Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

@Tristan-Weijermars This only works with Magix loops that are labelled with "Soundpool". If you bought loops from a different third party label you cannot add them as a Soundpool and need to drag and drop the loops from the internal file manager or

SOUND FORGE

8 answers, most recent on 10/8/2021

RE: editing Vegas audio clips with Sound Forge

- it opens another instance of SF. That never happened with earlier version(s) of Vegas and/or SF. @Frederick-Dispensiere8136, that is the "Multi-Instance" default setting, which was initially added in SFP-14 build 111. It can be set back to the

Movie Studio

5 answers, most recent on 10/7/2021

RE: Upgraded to 2022 Premium, now can't export videos

@Dave-Eric Hi Dave. In MEP 2022 open File / Settings / Program / Device options and in the drop-down box for Export, change the setting the Microsoft WARP. My 2019 Premium had no problems exporting, why is it now a problem with 2022? Because the

SOUND FORGE

24 answers, most recent on 10/7/2021

RE: error message, how to correct

In the Windows sound settings, is the mic and other device enabled, and do they work with other software?If the devices do not work in other software, also check the Windows 'Privacy' settings. A Win 10 update disabled my PC's internal mic not long

Video Pro X

2 answers, most recent on 10/4/2021

RE: Problem with Video Pro

@JuanCarlos-Martinez Hi and welcome to the user to user forums. In theory your system should be coping but I'm not sure due to your GTX 1650 would be an M version without it's own graphics processor port so in theory has to run via the Intel HD

Movie Studio

3 answers, most recent on 10/2/2021

RE: Clarification of Minimum Nvidia card required by MEP Premium 21.0.1.87

@Former user @AAProds Hi. You should check what is actually happening using Task Manager to monitor while exporting. While the program indicates hardware acceleration is in use the nvidia card may only be hardware rendering 3D content and not video

Movie Studio

23 answers, most recent on 10/3/2021

RE: Non-standard Export Frame Rate in MP4.

@Richard-Curtis Hi Richard. I have found over time that sometimes a work flow method that did not work previously will sometimes work better in a new program or worse depending on what has been done internally to the software and how capable the

Photo & Graphic Designer

3 answers, most recent on 9/30/2021

RE: Error message exporting to pdf - version 17 of Xara Photo & Graphic

Same here, with Xara Photo & Graphic Designer 17.1.0.60742 DL x64 Dec 10 2020... trying to export a 13 m x 2 m banner to PDF produces a "Internal program error 7724.k.xp.gn".

SOUND FORGE

24 answers, most recent on 10/7/2021

RE: error message, how to correct

What are you recording with, (microphone, turntable, cassette deck. other? How is it connected to your PC, soundcard or external interface? You want to state details for an accurate response. Read the 'Sticky'Confirm the desired audio interface item

Music Maker

4 answers, most recent on 9/27/2021

Sorry, Internal Error! (HELP)

For some reason I keep getting this error when I try to add a wav file to my project. I've uninstalled and reinstalled, but nothing changed.I'm using MMM 14on windows 10Let me know if any other information should be known.? does anyone have a clue

Video Pro X

122 answers, most recent on 11/21/2021

RE: Proposed new computer specs for using VPX

Hi, A few years ago, when my C drive was failing, I replaced it with a 256GB SSD that quickly proved to be too small. I replaced that with a 512 GB SSD and connected the 256 using a SATA to USB cable so I have an external internal SSD drive. I use

Video Pro X

122 answers, most recent on 11/21/2021

RE: Proposed new computer specs for using VPX

@browj2 Hi John. I'm running two internal WD 7200 SATA blacks for projects and they only have 32MB buffers but run projects just fine. Ray.

Video Pro X

122 answers, most recent on 11/21/2021

RE: Proposed new computer specs for using VPX

@Reyfox Hi, Adler Lake and so on. There will always be a next version; one of the perennial problems with hardware and software. One has to jump in the lake at some point. @CubeAce @johnebaker Hi Ray and John EB, Thanks for confirming what I

Movie Studio

12 answers, most recent on 9/22/2021

RE: VOLUME CURVE IN MEP

@VideoPro So the white line becomes the "ceiling" right? Green lines going above that line will not have any impact? The 'ceiling' is when you run out of bit bits in the bit depth selection of the audio recording which is always represented as 0db

Movie Studio

32 answers, most recent on 9/21/2021

RE: BIT RATE QUESTION

@emmrecs Hi Jeff, "Do Not Adjust" means the file will NOT be conformed to the project settings Actually, Project settings do not change and the imported file is adjusted to the Project settings, is it not? @VideoPro if I click DO NOT ADJUST, what

Music Maker

3 answers, most recent on 9/20/2021

RE: loading VST Instrument

@maldee VST files have a file ending like DLL or VST3. You downloaded a loop pack of WAV files from Producerplanet. You extract the ZIP file (by right clicking on it and then selection the extraction option). Now you should have a folder with WAV

Music Maker

4 answers, most recent on 9/16/2021

RE: Getting purchased items from store into Magix Musicmaker

@Mikey64 You can just drag and drop audio files from the internal file manager or Windows Explorer into your project.

Movie Studio

23 answers, most recent on 9/16/2021

RE: Sound and volume problems

@Arkadiusz-Marzec Hi. Thank you for all the additional pictures and further explanation. If your project is on the E: drive it is too full. It is why the bar has turned red. You need to create at least a 10GB space or preferably nearer 20GB

Movie Studio

23 answers, most recent on 9/16/2021

RE: Sound and volume problems

@Arkadiusz-Marzec Hi. Thank you for all the additional pictures and further explanation. If your project is on the E: drive it is too full. It is why the bar has turned red. You need to create at least a 10GB space or preferably nearer 20GB

Movie Studio

23 answers, most recent on 9/16/2021

RE: Sound and volume problems

@Arkadiusz-Marzec Hi. Thank you for all the additional pictures and further explanation. If your project is on the E: drive it is too full. It is why the bar has turned red. You need to create at least a 10GB space or preferably nearer 20GB

Movie Studio

3 answers, most recent on 9/15/2021

RE: CAN I INSTALL MAGIX ON PORTABLE USB DRIVE? PROS? CONS?

@VideoPro I would whole-heartedly endorse what @Former user has written! I'm honestly not sure it would even work to any acceptable degree! The installation writes a lot of data to your Registry, as well as (by default) putting a number of files on

Movie Studio

23 answers, most recent on 9/16/2021

RE: Sound and volume problems

@Arkadiusz-Marzec We will need your complete computer specs to see if there is a bottleneck somewhere in the system. Also make sure the project is not on your C: drive but either on an other internal drive or an external USB3 capable

Movie Studio

23 answers, most recent on 9/16/2021

RE: Sound and volume problems

@Arkadiusz-Marzec We will need your complete computer specs to see if there is a bottleneck somewhere in the system. Also make sure the project is not on your C: drive but either on an other internal drive or an external USB3 capable

Movie Studio

23 answers, most recent on 9/16/2021

RE: Sound and volume problems

@Arkadiusz-Marzec We will need your complete computer specs to see if there is a bottleneck somewhere in the system. Also make sure the project is not on your C: drive but either on an other internal drive or an external USB3 capable drive. Ray.