• Video Pro X

  38 answers, most recent on 9/7/2023

  RE: H264 Export Frame Rate of 16.67 Possible?
  @AAProds Hi Al, ...it's Super 8 being shot with a camcorder off a screen. This is the second worst method, the worst being off a wall. I have two different video transfer kits. So one up from project on a screen is something like this: Mine is
• Movie Studio

  10 answers, most recent on 7/5/2023

  RE: MEP 2016 Plus - Compatible for Capture With LKX HD Video Camcorder?
  Hi Mike . . . . Do you guys know if MEP2016 Plus will handle the SD Video Files from any of these cameras . . . . The Sony camera records in XAVC S and AVCHD formats which are variations of the h.264/AVC codec and I never had an issue with loading
• Movie Studio

  17 answers, most recent on 6/4/2023

  RE: For the AVI-heads: MMS2023 Bug - incorrect file ratio on import
  @johnebaker Which capture software are you using and does it have a setting for anamorphic pixels? John, VDub or AmarecTV, no, there's no setting apart from the number of pixels ie the actual resolution. Every SD video that exists is anamorphic, ie
• Video Pro X

  80 answers, most recent on 6/3/2023

  RE: Video Pro X and Vegas Pro exports
  Hello Johmebaker ". . . .I shot the project in 1920x1080 I see I should use 15 MBit/s . Do you mean the recorded 1920x1080 bitrate was set to 15MBits/s ?" Honestly my camcorder doesn't tell me the bit rate for recording so I don't know. What I was
• Rescue Your Videotapes!

  17 answers, most recent on 2/14/2024

  RE: Need help setting up
  @PSD Hi. Personally I don't use this program or use video transfer from VHS tape or early camcorders but I do know you need to set Windows to allow both use of the microphone and webcam. What you show in your screenshot is that they are detected
• Movie Studio

  31 answers, most recent on 7/9/2024

  RE: How do I redo an audio track in Movie Studio 2024 Platinum?
  Hi John, Having it at 32 tracks is causing some irritations for me at the moment. I will never need more than 4 tracks and 99% of the time I'll be using a max of 3 tracks. I'll leave it for now to see if it clears up. As for #2 it is hard to explain
• Movie Studio

  31 answers, most recent on 11/22/2022

  RE: Audio Buzzing/Crackling | Please Help
  @CubeAce Hi Ray . . . . assume that drops with volume change as opposed to time passing . . . . Or for the same reason as for video - the less information to encode the higher the compression, now if the thunder was a full orchestra in full swing
• Movie Studio

  69 answers, most recent on 4/9/2024

  RE: VHS captures, video "washed-out"
  @RGBguy, @johnebaker, @AAProds, @CubeAce, @browj2, @Former user, Hi Everyone, I received my StarTech capture dongle and conducted a number of capture tests. The link below provides 2 comparison videos and a MMS2024 backup of my project for anyone
• Movie Studio

  6 answers, most recent on 2/20/2024

  Strange MediaInfo results
  Greetings, Yesterday I added another couple of DV tapes to my computer via firewire for editing. I usually use WinDV for this but I thought I would try MS2024 for the job. It worked without a hitch. Then out of curiosity I thought I'd try Virtualdub
• Movie Studio

  25 answers, most recent on 10/22/2023

  RE: Movie Studio 2023 freezing with 4K input
  As requested profile updated The help/about info gives the program that works as Movie Studio 18 Platinum 18.1.0.24 The files being added are all MP4 files as created by a Panasonic Camcorder. It does not freeze after any particular file. From Media
• Movie Studio

  22 answers, most recent on 1/31/2023

  RE: Dropped sound with imported video files from MiniDV tape
  I have just tried one more thing, which is to download and run WinDV, and have used this to capture same footage off the MiniDV tape via the camcorder. I have the same issue as I encountered with Magix. It seems that WinDV uploads the first eight
• Movie Studio

  22 answers, most recent on 1/31/2023

  Dropped sound with imported video files from MiniDV tape
  I have tried to import a video file from my an old camcorder which used MiniDV tapes using a firewire cable (4 pin camera to 6 pin on firewire pc card). The recorder function in MAGIX Movie Studio 2023 finds the camera okay and is able to control
• Movie Studio

  5 answers, most recent on 1/19/2023

  RE: Camera compatibility with Magix software
  @lindeanlad To answer your second question first, yes, Movie Edit Pro has had a "rebrand" (long and dubious story) and is now named Magix Movie Studio. It is basically the same as the last few versions and you will have no trouble feeling at home
• Movie Studio

  5 answers, most recent on 1/19/2023

  RE: Camera compatibility with Magix software
  @lindeanlad Hi. The camera specs as posted by Al show that the camera only needs to use memory cards that can write to 100MB/s or over which by today's standards is not that high. That means that to get that much information into such a low data
• Video Pro X

  31 answers, most recent on 1/19/2024

  RE: Video Pro X12 - Newblue Elements not working/registered?
  @Clifford-Bowman Hi Cliff. I did say to turn anything within the NB effect that has Bur attached to the slider control to off. And I, for my part, completely ignored that advice. Mea culpa. I'll learn, eventually. There was indeed a "Motion Blur"
• Movie Studio

  31 answers, most recent on 11/22/2022

  RE: Audio Buzzing/Crackling | Please Help
  @Marc-Goder Hi Marc. The audio bit rate change is also a good catch. Something I have never seen before but will assume that drops with volume change as opposed to time passing. It is still being recorded at a constant frame rate
• Movie Studio

  64 answers, most recent on 11/3/2022

  RE: Anyone uploading the 2023 Movie Studio ?
  @browj2 Hi John. Yes it has been my nighttime shooting, but the lack of noise levels has improved since I dropped the frame rate for lower light situations. Then it is just a matter of keeping the camera steadier. Motion blur from subjects in frame
• Movie Studio

  31 answers, most recent on 11/22/2022

  RE: Audio Buzzing/Crackling | Please Help
  @johnebaker Hi John. Or for the same reason as for video - the less information to encode the higher the compression, now if the thunder was a full orchestra in full swing the bitrate it could be very different. You could be right. AAC is far more
• Movie Studio

  31 answers, most recent on 11/22/2022

  RE: Audio Buzzing/Crackling | Please Help
  @Marc-Goder Hi Marc. The audio bit rate change is also a good catch. Something I have never seen before but will assume that drops with volume change as opposed to time passing. It is still being recorded at a constant frame rate
• Other products

  No answers, created on 8/29/2022

  Importing from a DV Recorder
  Hello, I am looking to purchase a product which can enable a connection to a firewire card to import video from a Canon DV camcorder. Can you tell me which of your current software products would do so? Thanks<Ken Lee
• Movie Studio

  11 answers, most recent on 8/18/2022

  RE: How come Magix won't allow me to record video from my video camera?
  @johnebaker Hi John. Yes, I should have said I was referring to using a DSLR as an alternative to live recording within MEP using DigiCamControl to get a video feed. Is it the sensor size or amount of photo-sites that makes a difference between heat
• Video Pro X

  61 answers, most recent on 1/31/2023

  RE: Exported video not matching up with finished edit producted
  @Reyfox My copy of the Original Cubase VST had much tighter MIDI control and still handled multiple audio tracks and soft synths on a 23 bit operating system, but that was in a time when the programs were built better and not compiled on code upon
• Movie Studio

  41 answers, most recent on 6/20/2023

  VHS made into DVD
  Thinking on Magix Studio 2023 or higher versions... My video VHS was copied using a normal VHS to DVD recorder. lt was very old and the copy of DVD not too good. What product will help me make this DVD copy into a better Viewable Movie to a new DVD
• Movie Studio

  64 answers, most recent on 11/3/2022

  RE: Anyone uploading the 2023 Movie Studio ?
  @AAProds @emmrecs Greetings both (and indeed anyone else with an opinion), Around this time of year I treat myself to a little something for me, no-one else just me. Being the extravagant person I am I'm toying with upgrading to MS 2023 OR buying