Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

Hi @JohnCB . . . . "Extract sound channels" and "Display sound channels" both do about the same thing. . . . Display sound channels literally does that - it displays all available sound channels, the actual audio is still in the first

Movie Studio

6 answers, most recent on 5/6/2014

RE: Questions about Movie Edit Pro 2014 Plus features

For John about point #3, In MEP2014Plus, "Extract sound channels" and "Display sound channels" both do about the same thing. They put the stereo audio from the video on track 2 and the channels on 3+4, but there is no sound on 3+4. The waveform

Movie Studio

6 answers, most recent on 5/6/2014

RE: Questions about Movie Edit Pro 2014 Plus features

Hi #1 this actually depends on the specification of the computer and the type of video on the timeline - if the computer is not a decent spec quad core with plenty of RAM and the video is HD then this can be a problem - also if the computer

Movie Studio

9 answers, most recent on 5/2/2014

RE: Markers For Frames Have Disappeared in Timeline!!

Hi Sparky, You mean you can't see the images in my post? Here are the Dropbox

Movie Studio

9 answers, most recent on 5/2/2014

RE: Markers For Frames Have Disappeared in Timeline!!

Hi, I see the individual frames and the timeline is in frames as are the markers. Using the left/right cursor arrows moves 1 frame at a time. In the image below, my cursor is at 54s 21 frames. See the image below to change the zoom to 1

Movie Studio

9 answers, most recent on 5/2/2014

Markers For Frames Have Disappeared in Timeline!!

Hello: I have been using MEP since MEP 14 - 2008; in the past, when I zoomed in on the timeline such that I would have about an inch or two between seconds, on the display just above the first track I could see individual frame lines and I could

Movie Studio

4 answers, most recent on 5/1/2014

RE: hit 'create new frame table' by mistake- MEP 2013 Plus

mailboxmoney, For lack of more specific information, I'd suspect you are mixing the display of the audio waveform ('Create wave' form as suggested by Terry) and the default 'flat line' which represents the volume of the audio track. Are you for

Movie Studio

4 answers, most recent on 5/1/2014

RE: hit 'create new frame table' by mistake- MEP 2013 Plus

Hi, Perhaps I've misunderstood? 1. Your MP4 defintely has audio content and plays OK outside MEP? 2. After rebooting your PC, starting MEP 2013 with a fresh project and importing your MP4, you see the audio in track #2? 3. It plays OK, at

Movie Studio

4 answers, most recent on 5/1/2014

hit 'create new frame table' by mistake- MEP 2013 Plus

Hiya- I inadvertently hit create new frame table by mistake when dropping in an mp4 file instead of create waveform display. Now I can't see the visual of the audio for each file (which is sorely needed in my multicam project). I tried to

Music Maker

2 answers, most recent on 4/27/2014

RE: Oxygen-49 keyboard limited use as DAW controller

First, may I say...HOLY COW!!! FINALLY, we have someone who knows the proper way to ask a question! So, thank you 4portswitch! One of the reasons you found little information in this forum on this topic is because either it's never been asked,

Audio Cleaning Lab

7 answers, most recent on 4/22/2014

RE: I cannot make the declipper effect the audio file. I

Hi David, You didn't say which version of ACL you are using. I will assume 2013. There is help in F1 and by clicking on the ? in the declipping tool. See below. I presume that you read this? I agree that it does not help much and it is

Movie Studio

7 answers, most recent on 3/3/2014

RE: 2014 - Unwanted behaviour when displaying 5.1 audio tracks

Peter, Sorry I missed your question back from 23-12-02! I'm on 13.0.2.8 and get my sound channels on tracks 2,3 & 4 with both "Extract sound channels" and "Display sound channels". Only difference is that display shows three waveforms

Music Maker

4 answers, most recent on 3/2/2014

I can't record vocals

I get a message saying "the waveform device 'Microsoft sound mapper' can not record this format" Reason: a device ID has been used that is out if range for your system I have used this program a few months back and had no problems,

Music Maker

5 answers, most recent on 2/25/2014

Crash in magix help. Timestretch + pitch crash

When I put a sample from the file manager (a random audio sample at 128 bpm) and change the pitch of the sample by double clicking on the waveform untill the audio FX rack pops up, I will change the pitch and hit apply and my entire program

Audio Cleaning Lab

4 answers, most recent on 2/4/2014

RE: Missing the beginning of each track

Dropbox link: https://www.dropbox.com/home/Roy?select=ACL12_pic_02.jpg Hi John, If you can see the image, it shows the track marker just before the actual music waveform starts. This is typical of the way I tag tracks before exporting the

Photostory

2 answers, most recent on 12/31/2013

RE: Muting background music during a video clip

Hi, I assume that your music is on track 4. Right click on the track and select "Create waveform" then right click again and select "Volume curve" "Show." You can do the same on your video track to better see where the sound is that you want

Movie Studio

3 answers, most recent on 12/29/2013

RE: Use of .H0 and Magix Sounds .HDP Files with Magix Movie Edit Pro Plus 2013

Hi AFAIK you cannot turn off the creation of the H0 files in Music Edit 3 or Video Cleaning lab - they are needed to display the waveform on the timeline. In MEP you can turn of creation of the waveforms on import - it is in the program

Movie Studio

3 answers, most recent on 12/29/2013

RE: Use of .H0 and Magix Sounds .HDP Files with Magix Movie Edit Pro Plus 2013

Thanks for the answer. The "Movie Information" in "settings" was exact what I was looking for. I do have an additional follow-up question now though that I hope can stop these .HO files from being created. A long time ago I tried a

Movie Studio

6 answers, most recent on 12/31/2013

RE: Video Sound Cleaning Lab - Comparison of old and new 2014 versions

Hi Henk, I have complained to Magix about the backward steps that I have mentioned as well as some problems in 2014 with the draw on waveform method. Drawing on the waveform cannot be done properly once zoomed in vertically. I doubt that

Movie Studio

11 answers, most recent on 1/3/2014

RE: How to get audio from my Canon HFS21 footage

Hi Olivier Also plays fine here on the MEP 2014 timeline, create waveform works OK. I suspect something is amiss with the audio codec. You can download GSpot and analyse the clip with it - GSpot will tell you if the codecs are there and are

Movie Studio

11 answers, most recent on 1/3/2014

RE: How to get audio from my Canon HFS21 footage

Hi Olivier Plays fine here in MEP2014 timeline and shows audio waveform with right click. Looks like something is not set up proerly in Windows. If you click the speaker icon in the windows notification bar, bottom right and click "mixer"

Movie Studio

One answer, on 12/21/2013

RE: Creating A Waveform?

sivadgealec, When you say "...not letting me..." is there an error message or are you just not seeing any result? What version of MEP are you using? In more recent ones there is a right click on object menu entry to put 'Video/Audio on separate

Movie Studio

One answer, on 12/21/2013

Creating A Waveform?

I have been trying to create a waveform so i can cut music and match mix it but it's not letting me create a waveform. It did let me in the Pro x 5 demo version. Any answers?

Movie Studio

3 answers, most recent on 12/29/2013

RE: Use of .H0 and Magix Sounds .HDP Files with Magix Movie Edit Pro Plus 2013

Hi The HDP and H0 files contain the small images you see on the timeline and the audio waveform curve when you display it. If you do not have the option to create audio waveform set in MEP (any version) then the H0 files should not be