• Movie Studio

  7 answers, most recent on 5/20/2023

  RE: Benchmark Test for 2023
  @CubeAce Hi Ray Results from my laptop. Test 1 Device options set to RTX 2060 ( driver version 528.49 - 31.0.15.2849) and running in balanced power mode so not high performance mode plugged in. MP4 export time 12.16     CPU ave 32%  RTX 30%  HEVC
• Music Maker

  10 answers, most recent on 9/12/2023

  RE: crashes
  @Shaggy-Carter I don't know enough to help you, but you can help others help you by providing more info:- what version of MusicMaker (eg: 32.0.2.11)?- pitch and timeshift what?- what "drums"?- other problems?- does this happen with a particular
• Movie Studio

  23 answers, most recent on 6/25/2023

  RE: Optimum Windows Settings for Magix Video Editors
  @Scenestealer @johnebaker Greetings, I have to agree about the registry hack Peter, I read the article and it frightened me. Thanks for the info though. John, it's only the Intel drivers that are occasionally rolled back by Windows, the RTX drivers
• Movie Studio

  84 answers, most recent on 5/20/2023

  RE: Benchmark for Movie Studio 2023
  Al used one monitor plugged into the motherboard port. What type of port was it? It's plugged into the HDMI port. If Al is plugged only into the motherboard video port (again not sure what type of port that is) how is the nvidia card being
• Movie Studio

  84 answers, most recent on 5/20/2023

  RE: Benchmark for Movie Studio 2023
  @CubeAce Hi, My system's RAM ticks over at about 12GB so it running at 15GB for this export isn't much of an increase, & yeah the CPU is doing nothing, my motherboard/CPU has no onboard GPU, I did VPX14 AVC mp4 , it took slightly longer
• Movie Studio

  2 answers, most recent on 4/24/2023

  RE: downloading error
  @Sandra-Gallagher Hi Sandra and welcome to the user to user forums. The laptop must have the latest updates for, and be using either Windows 10 or Windows 11. The program will not run or install on Windows 8.1 or earlier operating systems. The older
• Movie Studio

  6 answers, most recent on 9/4/2023

  RE: HEVC Codec Problem?
  Yes I've upgraded: Processor i7-12700K Cooler  Noctua NH-D15 chromax.Black, Dual-Tower CPU Cooler (140mm, Black) MB ASUS Prime Z690-P WiFi NVMe Crucial P5 Plus 2TB PCIe 4.0 3D NAND NVMe M.2 Gaming SSD, up to 6600MB/s - CT2000P5PSSD8 Ram G.Skill
• Movie Studio

  19 answers, most recent on 10/1/2023

  RE: Cartoon R Plus effects
  @Robert-Day Hi Robert and welcome to the user to user forums. Although the specs page for the program gives you the minimum requirements to run the program there is a disclaimer (or at least there used to be) that you may need a higher specified
• Movie Studio

  84 answers, most recent on 5/20/2023

  RE: Benchmark for Movie Studio 2023
  @MarcinKrk Hi . . . . AMD vs Intel CPU, NVidia vs AMD GPU . . . In general terms, the combination I would recommend depending on how much you want to spend is: Low end - Intel CPU with integrated GPU with 6 to 10 cores*, and a Nvidia RTX 2000
• Movie Studio

  59 answers, most recent on 3/7/2024

  RE: No Hardware Acceleration / Encoding
  @Iris-Willis Hi We need more information: The Dell processor model number in full?  Can you post a screenshot of the Program Settings, Device options tab?  Does the Intel iGPU appear in the Device option GPU settings? Depending on the video format
• Music Maker

  22 answers, most recent on 3/20/2025

  RE: New Install; Music Maker 2024 - Laggy and Crashes
  @Can-Dive Hi . . . . It doesn't matter. It struggles with one track and a single drumbeat. Playback is laggy . . . . Open Windows Task manager, Perfomance tab and monitor the CPU, Disk and GPU's acivities - are any of them being overloaded when
• Music Maker

  22 answers, most recent on 3/20/2025

  RE: New Install; Music Maker 2024 - Laggy and Crashes
  @Can-Dive >> I noted in Task manager that the Nividia 4070 is not being used; only the Intel UHD graphics chip. Just a guess -- possible conflict between the Intel and Nvidia graphics? What happens if you remove the 4070 from the
• Movie Studio

  40 answers, most recent on 11/24/2023

  RE: Movie Studio 2024 Choppy/Laggy MP4 playback/preview
  @Videditor01 Hi, you may have found a solution & you say 'my graphics card is old' but can you click your icon at the top of this page - My Profile & fill in your Signature with the full name of your CPU, GPU & amount of RAM, also inc
• Video Pro X

  13 answers, most recent on 1/23/2024

  RE: Software Corruption?
  @Scott-Rindenow Hi. Is this your laptop? I notice that the image from the PNG at the end of the project is showing at the current location of the playback cursor. That to me suggests that the project may have corrupted or frozen if the cursor was
• Movie Studio

  7 answers, most recent on 7/7/2023

  RE: Mp4 playback and timeline issues
  @Francesca-White Hi, Further to what @johnebaker indicated, you can try going to the Program Settings (Y), Device options tab, and play with the dropdowns under Hardware Acceleration. Try CPU for all 3 for a start. What are your other options under
• Video Pro X

  8 answers, most recent on 5/1/2023

  RE: Magix stopes with the error messaged: Error in Module OpenCL.dll
  @Willig @Willig Hi. The only thing left I can think of is check that resizeable bar is off in the bios or on if it already on in the bios. While the 1080 can't use it and is probably ignored maybe the Intel chip needs to be set to be the same or
• Movie Studio

  12 answers, most recent on 9/19/2023

  RE: Magix Capture Error Message
  @PETER-SMITH1397 Hi Peter. The fact you have connected the camera to a fire wire-port, if the port is on the motherboard as opposed to a fire-wire card point to a pc, that motherboard is at most using and Intel Sandybridge processor and an internal
• Movie Studio

  14 answers, most recent on 4/8/2024

  RE: upgrade advice - movie studio suite 2023 to movie studio suite 2024
  Ray,   here is spec of pc i was going to purchase   what u think ?   >>>>>       This PC is ideally suited for higher-end 4K video editing work in applications like Adobe Premiere - a Ryzen 9 5900X 12 core processor and RTX 3070
• Movie Studio

  5 answers, most recent on 5/23/2023

  RE: Graphics Cards Use Compared In MEP 2021 to MMS 2023
  @AAProds ".....you can never have a fast-enough computer!" Geez Al - talk about a leopard changing its spots - not long ago there was nothing an aging Quad core couldn't do!😉 Good to see you are "onboard" at last. A couple of points:- "In MEP 2021
• Video Pro X

  111 answers, most recent on 1/29/2025

  RE: Feedback about VIDEO PRO X15
  @Craig-Wilkins, @AAProds Hi . . . . the Proxy system is still bugged in MMS 2024: A proxy is created for the first file imported but skipped for all others.  . . . . This only occurs if you have the Automatically Create proxy files option turned on
• Movie Studio

  4 answers, most recent on 9/17/2023

  When I speed up a clip, the audio stops functioning.
  When I speed up a clip in Movie Edit Pro, it loses the sound. If I adjust the clip back to 0 speed (base speed), the sound comes back. If I adjust the speed slower, the sound slows, but is still there. If I render the project, in the MPEG the sound
• Movie Studio

  One answer, on 9/15/2023

  Advice Requested: Second Monitor
  I just finished searching the forums for these two phrases... Two Screens Second Monitor ...and Came up empty-handed on both searches What I'm seeking is knowledge to help me guide my expectations; hopefully before I go doing something really
• Video Pro X

  11 answers, most recent on 4/26/2023

  RE: Video did not upload from PC
  Hello, here is the screenshot with green. This sometime disappear after some time. Play with CPU or GPU unfortunately means nothing for me. I am 66 year old man. I like videos and photography but my computer knowledge are limited. Anyway thank you
• Video Pro X

  26 answers, most recent on 9/14/2023

  RE: Import issues
  @AAProds Hi Al. OK, point taken. But then maybe it is a memory problem. @bvolbeda complained in another topic that VPX 13 was freezing. bvolbeda at that point published their system spec as being Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz   3.50