• Movie Studio

  10 answers, most recent on 9/13/2015

  RE: DVD & Bluray Burn issues in MEP 2015
  I replaced my Bluray writer with a brand new LG writer a few days ago. It does recognize the dual layer disk right at the start & adept the bit rate better than it did with the old writer (although not optimal).  However, when you click
• Movie Studio

  10 answers, most recent on 9/13/2015

  RE: DVD & Bluray Burn issues in MEP 2015
  Jeff:  I have tried using imgburn to burn my image.  In fact, that's always my first routine so I have the image on a backup drive.  For this exercise, I've tried an .iso burn, a folder burn, and direct to disk with no luck getting an operable
• Movie Studio

  One answer, on 8/21/2015

  Why won't Movie Edit Pro 16 recognize LG Portable DVD Writer on a windows 10 device
  After installing Movie Edit Pro 16 on my new Windows 10 Toshiba Radius, I could not get it to recognize the LG Portable DVD writer so I can burn a DVD with a movie I made.
• Movie Studio

  One answer, on 8/1/2015

  RE: I bought an LG slim blu ray writer I was successful with the first burn, but since then I always get a message that the drive is not fully supported. I dont know why it did it once and now will not. Any alternatives?
  Hi Without more information I am guessing that the LG BD drive is an external USB device - and possibly you are using a laptop? If the LG drive is USB, then the most likely cause of the problem is the Windows USB power management turning off
• Movie Studio

  One answer, on 8/1/2015

  I bought an LG slim blu ray writer I was successful with the first burn, but since then I always get a message that the drive is not fully supported. I dont know why it did it once and now will not. Any alternatives?
   AVSDK Message - ERROR: :Cannot write to disc -> Power on, reset, or bus device reset occurred, possibly caused by malfunction of host adapter or drive (SK/ASC/ASCQ 06/29/00) 8/1/2015 12:31:40 PM.446:   AVSDK Message - ERROR: :Cannot write or
• Movie Studio

  2 answers, most recent on 8/21/2015

  RE: MP4 Import Cannot Read File
  You probably have a compatabillity issue, also ensure the files are not read only, look at their properties in windows and untick read only if it is ticked. But I would say you have bigger problems, and to cut this short, you may need to use a
• Movie Studio

  2 answers, most recent on 8/21/2015

  MP4 Import Cannot Read File
  I cannot import MP4 files, "The file format of.....cannot be read. These are videos from my LG 3G and my wifes iPhone 4s. I know the MP4 codec is activated, because I can export MP4 files.  I am using Movie Edit Pro 15 version 8.6.1.0 (C1),
• Movie Studio

  13 answers, most recent on 2/25/2015

  RE: Importing a button into Moviemaker
  Hi Terrypin I have fianlly got round to trying out you suggestion, however my package is missing one of the boxes that you have on yours, in fact it looks as if it is missing a few! I can only access this screen if I highlight a button (not a
• Movie Studio

  17 answers, most recent on 5/13/2019

  RE: [Closed] Problems exporting to MPEG-4 MP4 in MEP 2015 Plus
  So, pics show the error, and the unfamiliar MPEG-4 (Advanced) screen.  I take it back, I guess it is the H.264 screen, though it seems simpler than the one I knew from MEP 2013.  I've tried re-installing a bunch of codecs, including the K-Lite
• Movie Studio

  17 answers, most recent on 5/13/2019

  RE: [Closed] Problems exporting to MPEG-4 MP4 in MEP 2015 Plus
  So, pics show the error, and the unfamiliar MPEG-4 (Advanced) screen.  I take it back, I guess it is the H.264 screen, though it seems simpler than the one I knew from MEP 2013.  I've tried re-installing a bunch of codecs, including the K-Lite
• Movie Studio

  13 answers, most recent on 1/15/2015

  RE: finished project pixalated menu
  yes i just clicked on the image and it doesnt show you the full image, ive uploaded them again to this
• Off topic

  7 answers, most recent on 12/24/2014

  RE: Building a new computer for music and video
  Hi That is a difficult question as you will get personal preferences and It also depends how much you want to spend? IMO you need at least the following: Processor:   Intel i5 or i7 Gen 4 CPU  - AMD (IMO) are not a match when it comes to
• Movie Studio

  2 answers, most recent on 10/25/2014

  RE: How do I create multiple copies of blu-ray discs from the same video?
  Thank you for your reply.  I have LG Burning Tool and I actually found that Windows 8.1 Pro allowed me to create the discs.  
• Movie Studio

  40 answers, most recent on 6/18/2019

  Making a new collage in MEP
  Terry, since you seems to be doing more of these than the rest of us, could you open a new thread in the Discussions part and do this? Even better, post the methods under tutorials? Does anyone read those tutorials? Here are the detailed steps: 1. 
• Off topic

  3 answers, most recent on 10/15/2014

  3d depth adjusting using Magix Pro x6
  Hello thanks for the try at an answer.  I have read the manual and the adjustments shown in the answer do not change the depth.    I am editing with a 55 inch LG monitor and real D glasses, so I can watch in s3D as I adjust.    I am trying out
• Movie Studio

  2 answers, most recent on 7/21/2014

  Burn blu ray from original .mov files stored on external hard drive question
  Hi, I have successfully edited long projects and burned DVDs from my high resolution *.mov files stored on my usb external hard drive.  I now want to attempt burning these projects to blu ray with my built in LG blu ray burner.  Am I asking for
• Video Easy

  2 answers, most recent on 7/11/2014

  RE: Don't be RIPPED-OFF!
  Yes, the box was plastic-wrapped, possibly by the importer who ensured the contents were for South Africa. The USB device works perfectly in Windows Vista 64 Ultimate. Thanks! Wonderful adapter direct to my onboard USB port. Now I'm looking for a
• Movie Studio

  3 answers, most recent on 3/20/2014

  Movie Edit Pro 2014 hangs (freezes) while editing
  I have been fighting an issue (or several) since buying the MEP 2014 Plus  program a few months ago. A long time user of MEP for about a decade, I moved from MEP16 (which ran great), to 2014 since I now use AVCHD MTS. I have begun using the proxy
• Movie Studio

  One answer, on 3/10/2014

  General advice for editing gaming sessions
  I bought MAGIX Movie Edit Pro 2014 Plus within the last two weeks via Steam for editing my gaming sessions.  I use FRAPS or PlayClaw5 for capturing my gaming as AVI files.  What I want to do is take my long, 30-50 minute gaming sessions and
• Movie Studio

  7 answers, most recent on 2/18/2014

  Travel Route Animation: Experimenting with options
  Here's a quickly assembled illustration of some of the experiments I've been doing. I'm attempting to decide on one or two approaches as I have many walks to animate over the coming months. Would appreciate any feedback
• Movie Studio

  2 answers, most recent on 1/9/2014

  in Movie edit pro 2014 exported and reimported frames change color
  Since MEP balks at some Virtualdub filters and does not have rotoscoping capability, I have to export frames, edit them externally, and then reimport them.  In this process the color changes slightly.  This happens no matter the format of export. 
• Photostory

  5 answers, most recent on 12/30/2013

  RE: How does one create a Blu-Ray compatible disk with 1920x1080p 60fps 16x9 specifications?
  Hello Yvon-Robert, Thank you for your suggestions.  I have burned from ISO images and written the encoded videos directly to disk with equal lack of success.  Blu-Ray is a set of standards laid down by a consortium of vendors from across the
• Movie Studio

  6 answers, most recent on 10/21/2013

  RE: What is the fastest way to burn multiple copies (say 20) of a project to DVD?
  Hi @YR . . . . but you need to use 2 identical brand name of DVD burner . . . .  Using Nero 12 I disagree. I have used   1 x LG DVD, 3 x Pioneer DVD (two different models) and 1 x Sony DVD writer  - all internal  - simultaneously  to burn a
• Movie Studio

  3 answers, most recent on 10/8/2013

  RE: Missing video on track one - movie edit pro
  Thanks for the info. I tried that, but to no avail. I'll try and shoot you a picture of how it looks. Track one is empty, but the video label shows above the timeline (video116.wmv) above the time. In the scene overview mode, most of the scenes