Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

I have an issue where all forms of sound from VST midi instruments stop functioning normally. They become distorted, slow, glitchy and cut out. This happens in all methods of playing the VST sounds: Keyboard play while the arranger is not playing,

Movie Studio

37 answers, most recent on 6/21/2023

RE: Rendered Video is flickering/pulsing

All - Thank you for your responses and assistance. Here are the beginning of answers to your questions. I'm out of time to post the rest, as I have to get to work in a few minutes. Thanks in advance for whatever you can give me! Playback of the

Rescue Your Videotapes!

4 answers, most recent on 4/10/2023

RE: Not recording full length

@Linda-Luu I would wholeheartedly agree with everything that @AAProds has written, especially this: -Is there some big glitch in the tape at the 6 minute mark that might kick off the recording? I do a lot of such transfers for clients and by far the

Video Pro X

148 answers, most recent on 4/18/2023

RE: General discussion on add-ons

@Reyfox Hi. It doesn't have to be an individual graphics plugin that will cause that amount of ram usage but a combination of smaller ones running parallel. I am currently running a two minute twenty two second 4K export that will take me a while to

Video Pro X

2 answers, most recent on 3/12/2023

Infusion Engine III

After reading more about Direct X12 and the differences between that and Direct X 11 I am assuming that the Infusion Engine has been built around this difference to improve both playback and exporting capabilities. Therefore it would seem that. It

Movie Studio

8 answers, most recent on 9/5/2023

RE: HEVC codec issue error even with codec already installed

@Bryan-Frear Hi Bryan. I was merely suggesting they add some context to the error message so it doesn't look broken when it's not. I think that is a fair comment. The program and contents are not flawless and I for one have complained many times

Movie Studio

19 answers, most recent on 2/16/2023

RE: Window Arrangement keeps changing

Thank you again for persistence :) I have some screenshots for my system which I believe covers was is being asked for. I only installed the driver as per ASUS recommendation to leverage the capabilities. I am not a gaming person but do a lot of

Movie Studio

8 answers, most recent on 12/23/2022

RE: Magix Video Deluxe 2013 Plus vs Windows 11

@Pawe-Faracik Hi . . . . switched to windows 11 and the program stopped working . . . . It is possible that the .NET component of Windows has been turned off check that the .NET features are turned on as shown in the image below. . To add to

Movie Studio

22 answers, most recent on 1/27/2023

RE: Dark videos after upload to youtube

@CubeAce Hi Ray . . . . I have against using Movie Studio or Movie Edit Pro etc are the recording settings are a little limited and if you are using multiple monitors I have found no way to select which monitor screen to capture. . . . . This would

Movie Studio

22 answers, most recent on 1/31/2023

Dropped sound with imported video files from MiniDV tape

I have tried to import a video file from my an old camcorder which used MiniDV tapes using a firewire cable (4 pin camera to 6 pin on firewire pc card). The recorder function in MAGIX Movie Studio 2023 finds the camera okay and is able to control

Movie Studio

7 answers, most recent on 5/20/2023

RE: Benchmark Test for 2023

Last time I ran the project I think I was using MEP 2019 and only tested rendering to MP4. My best time for an export then was 13 minutes 1 second. My system specs have only changed from 32 GB of ram to 64GB of ram now. The project hardly uses more

Video Pro X

16 answers, most recent on 2/27/2023

RE: Video ProX 12 -> Video ProX 14 disaster

@DominikStrycharski Your system in theory should be coping slightly better than my own then. I assume you are running the latest game ready driver for the nvidia card which should be version 526.86 and version 31.0.101.2115 for the Intel HD 630 and

Movie Studio

38 answers, most recent on 1/10/2023

RE: Upgrade / Update?

@jeff-brown8145 Hi. As the M-Track Solo is an audio interface and there are Windows 11 drivers available on their website (I checked) then it should show up in the Windows audio devices and be active to be picked up by Movie studio as long as you

Web Designer

No answers, created on 2/22/2023

Navigation Bar disappeared after computer crash

Hi everyone. I'm running a PC with Windows 10. My computer crashed, and the hard drive died. I had to reload everything from scratch, including Xara Web Designer Premium v.16. Luckily I still had the CD-ROM. But of course, all my web pages were

Movie Studio

37 answers, most recent on 6/21/2023

RE: Rendered Video is flickering/pulsing

@Darynn-Ho @Former user Hi. I agree with Gids' analysis of the original file and your copy which has ended up too compressed. These areas are losing the most information. If the original has blown highlights though that may not improve by much

Movie Studio

8 answers, most recent on 7/12/2023

Fonts Appearing Incorrectly

I have a preferred Google font that I use called Lexend. I'm trying to use it with Movie Studio 2023 Platinum, and I've run into a couple issues. Firstly, I have the whole font family downloaded, consisting of Thin, ExtraLight, Light, Regular,

SOUND FORGE

One answer, on 1/15/2023

Not getting audio input to register at all to be able to record

I am using Sound Forge 12.6.0.361 on an Intel i7 Windows 10 pc using Creative SB Audigy 2 pci-e sound card. This is a self built computer but I have been successfully using the same hardware (excluding hard drives) for years. After reloading

Video Pro X

One answer, on 12/3/2022

RE: No picture in any format video export

@jwolf Hi, and welcome back to the user to user forums. Have you tried setting the program settings for Import, Processing, and Export to all use the CPU as your current graphics card is no longer supported by the program. Also make sure you don't

Movie Studio

34 answers, most recent on 12/4/2022

RE: What is most important to have in a video editing PC build using Magix

@johnebaker My graphics card is an NVidia GeForce GTX 1050 Ti and drivers are updated. To be clear, the issue as described by my computer guy isn't how many drives the software uses, it's that the drives are different types of drives, having to

Movie Studio

84 answers, most recent on 5/20/2023

RE: Benchmark for Movie Studio 2023

@browj2 Hi John. There appears to be two files extra. I don't know if your program created them if your backup was turned on. I have shown where they are on your image, crossed through. The rest appear to be OK. @MarcinKrk Hi Marc. To have both

ACID

5 answers, most recent on 10/15/2022

RE: MIDI device latency in real-time (ACID 10.0.6)

Thanks for the reply! No sound card but Realtek chip on motherboard. I tried selecting the Realtek ASIO driver but ACID crashes every time I do.

Movie Studio

19 answers, most recent on 12/30/2022

RE: Project created with MS17 Platinum Pan zoom don't work in MS2023 Plat

OK, keeping the issue in this thread: Copied from original thread: File/Open vf project that worked with MS17 Platinum. It crashes. Followed directions to restart. I hit button to display crash log and nothing happens. Copied from this thread:

Movie Studio

34 answers, most recent on 12/4/2022

RE: What is most important to have in a video editing PC build using Magix

@Tusk Hi . . . . He said it was because they are different types of drives and the crash is occurring because the program has to draw from the other drive (E), which stresses the system if you're using large files, causing the crash... is this

Music Maker

7 answers, most recent on 12/1/2022

RE: Owns 2021 premium and purchased 2023 premium - can I still use both?

I just uninstalled, reinstalled and updated again it says I have a different version. 30.0.1.13 and these are my specs AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G 3.90 GHz 8GB RAM 64-bit operating system, x64-based processor @LES-DA Hi .