• Movie Studio

  66 answers, most recent on 7/2/2020

  RE: How can i make Movie edit pro plus work faster?
  No they're as in the picture, keeps the dust off, the amps are set about ½ volume, there's no no's on the dial so @ 5 if it went to 10, it's only a small room, 14ft-ish sq n the kitchen attached, with all these 8 speakers i don't need to turn the pc
• Movie Studio

  10 answers, most recent on 4/17/2020

  RE: Can't read magix files
  There was no update. Firewall is turned off.
• Web Designer

  No answers, created on 4/15/2020

  Lost 'Progress' bars [Bottom lower left on screen] when publishiing
  Xara Web Designer Premium 11Windows f8 GBA new problem has surfaced when using my Xara Web Designer.In the past I would 'Save' my work.. then use "Publish Website.." from the pull down 'File' Menu.During the "Publish Website" phase there would be a
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @CubeAce Hi Ray . . . . Deckstar drives. . . . . . I presume you mean Hitachi Deskstar drives, now under the WD brand since 2018? From personal experience over 20+ yrs, the Deskstars were not very reliable in PC's with the frequency of
• Movie Studio

  4 answers, most recent on 4/12/2020

  RE: Can't open project in progress
  @csogkal Unfortunately, I think that specific .mvp project file may be corrupted, hence, it cannot be read. I notice you have another file of the same name, saved about two minutes earlier. Does that open correctly? If so, continue your work in this
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @Scenestealer, @CubeAce Hi Peter, Ray . . . . "Encoder: Hardware QSV" selected as QSV is an Intel iGPU only thing. John did you use the same setting? . . . . . . . . OBS has no impact when running MEP . . . . I do not use OBS for screen recording
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @CubeAce @johnebaker Hi Thanks for checking guys. It must be just my outdated version of Firefox which is all that can run on my outdated OS (Vista) on my general purpose PC. Ray's videos work but then they are linked to YT and John's are not. W10
• Movie Studio

  7 answers, most recent on 4/9/2020

  RE: Magix movie edit pro 2020 record screen with sound?
  Hi thanks, in the levels box, in the recording drop down it's set at stereo mix, I didn't know you got a separate slider for MEP to control but that can't be turned up without turning the main speakers volume up, you can turn it down separately but
• Movie Studio

  7 answers, most recent on 4/9/2020

  Magix movie edit pro 2020 record screen with sound?
  Hi folks, I'm trying to record the screen with the sound, I make YT videos & just wanted to show how i make those videos, a couple of issues i have is when i do record the volume on the PC has to be turned up really high & i get warning msgs
• Movie Studio

  29 answers, most recent on 4/9/2020

  RE: Phantom audio "track" or some audio remnant.
  @FF22 That is indeed strange. Start with what John EB suggested. If that doesn't work, then do as Ray suggested, drag the volume slider for track 1 in the mixer to the bottom to turn it off. John CB Been there, done that. The Mixer has no impact
• Movie Studio

  7 answers, most recent on 4/7/2020

  RE: Is Resizing of 16:9 video to 9:16 practically Posible with Magix?
  @rishal Hi, Your screen shows the Project Settings, not the export settings; you have 9:16 but you didn't change the width to 1080 - you have 1980. You have probably done the same thing upon export. That said, it is against my principles to film
• Movie Studio

  24 answers, most recent on 4/14/2020

  RE: Movie Edit Pro 2016 intant crash on startup
  @Anthony-Andrianos Hi Anthony. I did say 'at least' but it is also possible that you need to re-install the program. First I would really try to get as much free space as you can on your C: drive because re-installs can get messy (Hunting for
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @pmikep Some thoughts on benchmark videos: I don't have the patience to wait for a 15 minute decode, especially since MEP doesn't report the Elapsed Time after the video is done. I tend to agree that Ray's project is not ideal as a standard but
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  Okay, final results: (Update: All with Win10 Graphic Settings set to the UHD for MEP.) Best time was with Nvidia set as Display Monitor, no VFX on GPU =18:16 Then same, but with VFX on GPU =22:18. Slower. So calculating VFX on GPU here made things
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @Scenestealer Hi Peter. Taking your last point first. Both were in use when I got the lowest export times. I've no idea why but with one or the other not ticked the export times were slower. I am now getting even more confused while trying to setup
• Movie Studio

  32 answers, most recent on 4/18/2020

  RE: Magix Freezes / Non-responsive for 1-minute EVERYTIME it's opened!! :@
  I've been using the same version of VPX for the last couple of years without upgrading and have had no slowdown or crashing apart from things I have neglected to do. Saving regularly is important and start up times can vary depending on what else is
• Movie Studio

  4 answers, most recent on 3/29/2020

  RE: Had some early freezes
  @pmikep Hi . . . . This is with no Blue Lightning bolt symbol in the Display Monitor. . . . . At the bottom right of the Preview monitor there is a lightning icon - if it is grey then it is not turned on, then it changes to blue - you need it
• Movie Studio

  28 answers, most recent on 3/28/2020

  RE: Moving/slotting images and transitions in Timeline Mode
  @FF22 Unless you have a simple project with mostly just photos, no music, no overlays (PiP), few titles, do not use Storyboard mode, use Timeline mode. You have to be able to see what you are editing. I have audio and video on separate tracks. I
• Movie Studio

  132 answers, most recent on 8/25/2020

  36 Hours of Testing MEP Premier Settings For Playback and Export.
  Hi all. Prelude. This is going to be lengthy, so please bear with me. You may find it interesting or complete rubbish. First I'd like to say that the moderators here and few regular contributors are very knowledgeable and have helped /are still
• Movie Studio

  31 answers, most recent on 3/29/2020

  RE: MEP System Requirements
  @Scenestealer@Scenestealer @pmikep @LeCanadien Hi Peter. I think it may be the other way around.The box with the tick in it is not greyed out but may be locked in. Why else would I keep getting readings that it is in use? I have found ways and
• Movie Studio

  31 answers, most recent on 3/29/2020

  RE: MEP System Requirements
  @CubeAce, @Scenestealer Hi Ray Ray - it looks like we are talking at cross purposes here - I am referring to exporting, the settings you are looking at are for Preview in arranger if I set this to the RTX 2060 then I do see about 15-17% activity
• Video Pro X

  7 answers, most recent on 3/21/2020

  RE: Viewing top Video camera track. VPX defaulting to show lower track
  @Craigster Hi, No! If you are not in multicam mode you have always seen the object, video or photo, on the highest numbered track that is not turned off. Right. This is what I am saying I have previously experienced and expect to be normal
• Video Pro X

  7 answers, most recent on 3/21/2020

  RE: Viewing top Video camera track. VPX defaulting to show lower track
  @Craigster Hi, No! If you are not in multicam mode you have always seen the object, video or photo, on the highest numbered track that is not turned off. When you go into multicam, the video clips on all tracks except track 1 are turned off. This is
• SOUND FORGE

  10 answers, most recent on 3/17/2020

  RE: Manual Download
  RL - I tried your link and it shows 350 pages versus 216 pages with the link that was emailed to me: http://dl03.magix.net/manual_soundforgeaudiostudio14_en.pdf I get the same results however, blank pages. My OS is Windows 10 and I don't have any