Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

I have installed Magix Video easy Rescue version 6.0.2.31 using a video converter Magix model K0065 (USB) The serial number Removed by Moderator The system is running on ASUS TPL300L on Win 8.1 Trying to import from analog resource when following

Rescue Your Videotapes!

5 answers, most recent on 5/2/2021

Video picture flickers

Dear tech support, I have Rescue Your Videotapes - version 7. Over the last 3 months I have not been able to successfully convert any videos whether VHS, Hi8 or DVD due to a technical issue that has risen up and that is I get flickering of the

Movie Studio

No answers, created on 1/7/2021

Capture using DV Pass-through - Unable to disable auto "record pause"

When using a DV camera in pass-through to capture the cameras analog inputs, when you start the recording in Movie Edit Pro (MEP) it puts the camera in Pause even with "Start the DV Device automatically" un-checked. Using pass-through means the

Rescue Your Videotapes!

2 answers, most recent on 11/15/2020

RE: Program does not see my old VHS player VERSION 3.0.1.25

Hi John It's a different machine to 2012 posts. The software has been installed for some time on this machine but I had not used it. TBH I cannot remember if I have used it to record analog video since it was installed on this kit. It is, as I said,

Rescue Your Videotapes!

2 answers, most recent on 11/15/2020

Program does not see my old VHS player VERSION 3.0.1.25

I'm trying to run version VERSION 3.0.1.25 PC is running W10 with all updates applied. The VHS machine is connected to a USB port scart to 3 plugs via the red and white adapter. When I go to try and play something through the video machine the

Movie Studio

3 answers, most recent on 11/3/2020

RE: Analogic recording stops continuously and regularly after some seconds

@esaollikainen It could poor quality video tape, which causes your capture device to hiccup, thinking there is no video signal. A couple of things to look at: - Does it occur with other tapes? If not, it indicates that that tape is dodgy. If it

Movie Studio

3 answers, most recent on 11/3/2020

Analogic recording stops continuously and regularly after some seconds

Hi, I am using MovieEdit Pro 2016 Premium (15.0.0.(UDP3). I installed it just some weeks ago and at the same time I had to instal the driver for the red Magix - connector. Because I earlier used Magix Movies on DVD7. When I record VHS-video, the

Rescue Your Videotapes!

No answers, created on 10/26/2020

Impossible de numériser une VHS

Bonjour, je n'arrive pas a numériser mes cassettes VHS, d'une part j'ai changer mon adaptateur peritel en croyant que celui fournit était défectueux mais toujours le même résultat, j'ai l'écran de prévisualisation du projet qui est noir, et quand

Video Easy

5 answers, most recent on 10/25/2020

RE: Hello, I have a sony DCR-PC103E and want to transfer my videos to DVD.

@Erik-Geenen Hi Does Video Easy see the Roxio or Silvercrest grabbers when you select the Import from analog option? If the devices are not seen then they may not have 64 bit drivers installed. The Silvercrest drivers are here. Drivers for the Roxio

Video Easy

5 answers, most recent on 10/25/2020

RE: Hello, I have a sony DCR-PC103E and want to transfer my videos to DVD.

@Erik-Geenen Hi and welcome to the foum . . . . I connected my camera via the I-link. . . . . Are you connecting the camera to a Firewire input on the computer? If so the camera does not support DV output over iLink/Firewire. In Video Easy, if you

Movie Studio

12 answers, most recent on 10/21/2020

RE: Massive Bug Report - Movie Edit Pro Premium 2021 just installed

@Eelke-Schokker Bad analogy, it's like asking the car to go left and right at the same time, can't be done. It's not a design flaw, that is how it's designed. If you don't like it, raise it with Magix. Most users have two or more video clips, so

Rescue Your Videotapes!

23 answers, most recent on 10/14/2020

RE: Magix Rescue Your Video Tapes doesn't recognise VCR

@KAL00 Hi . . . . Tried the analog option without success but will try again with the linked driver you provided. . . . II assume you have the Stereo AV cables with a 3 ring and tip (4 pole) 3.5mm jack connector on one end and Yellow/Red/White RCA

Rescue Your Videotapes!

23 answers, most recent on 10/14/2020

RE: Magix Rescue Your Video Tapes doesn't recognise VCR

Thank you johnebaker I’ll try that one. I’ll only be using it for normal video cassette tapes it appears. I downloaded the RYVT from Magix site. Im trying to record tapes from a Sony DCR-TRV460E Hi8/8mm and also tapes from a Canon MD160 MiniDV.

Rescue Your Videotapes!

23 answers, most recent on 10/14/2020

RE: Magix Rescue Your Video Tapes doesn't recognise VCR

@KAL00 Hi . . . . the correct driver please . . . . The K0065 driver you need is this one although this is the K0067 driver it is the correct one for the K0065 on Windows 10. . . . . I have been attempting to attach camcorders unsuccessful as it

Movie Studio

6 answers, most recent on 10/3/2020

RE: Video & audio recording (Version 20.0.1.65) Premium version

@Cal Just remembered that I wanted to comment on this. Busy week. There is a misconception by many people as to how recording using a video editor actually works. As far as I know, no video editor or even a DAW, records into itself, directly onto

Movie Studio

3 answers, most recent on 10/2/2020

Why my 1-hour recorded video showing in "Projects" as a single frame?

Why is my 1-hour recorded analog video presenting as a "single frame" in the "Edit" section of my program??

Rescue Your Videotapes!

No answers, created on 9/19/2020

I can not import analogic videos in w7

Hello, I have a terratec grabby device. Ihave installed the drivers and MAGIC VIDEO EASY software. When I select the analogic video input, there is not any device to be selected. I have Windows 7 and in the Control Panel there is not any device in

Rescue Your Videotapes!

One answer, on 9/14/2020

[Closed] Unable to use 3rd party Analog for video capture in Windows 10

I have three 3rd party USB analog digitizers that Vegas Movie Studio Planinum 9.0 can view but says it cannot open the device. One is Roxio Video Capture USB, Pinnacle USB, WinTV from Hauppauge. The Vegas Movie Studio Planinum 9.0 sees them all when

Movie Studio

8 answers, most recent on 9/9/2020

RE: crashing after update

@torrey-lafrance Just to make sure, is your recording source Analog? Please post a screen shot of the Video Recording screen showing the parameters. John CB

Movie Studio

33 answers, most recent on 11/10/2021

RE: Update 20.0.1.65

@martin-brennan Hi . . . . you're blaming me for updating? . . . . No - I said you had the option and had chosen. . . . . Magix know exactly what my hardware is - they have ALL of those details on my acct. why target me with updates that i can't

Other products

One answer, on 8/7/2020

[Closed] Failing Vidcap60.exe & Movie Studio Platinum 15

Hello, When I run vidcap60.exe using windows video driver, the preview window functions normally. When I run the most recent NVIDIA video driver for my GTX 1050 the preview remains flicks to black before during and after the DV capture. Oddly, the

Movie Studio

19 answers, most recent on 8/26/2020

VHS to digital via Firewire problem; MEP 2015

I have a problem with capturing VHS tapes to MEP 2015 via Firewire. I have installed the Legacy Firewire driver for my WIN 10 desktop computer, and have used my Canon Elura 60 camcorder to capture the tapes made with the camcorder with MEP, with no

ACID

One answer, on 7/10/2020

RE: Automate (create envelope for) an effect plugin.

Hi @obieephyhm there's a couple ways I think you can do this automate the wet/dry of the effect on the channel - this only works if the plugins you're using have a wet/dry option. Not too many plugins do. Also, if you have all the effects in the

Movie Studio

23 answers, most recent on 7/6/2020

RE: VHS Transfer and Editing Inquiry

@hdrechsel18 @emmrecs seriously consider whether it would be worth you investing in something like one of the Canopus (Grass Valley) range of hardware analogue to digital video convertors. This will allow you to convert the analogue footage from the