• SOUND FORGE

  3 answers, most recent on 1/31/2021

  [Solved] Recording too fast
  Hi, After an update from windows, Sound Forge Pro 12 - the pace and pitch of my recordings has been sped up. I always record at 48000, 16 bit, mono - I record the voice file and as I play it back it is pitched higher and plays faster - I haven't
• Music Maker

  2 answers, most recent on 6/15/2020

  [Solved] Why can I only hear the left channel of my micro?
  I made a song in Music Maker and now I want to add the vocals. I created an audio track (configurated it as a mono track) for the vocals and I use a Rode micro that I connect to my Focusrite 4|4 Scarlett audio interface. I can hear my voice loud and
• SOUND FORGE

  One answer, on 5/17/2018

  RE: [Solved] How to master a audiobook in sound Fourge 12.5
  Typically, if the voice was well recorded, conservative amounts of EQ, compression and peak limiting are typically used. Try some of the presets which may provide starting point for your particular project. If you post a clip, you likely get more
• Movie Studio

  10 answers, most recent on 3/10/2017

  RE: [Solved] Audio recording truncated - Object length is limited by range markers?
  Hi, Thanks for bringing this one up. I have run into this problem many times and my solution was to copy everything into a new movie (delete the first one) and continue. Not a good solution. I tried your tests in VPX(8) and confirm that there are
• Movie Studio

  One answer, on 3/7/2008

  RE: [Solved] ADD MY COMMENT TO THE VIDEO
  If you want to add audio commentary/voice-overs to your project in Video Deluxe, you can do that via the recording button (part of the transport control buttons underneath the preview monitor when using the standard layout). One of the options you
• Movie Studio

  31 answers, most recent on 6/27/2024

  RE: Where did my audio go?
  I thought it may also help in some way for you guys to know what I am trying to do with YT. To be brief:I was an audio print journalist for 4 years (2013- 2018). I started out writing for a forum trying to be the voice of reason in the sea of
• Movie Studio

  4 answers, most recent on 5/30/2023

  Unable to change audio channels on duplicate videos, uses the same one
  I recorded a test video using OBS with 2 channels, I made some settings there to record the game audio on channel 1 and my voice on channel 2. I put the video into Movie Studio 2023 but it won't separate both channels, only only one of them. I can
• Audio Cleaning Lab

  2 answers, most recent on 7/13/2023

  RE: Sound Forge Audio Cleaning Lab 4
  @Tony-Haack Hi Tony, I agree with @SP. Please take note of the bugs that I have sent in to Magix: And note my comments about Voice Over in this thread. I am about to raise this issue with Magix as I think it's a bug. That said, the program does
• Movie Studio

  23 answers, most recent on 6/14/2023

  RE: Editing audio on the timeline
  @Tony-Haack Hi Tony, To reinforce what the other have said, look at the image below. This is part of the timeline for a tutorial. My original narration is on track 6. Note that it is in many pieces, most are trimmed, moved, some redone and
• SOUND FORGE

  10 answers, most recent on 4/26/2023

  RE: Lost ability to monitor recorded sound in SF 13
  I have also lost the ability to monitor (listen to) what I am recording. Sound Forge will no longer send what I am recording through my sound interface's speakers/headphone jack.  The VU meters don't activate while I am attempting to record
• Audio Cleaning Lab

  16 answers, most recent on 3/13/2025

  RE: Family History Cassette Tape Project - Tips to Begin?
  @SP. and @browj2 - Many thanks for your replies. I do indeed get the 101 error. I tried using the 32-bit version instead, but then when running Auto Cleaning and some other functions I received new error messages that I suspect were memory related.
• Movie Studio

  31 answers, most recent on 6/27/2024

  RE: Where did my audio go?
  @Eric-Elliott Hi Eric . . . .  I can't do voiceover separately and then try to sync it up, that is impossible. I need to do it while the image or video is on screen otherwise I'm talking about apples while oranges are showing. . . . . . A change of
• Movie Studio

  9 answers, most recent on 2/24/2023

  RE: How to edit a track in details
  @CubeAce Hi Ray, The OP is recording new material, Voice Over, not dropping loops in. The OP has to record the translation to match the other language and also have it work with the video. The translation has to match the action. A French version
• Movie Studio

  23 answers, most recent on 6/14/2023

  RE: Editing audio on the timeline
  @Tony-Haack Hi As @emmrecs has commented - 'You achieve this by cutting the audio both sides of your "mistake" and then deleting the unwanted portion. Then you do have a lot of separate objects.' Below is the timeline for my Mixer tutorial here - as
• Movie Studio

  39 answers, most recent on 8/12/2023

  RE: Movie Studio - Audio and Music Editor 3
  @Tony-Haack Hi Tony. I have now tried this out for myself. There was no need to change any settings in the Microsoft Mixer. I did not get any echo or repeated audio from my microphone and could set the video volume to whatever level I needed to hear
• Audio Cleaning Lab

  16 answers, most recent on 3/13/2025

  RE: Family History Cassette Tape Project - Tips to Begin?
  John - Hope you are doing well. It was a busy weekend here - lots of granddaughter time. VideoThanks for your comments on Magix Video. I will keep it in mind when I move on to my video tapes. Your point about multiple moves is a great one. Folks
• Music Maker

  6 answers, most recent on 2/22/2023

  The recorded Audio is not working as it should after i Exported
  Hi! After the last song I made im getting this extremly annoying problem everytime I mix it down and export it. It has always worked smoothly with and without any singing recorded. But now it doesnt work anymore. When im happy with the song, I
• Movie Studio

  26 answers, most recent on 6/29/2023

  RE: Editing single channel sound (2 tracks) using Sterio
  @Tony-Haack @CubeAce Hi Ray, Try exporting the result and see what happens. Both Tony and myself ended up with the voices panned hard left and right despite what was heard while running the project. If you get a different result please share as I
• Movie Studio

  31 answers, most recent on 11/22/2022

  RE: Audio Buzzing/Crackling | Please Help
  @CubeAce @johnebaker @Marc-Goder If i drop an MP3 or record my voice inside the editing software, it sounds clean. it seems to only be videos that i drop in there that sound horrible
• Movie Studio

  39 answers, most recent on 8/12/2023

  RE: Movie Studio - Audio and Music Editor 3
  @browj2 Hi John. There are differences in the required distances for a given sound depending on the microphone used and what the microphone was primarily designed for as well as the acoustic surroundings. Regardless of using a luffs meter or not I
• Movie Studio

  14 answers, most recent on 2/21/2024

  RE: Preloading slow, wave display does not match audio /Movie Studio 2023
  Hi John. Thank you for your answer. . . . . . the wave form display does not match audio anymore . . . .Do you mean the audio does not match the lip movements, ie it goes out of synchronisation? The audio is an extra video that has been recorded
• Movie Studio

  31 answers, most recent on 7/26/2023

  RE: Capture-Transfer HD Video Into MEP2016 Plus
  Hello testataan (nice to see you again). And thanx for ALL your help. Yes you were the 1st person to mention the strange 'Headphone Journey' (which acts a prompt to bring up some techincal adjustments that would have been impossible to find). I've
• Video Pro X

  46 answers, most recent on 5/14/2025

  RE: VPX16 plays Sony XAVC with no sound
  @Can-Dive , @AAProds I hope this is the right list. Audio:   0x0000    unknown    -0x0001    PCM    Microsoft0x0002    ADPCM    Microsoft0x0003    IEEE FLOAT    Microsoft IEEE7540x0004    VSELP    Compaq Computer Corp.0x0005    IBM CVSD    IBM
• SOUND FORGE

  7 answers, most recent on 1/24/2023

  RE: Effective noise reduction
  @Vinayak-Raghuvamshi I would very much endorse what @SP. has written. Having listened to a few minutes of that recording by far your "biggest problem" is that you have very much overused the Noise Reduction facility! IOW, you have applied far too