• Movie Studio

  3 answers, most recent on 5/23/2021

  RE: Can Movie Edit burn 3DBD?
  @Philip-White Hi . . . . None of the options on that screen appear to indicate the standard format used for 3D on Blu-ray. . . . . Side by side and Top/Bottom require the 3D TV to support this - most did - and must be switched manually to display
• Movie Studio

  3 answers, most recent on 5/23/2021

  RE: Can Movie Edit burn 3DBD?
  @Philip-White Hi . . . . Movie Edit Pro can create side-by-side 3D, but can it also produce 3D Blu-Ray video disks . . . . It can - click the options indicated below However is your TV is using shutter glasses they may not work or you have to
• Rescue Your Videotapes!

  4 answers, most recent on 5/21/2021

  RE: Interlacing
  @Ricadonna Hi . . . . . does this mean that I should export to a non-progressive format for the clearest picture . . . . Assuming the source/captured video is interlaced - then neither are 'clearer' then the other - it all depends on the media
• Video Pro X

  28 answers, most recent on 5/9/2021

  RE: 100% Hang while Exporting 4K Video, Regardless of CODEC
  @Wayne-McIlvaine Well the suggestion others made that VFR might be causing the encode to crash could still be a factor, but just spreading the encoding load on to the Nvidia GPU might help the crashing problem. Peter Thanks again! I am doing a
• Movie Studio

  17 answers, most recent on 5/9/2021

  RE: ISO created, VOB file audio identified as MP3
  @mark-perry Hi Mark Thanks for the clarification - it helps clear up what the demonstration image and video were showing, I would suggest you leave the post as is, otherwise it is going to cause more confusion with what the subsequent posts were
• Movie Studio

  17 answers, most recent on 5/9/2021

  RE: ISO created, VOB file audio identified as MP3
  Rather than waste any more discs if you do as Scenestealer suggests and use AC-3 audio you should avoid any problems irrespective of which Player/TV combination you use.
• Movie Studio

  17 answers, most recent on 5/9/2021

  RE: ISO created, VOB file audio identified as MP3
  i'm thinking everything's fine and it's probably just a result of the fitting to disc process and nothing more and that player by its software just happened pick it up, to me it would seem daft it if the process transferred to a physical disc then i
• Movie Studio

  17 answers, most recent on 5/9/2021

  ISO created, VOB file audio identified as MP3
  intent: 4 Hour dual-layer DVD, source: vhs PAL tape excellent source some stop and go's with tiny gaps (not many say 10 about 30 sec or less) to cover clogs etc. all gaps and files grouped. no further mixing done...yet. Chapters placed
• Movie Studio

  6 answers, most recent on 4/29/2021

  Producer Planet or alternatives
  Just browsing on Producer Planet for ‘TV News Studio’ type Intro videos. Sure I have seen them before but this time I could not even see one, although could be me. However I then wondered whether has anyone any other useful ‘go-to’ sites to check
• Rescue Your Videotapes!

  5 answers, most recent on 5/2/2021

  RE: Video picture flickers
  HII have similar problems and i have even replaced all the cables.Have tried with desktop and laptop and also tried different outputs. When I play on TV thers no disturbances. What is the problem???
• Rescue Your Videotapes!

  3 answers, most recent on 4/27/2021

  RE: Difference between various dongles colours red white black?
  @Beardeboss Hi . . . . I posted the Same thing twice by accident  . . . The most common cause for that is double clicking the Submit button this is a subconcious action for a lot of computer users. However I see that your posts are 5 mins
• Video Pro X

  8 answers, most recent on 4/27/2021

  RE: Blackmagic Output Preview not continuously updating in timeline scrub
  Ok yes very good I will try that. It might well be my system that is causing the lag in scrubbing as it is rather an old system and am looking to update it at some point soon. But for standard Definition it is working very good considering its age.
• Video Pro X

  8 answers, most recent on 4/27/2021

  Blackmagic Output Preview not continuously updating in timeline scrub
  Having Recently purchased VPX mainly for use with my Blackmagic Intensity pro to enable me to use the Full Screen Video Preview to a Full Size Television. I am noticing that the actual output is only shown and sent when actually playing the movie
• Rescue Your Videotapes!

  3 answers, most recent on 4/25/2021

  RE: Cannot get VHS player to connect
  @Courtney-R Hi . . . . The TV/player has only one SCART connector, but as it is a TV/VHS player I'm not sure if possibly it is only an input connector. . . . . That is quite possible - what is the make /model of the TV/Player? John EB
• Rescue Your Videotapes!

  3 answers, most recent on 4/25/2021

  RE: Cannot get VHS player to connect
  Hi John, thanks for your response!When capturing from the camera I was using the Red/Yellow/White cables connected to the USB converter. I'm not sure what you mean about the VCR recording settings being the same as the camera? The TV/player has only
• Rescue Your Videotapes!

  3 answers, most recent on 4/25/2021

  RE: Cannot get VHS player to connect
  @Courtney-R Hi and welcome to the forum. When capturing from the camera were you using the camera connected to the Composite input on the USB converter?   . . . . I am using a combination TV/VHS player . . . . Are the VCR recording settings the
• Rescue Your Videotapes!

  3 answers, most recent on 4/25/2021

  Cannot get VHS player to connect
  I have been using the RYVT successfully with a camcorder for a while now, but have only just tried it for the first time with a VHS player and cannot get anything to register on RYVT. When I get to the "Transfer video to computer" window the screen
• Video Pro X

  119 answers, most recent on 5/4/2022

  RE: Endless Stream of Vegas posters
  @ericlnz Hi Eric. I often wonder why some users are so keen to have someone on the other end of the phone. Even if you have someone who speaks your language it may be in an accent you cannot understand! It's not just that. G5 signals are for a lot
• Photostory

  2 answers, most recent on 4/18/2021

  RE: Burning to a regular dvd disc
  @John-Jefferson Hi and welcome to the forum. . . . . error message when trying to playback a regular DVD. "Playback prohibited by area limitations . . . . Is the error message from a regular DVD or Blu-Ray player - if so what TV format is it - PAL
• Movie Studio

  26 answers, most recent on 4/17/2021

  RE: Mini DV AVI Smart Render? and Questions about BM Output possible?
  @browj2 Hi . . . . NTSC = Not The Smartest Choice . . . . Funny - I knew this as' Never The Same Colour' due to pronounced colour drift in the early days of colour TV - PAL (Phase Alternating Line) never suffered from this. John EB
• Movie Studio

  26 answers, most recent on 4/17/2021

  RE: Mini DV AVI Smart Render? and Questions about BM Output possible?
  @CubeAce, @AAProds HI . . . . I think the odd frame rates were due to the analog technology of the time and trying to avoid clashing screen refresh rates (or divisions of frame rates) and causing a strobing or flickering effect on a TV screen of the
• Movie Studio

  26 answers, most recent on 4/17/2021

  RE: Mini DV AVI Smart Render? and Questions about BM Output possible?
  Hi Alwyn. I think the odd frame rates were due to the analog technology of the time and trying to avoid clashing screen refresh rates (or divisions of frame rates) and causing a strobing or flickering effect on a TV screen of the time. As most of my
• Movie Studio

  26 answers, most recent on 4/17/2021

  RE: Mini DV AVI Smart Render? and Questions about BM Output possible?
  @Beardeboss Hi The only thing I am missing is to be able to use my Black Magic Intensity Pro as a Video Monitor Out which I understand is only available with Video Pro X. I am not entirely sure what configuration you have with your TV and what the
• Movie Studio

  17 answers, most recent on 4/27/2021

  RE: Main Concept MPEG-4 Codec
  @Beardeboss Hi My opinion differs to @johnebaker and @emmrecs as I have used the MC encoder for many years as it used to be the default encoder in MEP and have had good results. The zero byte bug only occurs with HWA encoding to .MP4 and not with