Movie Studio

  13 answers, most recent on 1/29/2018

  RE: Smooth zoom transition with blur. I'm stuck!
  Hi I have had a look at this transition from the demo video and I do not think this is one of the Blur-zoom effects - all these effects indicated by John CB have some linear movement left, right, up or down or radially - the sample video, AFAICS,
• Movie Studio

  13 answers, most recent on 1/29/2018

  RE: Smooth zoom transition with blur. I'm stuck!
  Hey, thanks for your reply. Having checked I can say that my version of Magix Movie Edit Pro Premium (2018) definitely does not have any effect called Blurry: Zoom or any others you mentioned, radial, etc - I'm guessing you made your video in a
• Movie Studio

  13 answers, most recent on 1/29/2018

  RE: Smooth zoom transition with blur. I'm stuck!
  Hi, Try under Templates, Effect transitions, Blurry: Zoom from bottom to top, or, Blurry: Zoom from top to bottom. The transition in the Magix video goes by so fast I can't tell. There are also the others, radial, left to right, and right to
• Movie Studio

  13 answers, most recent on 1/29/2018

  Smooth zoom transition with blur. I'm stuck!
  I'm hoping someone will be able to help me achieve the transition I'm aiming for - I've had no luck googling or reading the manual. An example of the transition I'm trying to achieve is in the Magix Movie Edit Pro promotional video on their website
• Movie Studio

  2 answers, most recent on 1/23/2018

  RE: 1 of my Tracks is Blocked
  Hi Craig, The disappearing video track when you slide it to the left is almost certainly due to a small sliver of clip left from where you trimmed a clip previously. If you zoom in on the timeline so that you can see more frames, you should be able
• Movie Studio

  5 answers, most recent on 1/20/2018

  RE: When I Import I get these two notices , what do they mean ?
  Hi Craig, If you have copied your files to an external HD connected to your computer, that should do and that is the way that most of us do it - to a drive that is not C (the operating system drive). Also, we make sure that we have a backup in case
• Movie Studio

  3 answers, most recent on 1/6/2018

  How Can I cut unwanted parts of a video
  I am a new user of Magix movie edit pro. I ave lately recoded a video using Zoom.us . I want to cut some unwanted parts of the generated mp4 video using this software. How should I proceed? The tutorials are not really accurate about that. Thanks in
• Video Pro X

  21 answers, most recent on 12/23/2017

  RE: Saving Audio Mixer settings
  Thanks Roger.That's not the way I work.I have 3 r16s to give me 24 direct inputs.Simply no room to set up to computer.I take files directly from the sd cards and do the whole lot in one project including video.Magix is the only program I have found
• Video Pro X

  21 answers, most recent on 12/23/2017

  RE: Saving Audio Mixer settings
  Hi Doug, I've done a lot of band recording over the years, both studio and live, audio only and video/audio and still do band videos from time to time. I do though work differently to you though, treating the audio mix as an audio only project
• Video Pro X

  3 answers, most recent on 12/15/2017

  RE: VPX9 - mask display ok, inverted in export
  Hi John EB, Thanks for checking. I will try out your solution and also check on my laptop to see if I get the same problem. In the meantime, I switched to the Cookie Cutter which works much better and I can feather the edges. I had tried making
• Movie Studio

  44 answers, most recent on 2/28/2018

  RE: MEP 2017(18) Pro - Latest Update
  Thanks JohnEB As I said the intro dialogue I just find annoying and could disable it in the previous version. JohnW I've already raised a support note, had a reply they're looking into it. Hi, I don't understand why you would want to eliminate the
• MAGIX

  No answers, created on 12/8/2017

  [Closed] New Patch for Video deluxe Premium (2018) - Version 17.0.2.158
  Important changes in version 17.0.2.158: NEW: List view in Mediapool as an alternative to tiles NEW: The Store now has its own tab NEW: Add tracks at any position NEW: Start dialog with a new design NEW: Automatic recognition and switching for 360°