• Movie Studio

  13 answers, most recent on 1/30/2015

  SSDs and improved performance in MEP
  Hi I have started a new thread about this discussion in this thread: http://www.magix.info/us/using-last-templates.forum.1119765.html This is copied from discussions I had with Ralf from support, a little while ago that stemmed from his
• Movie Studio

  12 answers, most recent on 1/30/2015

  RE: Using 'Last templates'
  Hi . . . . I suspect that the destination is not the bottleneck . . . Correct - the bottleneck on a fast machine is the SATA interface / HDD  which on a single hard drive is having to constantly switch from Read to Write during rendering. As
• Movie Studio

  6 answers, most recent on 11/26/2015

  RE: DVD durations?
  Hi @ Terry The 'traditional' guidelines based on the disc standards and specific compression ratios are- DVD5 discs (single layer) specification states up to 120 mins of video   BD (25GB disc) up to 240 mins (720p?) or 120 mins
• Movie Studio

  29 answers, most recent on 1/8/2015

  RE: Audio Corruption when I CROSSFADE or use any video fades?
  Heres the official line to this problem :( Regarding your problem: Looks like we could replicate your issue here. It's similar to an issue we had before, but that was fixed in the previous version via an update. Your issue now seems to be
• Movie Studio

  4 answers, most recent on 12/31/2014

  RE: Movie Editing Best Practice suggestions, please
  Hi, Further to Terry's reply, it's obvious that you are just starting and that you have a lot to learn, and there is a lot to learn. I strongly suggest that you first read the "Quick start" part of the manual before continuing on. You should
• Video Pro X

  One answer, on 12/24/2014

  1080p23.976 Timeline to Blu-ray 1080 29.976
  Normally, when I have 23.976 footage, SD or HD, when I'm burning to DVD, I choose NTSC 29.976 and set scan type to Progressive.  This gives me, I believe, 3;2 Pulldown (or something like that!) and my NTSC DVD looks just like 23.976 on
• Movie Studio

  20 answers, most recent on 12/22/2014

  RE: Proxy much larger than original file
  @Jeff, The letter "P" in the Magix Music programs, Music Maker, Music Studio, opens the Program Settings, whereas in MEP and VPX, "Y" does this. I have often mistakenly pressed on "P" in MEP. Nothing happened so I pressed "Y." I never did
• Photostory

  8 answers, most recent on 12/15/2014

  RE: DVD will not play in Samsung Blu-ray player
  Not exactly sure how this message system works but here goes.  To answer your question, the DVD disc burned with Photostory 2015 would not play in either my Toshiba DVD player or in my Samsung Blu-ray player. Since my last message I have tried
• Movie Studio

  4 answers, most recent on 11/29/2014

  RE: Movie Edit Pro Plus 2014 - how to resolve encoding errNo 5
  Hi John Herewith the full error log: 28/11/2014 23:27:58.228:   setting no speed limit 28/11/2014 23:28:17.022:   setting no speed limit 28/11/2014 23:29:40.972:   Open Project: Ski_season_2014v43hp -- avchd project 2014-11-28 28/11/2014
• Video Pro X

  5 answers, most recent on 12/6/2014

  Severe problems with VPX5
  The image above is one I am seeing very regularly at the present time, to the point where VPX5, despite a recent uninstall and reinstall, is becoming unusable for me.  And that is very serious since I use it as part of my
• Video Pro X

  7 answers, most recent on 11/22/2014

  RE: AVCHD import of contiguous sequence
  You might have proceeded past this point by now, but to join the multiple contiguous AVCHD files into one, try using DOS copy.  For example (copy /b file1 + file2 + file3 newfile).  This works perfectly for me when my Canon HF-M41 camcorder
• Video Pro X

  7 answers, most recent on 11/22/2014

  RE: AVCHD import of contiguous sequence
  You might have proceeded past this point by now, but to join the multiple contiguous AVCHD files into one, try using DOS copy.  For example (copy /b file1 + file2 + file3 newfile).  This works perfectly for me when my Canon HF-M41 camcorder breaks
• Movie Studio

  One answer, on 11/20/2014

  RE: Difficulty uploading video from camera into MMMP 1015
  Hello Michael.  I can't answer your question from direct experience so this may not be helpful, but  1.  Have you tried clicking on the "highlighted MMEP 2015" icon mentioned in your first paragraph?  If you do, what happens? 2.  Although I
• Movie Studio

  One answer, on 11/20/2014

  Difficulty uploading video from camera into MMMP 1015
  Hi I connect my cameras USB socket to my comuter, the screen on camera says PC connect. I press PC, a menu comes up on my monitor asking me what I want to do, MMEP 2015 is already high lighted so I ignnore this sreen like I did in MMEP
• Video Pro X

  8 answers, most recent on 11/19/2014

  RE: Video cleaning - NeatVideo plugin
  Hi Jeff, Mediterranean cruise. Lovely! We woke up to snow on the ground here on Sunday, with more slushy snow yesterday, that is ice today. I agree with your workflow with NV. What I was trying to fit in was getting the profile early for
• Movie Studio

  4 answers, most recent on 11/13/2014

  MEP2015Plus - how to force DVD to render from original sources, not from existing proxies
  Since I knew that I would need DVD output from a multi-cam project, I selected "make suitable quality for DVD" proxies when bringing in my four 1080i50 AVCHD sources. The project is now completed and ready to be output. However (as I have
• Movie Studio

  15 answers, most recent on 1/13/2015

  RE: Video playback very slow
  Hi The hardware acceleration setting you need is this one 'GPU acceleration for transitions'  in the programs settings   The proxy option is here in the projects settings   . . . . hardware accel is for exporting MPEG-4/AVCHD . . .
• Movie Studio

  15 answers, most recent on 1/13/2015

  RE: Video playback very slow
  Hi, I's accept slowdown on HD footage - but as I mainly deal with standard def this wasn't an issue. The frame rate during preview seems fixed - doesn't matter if I use hi-def or standard footage, full-screen view of the video, untick the
• Movie Studio

  5 answers, most recent on 11/9/2014

  RE: MEP 2015 Plus 14.0.0.162 - Problem with copy & paste
  Hi I would suspect your computer is running out of resources / memory and has no free resources available to perform the copy action. Quite possible, but I don't think so. I believe it's more likely I did something unwittingly that
• Movie Studio

  5 answers, most recent on 11/9/2014

  RE: MEP 2015 Plus 14.0.0.162 - Problem with copy & paste
  Hi I would suspect your computer is running out of resources / memory and has no free resources available to perform the copy action. It will also be performing a significant amount of disc swapping,  4 x 3 hr long HD videos must be in the
• Movie Studio

  5 answers, most recent on 11/9/2014

  RE: MEP 2015 Plus 14.0.0.162 - Problem with copy & paste
  Hi . . . . 4 camera multi-cam, 1920x1080 AVCHD remuxed to .ts, single 3 hour takes . . . . Are you saying you have 4 x 3hour HD videos taking up tracks 3-10 which you are multicam editing onto tracks 1 and 2 ? Why did you remux them? John
• Movie Studio

  5 answers, most recent on 11/9/2014

  MEP 2015 Plus 14.0.0.162 - Problem with copy & paste
  I found my self this afternoon unable to copy/paste a simple group (of one graphic of a straight line, coincident with a title in the track below) from one place to empty space later down the same pair of tracks. Yesterday I could this; between
• Video Pro X

  9 answers, most recent on 11/4/2014

  RE: video graphics card for x6
  Hi Greg . . . . I can render a 1hr 8min video, (4.5Gig) 1280x720 HD, . . . . How long does this take and is this to MP4? . . . . I get an error when exporting MP4 when "hardware acceleration for MPEG-4/AVCHD export if possible" is checked in
• Video Pro X

  9 answers, most recent on 11/4/2014

  RE: video graphics card for x6
  I found this card on sale, so I felt a bit better purchasing it.  I use Photoshop CS6, and it will help me with that too. I don't know much about the K620. Regarding performance: Using the control panel performance info, 7.6 out of 7.9