MEP keeps prompting for installing extra components on every launch

Basel-Shishani wrote on 7/29/2021, 3:48 AM

[Update to MEP Ver. 20.0.1.80(UPD3), Win10].

I updated to the latest version, but after install it just keeps prompting for the extra component installs at every start up. Initially there was a box that said 'don't show this message again' which I selected, but it keep showing, and the option to stop the notification stop showing after that, so I'm stuck with it it seems!

I tried removing the program and re-installing, but getting the same behaviour.

I just want to stop MEP from displaying this annoying notification every single time it starts, but the dialog for stopping it is not showing anymore, and I can't find an option for it in the settings.

 

Comments

CubeAce wrote on 7/29/2021, 5:39 AM

@Basel-Shishani

Hi Basel.

Have you tried un-ticking each box and selecting continue instead of cancel?

Ray.

 

 

Windows 10 Enterprise. Version 22H2 OS build 19045.5737

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2135 for 7th-10th Gen Intel® with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 31TB of 10 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 572.60 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Vegas Pro 21,Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio. CS6 and DXO Photolab 8, OBS Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."

Basel-Shishani wrote on 7/29/2021, 6:18 AM

@CubeAce

I did, 'continue' just get greyed out. I also tried installing just one component, still asks for the rest at next launch.

CubeAce wrote on 7/29/2021, 7:29 AM

@Basel-Shishani

Hi Basel.

Try going to File \ program settings \ System and click the Reactivate dialogue box and see if you get your original options back.

I confess I've never had to do this as I have all downloads on my system.

Good luck and I hope that works.

Ray.

 

Windows 10 Enterprise. Version 22H2 OS build 19045.5737

Direct X 12.1 latest hardware updates for Western Digital hard drives.

Asus ROG STRIX Z390-F Gaming motherboard Rev 1.xx with Supreme FX inboard audio using the S1220A code. Driver No 6.0.8960.1 Bios version 1401

Intel i9900K Coffee Lake 3.6 to 5.1GHz CPU with Intel UHD 630 Graphics .Driver version Graphics Driver 31.0.101.2135 for 7th-10th Gen Intel® with 64GB of 3200MHz Corsair DDR4 ram.

1000 watt EVGA modular power supply.

1 x 250GB Evo 970 NVMe: drive for C: drive backup 1 x 1TB Sabrent NVMe drive for Operating System / Programs only. 1X WD BLACK 1TB internal SATA 7,200rpm hard drives.1 for internal projects, 1 for Library clips/sounds/music/stills./backup of working projects. 1x500GB SSD current project only drive, 2x WD RED 2TB drives for latest footage storage. Total 31TB of 10 external WD drives for backup.

ASUS NVIDIA GeForce RTX 3060 12GB. nVidia Studio driver version 572.60 - 3584xCUDA cores Direct X 12.1. Memory interface 192bit Memory bandwidth 360.05GB/s 12GB of dedicated GDDR6 video memory, shared system memory 16307MB PCi Express x8 Gen3. Two Samsung 27" LED SA350 monitors with 5000000:1 contrast ratios at 60Hz.

Running MMS 2024 Suite v 23.0.1.182 (UDP3) and VPX 14 - v20.0.3.180 (UDP3)

M Audio Axiom AIR Mini MIDI keyboard Ver 5.10.0.3507

VXP 14, MMS 2024 Suite, Vegas Studio 16, Vegas Pro 18, Vegas Pro 21,Cubase 4. CS6, NX Studio, Mixcraft 9 Recording Studio. Mixcraft Pro 10 Studio. CS6 and DXO Photolab 8, OBS Studio.

Audio System 5 x matched bi-wired 150 watt Tannoy Reveal speakers plus one Tannoy 15" 250 watt sub with 5.1 class A amplifier. Tuned to room with Tannoy audio application.

Ram Acoustic Studio speakers amplified by NAD amplifier.

Rogers LS7 speakers run from Cambridge Audio P50 amplifier

Schrodinger's Backup. "The condition of any backup is unknown until a restore is attempted."

johnebaker wrote on 7/29/2021, 9:56 AM

@Basel-Shishani

Hi

See this topic for how to stop the Installations Manager appearing.

John EB
Forum Moderator

VPX 16, Movie Studio 2025, and earlier versions 2015 and 2016, Music Maker Premium 2024.

PC - running Windows 11 23H2 Professional on Intel i7-8700K 3.2 GHz, 16GB RAM, RTX 2060 6GB 192-bit GDDR6, 1 x 1Tb Sabrent NVME SSD (OS and programs), 2 x 4TB (Data) internal HDD + 1TB internal SSD (Work disc), + 6 ext backup HDDs.

Laptop - Lenovo Legion 5i Phantom - running Windows 11 24H2 on Intel Core i7-10750H, 16GB DDR4-SDRAM, 512GB SSD, 43.9 cm screen Full HD 1920 x 1080, Intel UHD 630 iGPU and NVIDIA GeForce RTX 2060 (6GB GDDR6)

Sony FDR-AX53e Video camera, DJI Osmo Action 3 and Sony HDR-AS30V Sports cams.

Basel-Shishani wrote on 7/29/2021, 1:49 PM

Problem solved - thanks.

@CubeAce I did reactivate, the dialog appeared, I then selected 'don't show' then 'Ok', and this created the same problem. Went through the same process again, selected 'don't show' then 'later', and then the problem goes away.

@johnebaker Yes it's the same problem described there.

 

A VENT OUT TO DESIGNERS/DEVELOPERS:

Make program state readily controllable in the settings, as in 'stop start up messages', rather than this STUPID trap. And the default behaviour should be to stop the messages regardless of selecting "Ok' or 'Later'. Haven't we learnt that such hidden side effects are BAD!

And Magix: don't we have anyone running the program through basic UX testing!