• Movie Studio

  28 answers, most recent on 8/10/2022

  RE: Suddenly Movie S is not decoding Lagarith or Huffy encoding correctly
  Apparently, the problem is in the section of the MS code which decodes Lagarith. I deleted the Lagarith codec from my pc, but MS still could read the Lagarith files, but could not write them. They have their own embedded decoder which may also be
• ACID

  8 answers, most recent on 7/9/2022

  RE: Steam maker no work
  This is abuse and inconsiderate treatment of your clients like me 😡. The tool that they propose as a solution does not sound better than the one that they have eliminated and to top it off, in addition to being an external application (with the loss
• Music Maker

  10 answers, most recent on 6/28/2022

  RE: Metadata
  @David-Pook HI, Music Editor is one of the programs under Downloads that you should have downloaded and installed. Once done, you'll see it show up in Program Settings, Folders. Look up external in the pdf manual to see how this works. Do a mixdown
• Video Pro X

  6 answers, most recent on 7/18/2022

  RE: Blu-ray burned with MEP-13 does not play on new Blu-ray players
  @Ralph_S Hi Ralph Can the PS3 backup the video disc to its internal hard drive and then backup that to a USB memory stick, or possibly copy it direct to a USB memory stick? The manual would suggest this is possible as the disc has no copy protection
• Samplitude

  3 answers, most recent on 6/27/2022

  Samplitude will not record ubder any combination of audio setup or
  I moved my Samplitude from Windows 10 to Windows 11. Now I cannot recrd from external sources although I can copy and play back CD tracks. I also cannot access the System menu suggested by the On board help
• Movie Studio

  10 answers, most recent on 7/31/2022

  RE: Creating Slideshows
  @Dino-AB Hi. Who made Pro-show? The only Proshow slide maker I can find is by Movavi and as far as I can tell is still supported but limiting in use so I doubt it is the same program. Movie Edit Pro (Now known as Magix Movie Studio) doesn't really
• Music Maker

  10 answers, most recent on 6/28/2022

  RE: Metadata
  @David-Pook HI, Music Editor is one of the programs under Downloads that you should have downloaded and installed. Once done, you'll see it show up in Program Settings, Folders. Look up external in the pdf manual to see how this works. Do a mixdown
• Music Maker

  10 answers, most recent on 6/28/2022

  RE: Metadata
  @David-Pook @johnebaker Hi, If you have Music Editor installed (it comes with Premium) then you should be able to do a mixdown and edit the resulting file in the external editor, Music Editor 3. There, you can add ID3 information for each track and
• Video Pro X

  6 answers, most recent on 7/18/2022

  RE: Blu-ray burned with MEP-13 does not play on new Blu-ray players
  @Ralph_S Hi . . . . Is this a Codex issue? . . . . No - the BluRay standard has not changed, modern players must still meet the standard so old discs are palyable unless . . . . . . . . . . burned Blu-Ray discs of an adventure using MEP13 . . . .
• Music Maker

  10 answers, most recent on 6/28/2022

  RE: Metadata
  @David-Pook @johnebaker Hi, If you have Music Editor installed (it comes with Premium) then you should be able to do a mixdown and edit the resulting file in the external editor, Music Editor 3. There, you can add ID3 information for each track and
• Samplitude

  6 answers, most recent on 7/6/2022

  RE: Download and install
  My cd Dvd drive doesn't work on that computer I'm putting it on. I try to make a ISO file for it but every time I open it up it freezes. Just like it's looking for the CD drive to open it. And it does work on Windows 7 believe it or not you got to
• Music Maker

  6 answers, most recent on 7/8/2022

  RE: Recording while listening. Can only do it with the video program
  Thank you SP. I can now see that the program did record my voice. But I could not hear it while I was recording and there were no vu meter things indicating that it was recording. It just showed up as wave form after I stopped recoding. When I
• Movie Studio

  3 answers, most recent on 6/24/2022

  RE: Assigning Save/Capture Folder - MEP 2016 Plus
  @CarpentersMate Just 'confirming' for obvious reasons keeping 'capture files' sound effects etc, off the system drive, am I able to assign 'any storage drive' as a capture drive? Yes. What I do is create a separate folder for each project on my
• ACID

  4 answers, most recent on 7/1/2022

  RE: Possible to download loop content from Acid Pro 6?
  @Sean-Dennis Have you registered your software to a Sony user account? You can still use your login credentials at https://www.magix.com/int/support/my-service-center/ Maybe you can download the full content from there. Magix sells a lot of ACID
• Music Maker

  2 answers, most recent on 7/1/2022

  Questions about MM Premium
  I'm using Windows 10 with Edge Browser. 4.00 GB RAM. 64-bit operating system. AMD Athlon(tm) II X2 B26 Processor 3.20 GHz. 148 GB Hard Drive. Does MM Premium allow you to export your created music files to an external flash drive in Mp3 format? I
• Music Maker

  10 answers, most recent on 6/28/2022

  RE: Metadata
  @johnebaker Hi John EB, I just took a look at Magix.com comparison table and Music Editor isn't listed. That would mean that it showed up under Downloads for me due to having older activated Premium Editions. I see no way to purchase it. Sound Forge
• Movie Studio

  19 answers, most recent on 6/30/2022

  RE: Convenient Place To Buy Plug In's?
  @CarpentersMate Hi, Since you're using MEP2016, the Store was not yet available. If you upgrade to a more recent version, the Store has a lot to offer: Here are some past threads containing information on external effects plugins: First
• Movie Studio

  One answer, on 6/23/2022

  Can't see all of my files in the Media Pool
  I've been a longtime user of Vegas/Magix Movie Studio and just recently upgraded to the 2022 version of the software. One problem I've been having lately is that when navigating the Import Tab/Media Pool, I can't see/access certain files, namely
• Movie Studio

  26 answers, most recent on 8/20/2022

  RE: Sound Mixing problems
  @johnebaker @browj2 Hi John. (CB) That doesn't happen for me. Nothing on the track on either side of an object, Curve does nothing. If there is an adjacent audio object, then it will affect that object, but not the track curve. Can you demonstrate
• SOUND FORGE

  8 answers, most recent on 9/28/2024

  RE: SF Audio Studio cannot see external drive
  thouston@ unfortunately, nothing has changed for me in this topic. I haven't had time lately, but I'll try to get some other external CD-ROM drive and give it a try. I will write what the result will be.
• Audio Cleaning Lab

  12 answers, most recent on 9/22/2025

  RE: insuffient memory
  Hi and thank you for the reply. I'm using a 256gb SSD internally with only 48gb available right now. I did not change any default Windows setting for Page file sizes. I have three external drives: virtual instrument libraries and samples (1TB SSD),
• SOUND FORGE

  8 answers, most recent on 9/28/2024

  RE: SF Audio Studio cannot see external drive
  @wieslaw-slota I'm having the same problem with Sound Forge Pro 15 and an external Prioneer BDR-UD03 (in a Verbatim shell). I try to extract audio from a CD and Sound Forge just hangs on "Scanning for Devices...". Were you ever able to resolve this
• Audio Cleaning Lab

  12 answers, most recent on 9/22/2025

  RE: insuffient memory
  @Dave-Crippin Hi Thanks for the extra info. . . . .  It does start up after OKing this a few times . . . This would suggest that the external hard drives or USB ports have been hibernated by Windows and are taking time to 'wake up'. Check the
• Audio Cleaning Lab

  12 answers, most recent on 9/22/2025

  RE: insuffient memory
  @Ulf-Zakariassen, @Dave-Crippin Hi We need more information: What type and size is the C: drive fitted in your computer/laptop?  How much free space is available?  is Windows controlling the Page file sizes or has this been set manually? If you do