• Movie Studio

  10 answers, most recent on 3/5/2022

  RE: Program Requires Extra Component - MPEG2 Codec MainConcept
  @CarpentersMate Hi Mike . . . .  HD 1080 from the P2 Flash Card . . . . Most likely DVCPro encoding - if the files on the SD card are a known format, eg AVI, MOV, etc MediaInfo will tell you what the codec is. Do be aware there is a second
• Movie Studio

  11 answers, most recent on 2/26/2022

  RE: MKV FILES
  @Chris-Chambers Hi From the encoder ID that would suggest the 'OBS MAYBE' is an OBS recording, the V-MPEG4 (AVI-MPEG4 ?) codec is not supported by Movie Edit Pro (MEP). In the case of the existing recording, if it cannot be redone then I agree with
• Movie Studio

  21 answers, most recent on 2/23/2022

  RE: Am I using MXV files incorrectly.
  @Former user Hi Gid. I was experimenting with export formats to see if there were any advantages to any of them. The export to mxv for my 41 minutes of files only took just over an hour so not actually a lot longer than for some other formats on my
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
   Hi, the M8RA codec must have come with MagicYUV because as far as i'm aware i haven't consciously installed K-Lite CODEC pack, & sorry the mention of ,mov in my comments was a mistake, i was getting a bit mixed up trying to work & play on
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @Former user Hi, I tried the AVI file and it asks to install the CODEC M8RA which is available in the K-Lite CODEC pack. I don't particularly want to install the K-Lite pack as John EB has advised against it in the past. As for the MOV file that you
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @johnebaker YUVA 4:4:4:4 doesn't have the A for Alpha at the end, This is what i rendered it with from Vegas, MagicYUV 8-bit RGBA, This is that file that @CubeAce couldn't load or play in VLC, but i can GeneralComplete name                        
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @CubeAce, @Former user Hi . . . . I don't know why i can play that .mov file in MEP & VLC but you can't, I have a lot of plugins but the only thing i can assume is it's the MagicYUV that i got to run in Vegas . . . . In the case of the video
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @Former user Hi Gid. I'm not sure VPX or MEP could use any codec from another program. Some codecs are not readily distributed across programs or perhaps the folder paths or ability for the program to recognise them as codecs is an issue. Some
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @CubeAce 👍 yeah i think i was being a bit lazy & i was supposed to be working, so creating a transparent avi seemed easier, but...😂🤦‍♂️ If you want anything else, if i can i'll see what i can do 👍 MagicYUV shows in MEP, that'll be why i could
• Movie Studio

  13 answers, most recent on 2/11/2022

  RE: Crashes for burning 23.976, Audio support, options not saved...
  The conversion from PAL to NTSC 23.976 can be done in just one pass using VirtualDub2, and the result was a playable AVI file. I always use Lagarith for intermediate steps to avoid multiple reconversions between lossy codecs, as fixing old movies
• Movie Studio

  13 answers, most recent on 2/11/2022

  RE: Crashes for burning 23.976, Audio support, options not saved...
  @clement5 Hi. I am completely confused by some of your above statements and inaccuracies not to mention your complete lack of your system details of every post you put up. One at least on one occasion you have been asked for your computer
• Movie Studio

  27 answers, most recent on 1/29/2022

  RE: Aspect Ratio and Movie name problems
  I am familiar with the fact that the DVD resolutions are designed to approximate the old TV standards. Of course 720 horizontal on NTSC DVDs is just one of several resolutions often used such as 704 or 640 (square pixels)... The number of pixels is
• Movie Studio

  27 answers, most recent on 1/29/2022

  RE: Aspect Ratio and Movie name problems
  @clement5 Hi Thanks for the video clips. The immediate discrepancy is that the Test PAL AVI 4:3 is not 4:3 AR it is 5:4. MEP picks it up as 4:3 - this would account for the sidebars in a 4:3 AR project The MediaInfo data is (I have removed the
• Movie Studio

  27 answers, most recent on 1/29/2022

  RE: Aspect Ratio and Movie name problems
  As to the Movie name, they hid the drop down menu very well. Hovering over the menu did not give a clue that it was a dropdown as it just looks like information. They should have the standard triangle or arrow pointing down. Magix is good at hiding
• Movie Studio

  27 answers, most recent on 1/29/2022

  RE: Aspect Ratio and Movie name problems
  @clement5 @johnebaker There seems to be something odd going on here with MEP 2022 (on my other computer). MEP2021 seems to import a 720x576 5:4 video into a 4:3 movie correctly: Whereas MEP 2022 doesn't import it correctly. When "Movie Size" is
• Video Pro X

  7 answers, most recent on 1/5/2022

  RE: VPX program monitor is blank when full screen - Solved
  Hi John, Thanks for the prompt reply. All the drivers are up-to-date. I started the project in Camtasia studio and decided to move it to VPX. I had to convert the TSC files and they show as AVI now. I recorded at 4K although the actual capture
• Movie Studio

  25 answers, most recent on 12/28/2021

  RE: Quick Time Movie Export (Advanced) Not Working
  Hi Ray - Hi John Ray you mentioned:"Apple products became more of a status symbol, they went back to their old practices of producing new codecs and no PC support by Dropping QuickTime for Windows". Sadly I agree (although I still enjoy the 'old'
• Movie Studio

  17 answers, most recent on 12/24/2021

  RE: MEP 2016 Plus Captured AVI Files - Codecs
  @CarpentersMate Hi Mike. Seasons Greetings. I think maybe because avi did not support different aspect ratios and was a Microsoft developed codec. I think you would expect that response from an Apple tech department. I would not personally worry
• Movie Studio

  17 answers, most recent on 12/24/2021

  RE: MEP 2016 Plus Captured AVI Files - Codecs
  Hi John Thanx for taking time out to comment (since its Holiday) I'm afraid to say it ... here goes: I started using FCP 6.0.6 in 2009 (upgraded from a previous version). No 'sharpen tool'. Working mainly with SD and mechanically maintaining #2 G5's
• Movie Studio

  17 answers, most recent on 12/24/2021

  RE: MEP 2016 Plus Captured AVI Files - Codecs
  @CarpentersMate Hi Mike. Is there anyway to check the codec of a captured AVI file? Yes, download and install MediaInfo. This tutorial will show you how to use the app if you're not sure about this. HTH Jeff
• Movie Studio

  14 answers, most recent on 12/14/2021

  RE: I Purchased Movie Studio 18 but actually received Movie Studio 2022
  About the version issue of the software, I do not want to go back to 18 because we will purchase some new licenses for new coworkers and I do not want to have some of them with the 18 and some of the others with the 2022... I guess I will contact
• Other products

  28 answers, most recent on 12/19/2021

  RE: Windows Software to import Video with a Canopus ADVC110
  @johnebaker what sort of frame rates do you get on your exports when NV is used? You know the story of the hare and the tortoise... Except that, in this case, Ray's hare really does win the race! My system chugs along at around 5 frames per second
• Movie Studio

  42 answers, most recent on 11/21/2021

  RE: Capturing Mini DV: Is it possible to adjust the output file type ?
  Alwyn where are you? Are you ready for a Chicken Dinner?  Had a lamb roast last night and just got up! 😉 "Muxing" is short for Multiplexing, where the video stream and audio stream are joined together to form the final file. The opposite is
• Movie Studio

  42 answers, most recent on 11/21/2021

  RE: Capturing Mini DV: Is it possible to adjust the output file type ?
  Hello Ray and Thank You Yes there's something wrong with the MPEG-2 Export. I think its the codec or incorrect export settings using MEP2013. I doubt its an infection (just the wrong export), or lack of ability using 2013? I'm sure that can be fixed