Comments

me_again wrote on 1/25/2022, 10:23 AM

@ROGER-OCONNELL

Greetings and welcome. I'm making the assumption that this is your first experience of Movie Edit Pro. If not, did any previous version work on your system?

Take a look at the attached; it shows the MINIMUM requirements to run MEP 2022.

It's not looking too good I'm afraid..

AndyW

Ps I must add that I'm no expert in any way, shape or form so hopefully someone that knows will reply.

 

 

Last changed by me_again on 1/25/2022, 11:36 AM, changed a total of 1 times.

"Just when I think I've learned the workrounds of MEP/MS the bounders go and update it"

Aorus Z690 Elite DDR4 Motherboard

12th Gen Intel(R) Core(TM) i7-12700K, 3600 Mhz, 12 Core(s) 20 Logical Processor(s)

64gb (4x16gb sticks) DDR4 3200Mhz

Intel(R) UHD Graphics 770

Gigabyte GeForce RTX 4060 Eagle OC 8Gb DDR6 DLSS3 Windforce

Corsair RM750 PSU, be quiet! Pure Rock 2 cooling

System drive 500Gb 4.0NVMe M,2 SSD, dedicated video/audio drive 2Tb Gen 4 NVMe SSD, 2x 500Gb Local Fixed Disks (Music etc), USB3 expansion drive 5Tb and 2Tb

Audio Onboard ALC1220 Amp-Up, Windows 11 Home updated as and when

Movie Studio 2025 Suite, Photo Manager Deluxe 13

Norton 360

All Drivers updated as they become available.

AAProds wrote on 1/25/2022, 7:12 PM

@ROGER-OCONNELL @me_again

I'm running MEP 2022 on a much lower spec machine than that and the transitions are working fine.

Try:

-File>Settings>Reset Program Settings to Defaults

-On the File>Settings>Device Options tab, change the Hardware Acceleration dropdowns.

 

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Magix Video Deluxe 2026 Ultimate (although it comes up as "Premium").

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 Home Version 2009

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

Movie Studio 2023

Movie Studio 2024

VPX 12

AAProds wrote on 1/25/2022, 7:15 PM

@ROGER-OCONNELL

Also, which exact transition is not working? We can then try that particular one here.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Magix Video Deluxe 2026 Ultimate (although it comes up as "Premium").

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 Home Version 2009

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

Movie Studio 2023

Movie Studio 2024

VPX 12

ROGER-OCONNELL wrote on 1/26/2022, 12:36 AM

i am sorry i should have said all are working epcept all 3d and basic transition

ROGER-OCONNELL wrote on 1/26/2022, 12:57 AM

tried your way and altered processing to microsoft worp device and all are working now thanks for that

AAProds wrote on 1/26/2022, 2:26 AM

@ROGER-OCONNELL

"Warp me up, Scotty" Good to hear. Thanks for the feedback.

All my forum comments are based on or refer to my System 1.

My struggle is over! I built my (now) system 2 in 2011 when DV was king and MPEG 2 was just coming onto the scene and I needed a more powerful system to cope. Since then we've advanced to MP4 and to bigger and bigger resolutions. I was really suffering, not so much in editing (with proxies) but in encoding, which just took ages. A video, with Neat Video noise reduction applied, would encode at 12% of film speed. My new system 1 does the same job at 160% of film speed. Marvellous. I'm keeping my old system as a capture station for analogue video tapes and DV.

System 1

Windows 11 v23H2 severely modified by Openshell and ExplorerPatcher

Power supply: 850W Cooler Master (should have got modular)

CPU: Intel i7 13700K running at 3400mhz, cooled by a Kraken 2x140mm All In One liquid cooler.

RAM: 64gb (2x32gb sticks) G.Skill "Ripjaws" DDR4 3200Mhz

GPU 1: iGPU UHD 770

GPU 2: NVidia RTX 3060Ti Windforce 8gb

C drive: NVME 500gb

Bluray Burner: Pioneer BDR-212D

Various other SSD and HDDs.

Monitor: 27"/68cm Samsung, 2560 x 1440, 43 pixels/cm.

MEP 2021 version 20.0.1.80

Magix Video Deluxe 2026 Ultimate (although it comes up as "Premium").

Magix Video Easy version 7.0.1.145

System 2

(Still in use for TV and videotape capture)

Windows 10 Home Version 2009

CPU: i5-750 at 2670mhz with 12gb RAM

Onboard IEEE1394 (Firewire) port

GPU: ATI Radeon HD 4770 (512mb) which is ignored by MEP

Hard drives: C Drive 256gb SSD, various other HDDs.

Monitor: Dell 22"/56cm, 1680x1050, 35 pixels/cm

Movie Studio 2023

Movie Studio 2024

VPX 12