• Music Maker

  3 answers, most recent on 2/6/2018

  RE: Error when recalling saved Projects
   How do files become corrupted? I suspect that if any of us knew the answer to that question we might make a fortune by providing a "fail-safe" method of avoiding such corruption! In all honesty, it is impossible to say why any particular file
• SOUND FORGE

  44 answers, most recent on 2/5/2018

  RE: [Closed] SOUND FORGE – What features do you want us to develop?
  Here's what I'd suggested earlier in the old Sony forum (with maybe a few slight modifications): Allow deactivating - maybe I move from computer to computer more often than others, but I seem to always be running up against the limit on my
• Other products

  2 answers, most recent on 1/27/2018

  Why is sound level diff when video is burned to hard-drive vs blu-ray?
  I burned a video I made to my internal hard-drive and also burned the same video to a blu-ray disc. The voice soundtrack came out the same on each - the volume level was the same. But the music soundtrack - was much lower/quieter when I played the
• Movie Studio

  7 answers, most recent on 1/26/2018

  RE: Blu Ray DVD Freezing in same spot when played back.
  Hi. Welcome to the Magix forums. Your post is a little confusing because you speak of a "Blu-ray DVD". Blu-ray and DVD are two quite different things but it is clear from the rest of what you write that this is indeed a Blu-ray disc. Clearly, MEP
• Movie Studio

  7 answers, most recent on 1/24/2018

  RE: Burning to Blu-Ray
  Hi When you use the Image recorder and ISO file will be created in the location you specified in the Burn dialog, also in the Disc Images folder - you may need to locate this depending on whether you are using the default files and folder locations
• Movie Studio

  7 answers, most recent on 1/24/2018

  Burning to Blu-Ray
  I've been away from MEP (Plus) since MEP MX Plus; and because I'm currently constrained by 32 bit hardware, I have just upgraded to MEP2014.  I have an external Blu-Ray drive (ASUS SBC-06D2X-U), and I am able to select that device in the burn
• Video Pro X

  14 answers, most recent on 3/12/2018

  RE: Magix pro x9 is the worst version ever !!!
  Hello everybody..I'm an old magix user.I'm using the magix editors since 2006.And I never used it unlicensed !!! In every version I used I allways had problems with it.And I know how to use this software better than many of others.Right now I'm
• ACID

  No answers, created on 1/6/2018

  Registration problem
  I have a new hard disc(old broken) and I canot register Acid 7.0 (2015) ,when I tried to register writes : wrong serial number but its not wrong serial number I have original CD ACID Pro 7.O Serial number and optional Authentical Code or writes
• Movie Studio

  4 answers, most recent on 12/25/2017

  RE: Re-edit after save and burn.
  Hi . . . . not sure how to re- encode all on the edited version . . . . This is done when you burn the edited version to disc again. When the message above appears, check the 2 Rewrite options, and click Encode all. The burn will then re-encode
• Video Pro X

  180 answers, most recent on 12/12/2017

  RE: CANNOT EXPORT MOVIE
  Every single file and folder that you are using and have included in the project should be in your master folder for the project. If you have added files to the project in the last few days, they should have first been dragged and dropped into you
• Video Pro X

  5 answers, most recent on 11/24/2017

  RE: rendered video stuttering - backward and forward, not skipping
  Firefox died as I was finishing a lengthy reply. 😭 I appreciate the help. I saw that post you linked to and thought I did my best, but I appreciate the additional pointers - particularly the Mediainfo app. I did check the Help and Manual PDF and
• Video Pro X

  30 answers, most recent on 11/21/2017

  RE: Comments on November 2017 update to VPX, improvements or problems
  @RogerGunkel Hi . . . . I've just tried to write a 1hr 57min dvd, something I have done many times over the years, however with VPX after the new update I am getting the same problem that I had before the update. The programme should resize the
• Video Pro X

  30 answers, most recent on 11/21/2017

  RE: Comments on November 2017 update to VPX, improvements or problems
  @RogerGunkel Hi . . . . I've just tried to write a 1hr 57min dvd, something I have done many times over the years, however with VPX after the new update I am getting the same problem that I had before the update. The programme should resize the file
• Video Pro X

  180 answers, most recent on 12/12/2017

  RE: CANNOT EXPORT MOVIE
  4k Bluray writers start at about £150 and you cannot use standard Bluray discs you will need Bluray M depending on the writer. You will also need to be absolutely certain that the disc you write is compatible with the playback system, which will
• Video Pro X

  7 answers, most recent on 10/28/2017

  RE: VPX suddenly showing dvd writing problem
  Hi John, Thanks for joining in. Just to be clear, I have made 3 separate attempts to produce a DVD using the identical MP4 files in each project. The first file as you can see from my last post was 4.66Gb which is too big as you correctly say for
• Video Pro X

  7 answers, most recent on 10/28/2017

  RE: VPX suddenly showing dvd writing problem
  Hi again Roger. Looking at your screenshots I noticed you use DVD+R (at least you do according to the burn screen). I only ever use DVD-R and always burn to Disc Image so don't normally see that part of the screen. As an experiment I loaded a recent
• Video Pro X

  7 answers, most recent on 10/28/2017

  RE: VPX suddenly showing dvd writing problem
  Hi Roger. I've never seen this happen in quite the way you describe, either. If a project is too large for a standard disc I would expect to see a warning message pop up on the initial burn screen, not tell you just before the actual burn to disc is
• Movie Studio

  18 answers, most recent on 9/5/2017

  RE: AHER (another hardware encoding rant)
  Hi, welcome to the Magix forums. There are far more knowledgeable experts than me on this forum but I can quite categorically say that on my computer, running the (slower) AMD GPU than you mentioned, an AMD R7 360, along with the Intel HD 530
• Movie Studio

  18 answers, most recent on 9/5/2017

  RE: AHER (another hardware encoding rant)
  @petermg If the processor is at least a 4th generation or later Intel i5 or i7 series then HWA is possible using the Intel GPU. However, with an AMD processor, then there is no capability to use HWA, unless the GTX 980 is replaced with a model that
• Music Maker

  5 answers, most recent on 6/28/2017

  RE: Burning a CD
  Hi . . . . Windows 10 . . . CD-Rom drive is CRX230ED ATA Device . . . . This drive was first released in 2007 and is 'old' compared to newer drives. I suspect that you are having either: an incompatibility issue with Windows 10 as in my case with
• Photostory

  19 answers, most recent on 12/31/2018

  RE: burning DVD - not recognized by DVD player
  Thank you Jeff, - My local fixed harddrive (model WDC WD10JPVX-22JC3T0) has a 931GB capacity, and my free space is 308 GB. I also have an external Verbatim drive, which is where the pictures, videos, photostory file and iso file are stored. This is
• Photostory

  19 answers, most recent on 12/31/2018

  RE: burning DVD - not recognized by DVD player
  Hi again. Many thanks for such a comprehensive reply; I wish all posters here were as thorough! There's nothing in your specs to suggest any obvious reason for your problems. However, it would be useful to know the size and type of your harddrive
• Music Maker

  4 answers, most recent on 6/14/2017

  RE: USB controller pad delay/keyboard delay
  My computer is new, bought it in January this year .......  Thanks for the extra information; unfortunately, it is not everything we need! That your computer is new may be a good thing (in the context of your problems) but, whatever its age we need
• Movie Studio

  32 answers, most recent on 5/25/2017

  RE: De-interlacing Question
  Hi Thanks for the answer . . . . The two copies I made straight to a disc. The first one I exported as progressive and the second one I left interlaced. . . . . However that does not give us enough detail on what options you selected, which codec,