• Movie Studio

  4 answers, most recent on 12/17/2008

  RE: clicking sounds at regular intervals.
  Hi, Sorry to hear this. Apparently an undesired side effect of the DVdate conversion process. I can't really say that I've experienced this problem before when using DVdate to convert DV AVI to type II in order to fix that audio problem.
• Movie Studio

  One answer, on 12/15/2008

  RE: need big help!
  Hi, I'm afraid some further clarification as to details of this problem might be needed. From reading this, I'm still not completely sure what stage of the program you're actually in when this crash occurs. Are you suggesting that you only just
• Movie Studio

  One answer, on 12/15/2008

  RE: [Closed] Magix movie editer Burning Problem?? help please
  Hi there, My recommendation would be to go for the option to have the bit rate adjusted, so it will fit on one single DVD. A little background information: Basically, when you burn a video DVD, your whole material is encoded into MPEG-2 video.
• Movie Studio

  4 answers, most recent on 12/17/2008

  RE: clicking sounds at regular intervals.
  Hi, If you don't notice the audio problem (or any other problem, for that matter) on some of the files you're importing, I suppose you don't really have to convert those. Mixing the converted and unconverted files within one project shouldn't be
• Movie Studio

  One answer, on 12/11/2008

  RE: Ii have a JVC miniDV camcorder.
  Hi there, If this is a miniDV camera, you should use the iLink connection on the camera. That's basically just another name for FireWire. So, you will need a FireWire/DV cable and a FireWire controller/socket on your system. If your computer is
• Movie Studio

  4 answers, most recent on 12/17/2008

  RE: clicking sounds at regular intervals.
  Oddly enough, I just answered a question a few minutes ago that apparently refers to the same problem, even though it's not the most common issue.  See
• Movie Studio

  One answer, on 12/9/2008

  RE: [Closed] In MEP14 while in edit mode during play back I hear audio clicks
  Hi there, What format are be talking about? DV AVI by any chance? Just try the following: Download the free utility DVdate and use it to convert the files you've captured in Vegas from DV AVI type I to DV AVI type
• Rescue Your Videotapes!

  One answer, on 12/3/2008

  RE: I plug my camera Panasonic NV-GS11 via ieee1394 cable/pcmci but magix doesn't recognize camera
  Make sure you're connecting via Firewire and using the regular DV capture dialog in the program. If you really can't get the program to connect to your DV camera in the regular (DV AVI) capture mode, try using the MPEG-2 capture mode that is also
• Movie Studio

  One answer, on 12/2/2008

  Need help adding a place to drag a picture to go with a song.
  I'm a first time user of 14, it has taken me 3 wks to figure out how to get a movie off my mini dv to this program.  Now that I have done that, I placed a song to start off the film, which is my mothers funeral service but when that song plays there
• Music Maker

  One answer, on 11/25/2008

  Recording Time Delay
  First off, my problem. Ok, when I have one track lain down and I make an attempt to record a second track over it there is a delay between the two, where as when I initially recorded them with the playback going, they were at the same time. I've
• Movie Studio

  2 answers, most recent on 11/18/2008

  RE: [Closed] Problem with transfer or import HD video (format .m2ts)
  You wouldn't use the option to capture directly from a camera for AVCHD camera technology. The process of capturing is strictly for tape-based cams, both digital and old analog models. Naturally digital (DV/HDV) capturing and analog capturing work
• Movie Studio

  3 answers, most recent on 11/3/2008

  RE: [Closed] When trying to transfervideo from my palmcorder into Magis Movie Edit Pro 12, I get a 'Could not connect to service device" error.
  Ok, I see. I guess I was just trying to figure out what kind of hook up you have (USB?). But you are able to capture the videos to your hard drive using another software - the one that came with the camera perhaps? If that's the case, then that's
• Movie Studio

  3 answers, most recent on 11/3/2008

  RE: [Closed] When trying to transfervideo from my palmcorder into Magis Movie Edit Pro 12, I get a 'Could not connect to service device" error.
  This option is just for DV cameras with cassette tapes - if this is the kind of camera you have, then make sure to have it hooked up via Firewire cable.  If your camera saves to hard drive or mini-DVD instead, you don't need to use the program to
• Movie Studio

  One answer, on 11/3/2008

  My playback is not smooth, even on half resolution playback.
  I'm using 'movie edit pro 14 download plus' with 1gig of ram, single core, 3.4ghz processor. I'm importing MP4 files from a Samsung DV camera. I downloaded the Magix MP4 codec which imports the files fine, have tried mixdown after editing, but the
• Movie Studio

  2 answers, most recent on 11/6/2008

  Syscheck results...PLEASE HELP!!!
   im having problems with some video files in magix movie edit pro 12 the video from my camcorder (samsung SC-X105L) so i contacted magix support ect... i sent him video file for analysis and he said it worked on his computer ect... so he
• Movie Studio

  One answer, on 9/17/2008

  RE: Could not connect Sony HDR-SR10E to selected device
  Hello, the HDV record feature in MEP 14 is meant for HDV cameras which record on DV-tapes and which are connected via firewire (not via USB). You have no choice but to import the .m2ts files Hope this clarifies... B.
• Movie Studio

  2 answers, most recent on 9/28/2008

  RE: mpeg4 doesnt record video just audio.
  I'm new to MEP14 but I used MEP11 for a year now and had to create a dv-avi file then import it to another program that came with my camera for free to create a MPEG4 file to up load to youtube and myspace. It says on the box that it is youtube
• Movie Studio

  One answer, on 9/2/2008

  How to combine 3 dv tapes into 1 movie?
  I am using Movie edit pro 12.  I have 3 dv tapes downloaded on my computer as tape 1, 2 and 3. My disk project shows all three.  Tape1.mvd, Tape2.mvd and Tape3.mvd..  How do I combine all three for one continuous movie.  Thanks..
• Movie Studio

  2 answers, most recent on 8/20/2008

  RE: Uploading DV tapes via USB
  You can only upload DV material into MAgix software via firewire. Don' quite understand the term upgrade if you don't have firewire, but, that's ok. All you need to do to get around this problem if you already have your new laptop would be to import
• Movie Studio

  2 answers, most recent on 8/20/2008

  Uploading DV tapes via USB
  Hi all, Newbie here with a question - sorry if this has been answered already. I have been using a laptop with Firewire to transfer SD DV tape footage to Movie Edit Pro 14 with no probs, however I am upgrading to a new more powerful laptop that
• Movie Studio

  One answer, on 8/20/2008

  All video time captured but no video or sound after a certain point.
  I am using Vista and I purchased edit pro 14.  I can capture all the video from my DV camera which is about 75 min worth of video, but when I go to edit the video on 45 min show on the edit screen.  I can see the rest of the time in the timeline but
• Other products

  One answer, on 7/15/2008

  RE: [Closed] How do I get sound from recording videos/movies?
  Hi there, Can you provide a little more information about what exactly you're recording? Is this a DV capture, analog capture, screen capture etc.? What's your equipment and your setup? I'm afraid this hasn't become clear yet.
• Off topic

  One answer, on 7/3/2008

  RE: Black and white and no colour - Product : Fiml sur DVD 7
  Hi there, What kind of video capture are you trying to perform? Analog or digital? If this is a capture of a digital camera (with miniDV tape), you need to connect the camera via FireWire/IEEE1394. This is the only really supported option. If
• Movie Studio

  5 answers, most recent on 7/20/2008

  RE: very frustrated newbie
  If Movie Maker doesn't want to properly detect and interface the camera either, the problem might be on a lower level, but you could still try the following: In Movie Edit Pro's DV capturing dialog, make sure the video preview checkbox is enabled.