• SOUND FORGE

  38 answers, most recent on 9/16/2025

  RE: MP3 conversion glitches
  The lengths vary, Rick. They could be as little as a few seconds (opening credits) to just over an hour (a long chapter). I exported the recorded audio as WAV from REAPER (been doing that for years and nothing's changed on that end) and then edited
• Movie Studio

  3 answers, most recent on 8/9/2025

  How do you access voice to text in movie studio 2025
  I recently purchased movie studio Suite 2025 and all my research that this particular version had voice to text. I have installed every add-on available to me and I'm not able to locate where this feature is. When I go to the hub It shows me text to
• Movie Studio

  11 answers, most recent on 5/2/2026

  RE: MEP 2016 Plus - Trying To Copy Media Onto New Project
  @CarpentersMate Looking good there, Mike! That looks like a very detailed project; and so far, and excellent video. That really was a special event. The green line is the volume curve; hide it by right-clicking on the audio object and unticking
• ACID

  6 answers, most recent on 9/25/2025

  RE: Does Acid pro have a CHANCE!!.
  @DyReck411 I found this explanation. It was originally never planed to develop new versions of Acid and Sound Forge. We simply got lucky. The truth was that VEGAS Pro was the primary target of the acquisition and was spun off as a child company. SF
• Photostory

  4 answers, most recent on 12/12/2025

  RE: Inserting image
  @Tom-Borg Hi, Version 25 is PhotoStory 2026. The tip while dragging 'Press Ctrl for further insert/replace options' is a new feature in 2026. However, I don't see it in Storyboard mode, only timeline. In Storyboard mode, dragging opens up a space
• Movie Studio

  4 answers, most recent on 3/16/2026

  Updating / Upgrading present and future concerns
  Greetings, I'm constantly being bombarded with emails to update or upgrade my MS2025 Premium to VDL2026, even more so over the past couple of weeks. I'm sure the same applies to all their other video and audio users. If "new" Magix still runs true
• Movie Studio

  47 answers, most recent on 8/24/2025

  RE: "Takes" functionality
  @CubeAce Hi Ray, .....Ha! Lost in translation I think..... I wasn't lost in translation, but rather because of this text: "Unfortunately, a 4TB drive now lasts less than a year." I continued with this, thinking you meant to imply that an external
• Movie Studio

  47 answers, most recent on 8/24/2025

  RE: "Takes" functionality
  @CubeAce Hi Ray I think Al has hit the nail on the head with this: . . . . multiple files over a couple of drives containing snippets of Mirage video . . . . Bringing these together into one location as Takes, ie references to the video location and
• SOUND FORGE

  38 answers, most recent on 9/16/2025

  RE: MP3 conversion glitches
  Hi Rick, Just thought I'd pop back here with a few updates: 1) firstly, the last batch of audiobook files I sent the client were fine (phew), but I'm not sure why. I batched them with SF13 or SF14 Batch Converter 2) I bought and installed a new
• Off topic

  160 answers, most recent 9 hours ago

  RE: Magix support has not responded to support tickets for months
  It appears to be impossible to get response from a human at MAGIX technical support. I have tried multiple times to submit a ticket, but all I get is constant bot/AI intrusion in MAGIX's attempt to keep customers from reaching a human support agent.
• Off topic

  One answer, on 1/27/2026

  [Closed] Non-existent technical support
  It appears to be impossible to get response from a human at MAGIX technical support. I have tried multiple times to submit a ticket, but all I get is constant bot/AI intrusion in MAGIX's attempt to keep customers from reaching a human support agent.
• Photostory

  9 answers, most recent on 2/3/2026

  Magix Travel Maps - OpenStreetMap issue
  Is anyone else having an issue with OpenStreetMap in Magix Travel Maps? I have 4 PCs all running the latest version of Travel Maps. Two are running Windows 10 and Two are running Windows 11. All are fully up to date with Windows updates. All are up
• Movie Studio

  11 answers, most recent on 5/2/2026

  RE: MEP 2016 Plus - Trying To Copy Media Onto New Project
  @CarpentersMate Greetings Mike, Assuming that MEP couldn't find the photos and they aren't in the Recycle Bin as Al suggested, then this is a long shot but may be worth a try. If the computer was left on for hours, is it possible that Malwarebytes
• Rescue Your Videotapes!

  35 answers, most recent on 7/16/2025

  RE: Geen geluid bij overdracht VHS-band
  @Bol @MV650 Hi Rob, Marc. I forget some people have probably never done this whereas I have been doing such things for over 40 years. Apologies for that. Personally I would recommend any specialised electronic contact spray from WD40 or Radio Spares
• SOUND FORGE

  38 answers, most recent on 9/16/2025

  RE: MP3 conversion glitches
  Hi @Paul-Fegan, Did you 'save' or 'Save as' the PCM file prior to encoding the MP3? If you do reinstall SFP-18, I would first try "Reset all preferences and clear cached data" in SF's 'File' menu. If that does not help and you plan to
• Movie Studio

  5 answers, most recent on 2/23/2026

  RE: Incorrect frame rate on AVI output, incorrect display of frame
  @clement5 Hi AFAIK the difference in the number of frames is a result of where the video clip start/end boundarys are edited to in relation to the dropping frames sequence which is a result of converting from 24 fps. Converting 24fps to 23.97 fps,
• Movie Studio

  3 answers, most recent on 6/30/2025

  RE: Movie Studio (Video Deluxe) vs Video Pro-X
  Hi Last year I migrated from MMS 2024 to VPX16 UltimateIt works more smoothly, has more features and I suggest you give it a try. In my case, I was looking for more control and organization of project clips because it has a "project folder". My
• Movie Studio

  14 answers, most recent on 3/26/2026

  RE: Hardware Rendering
  @ReyfoxThe Alienware, dedusted a month ago. The mini PC as well. Have not repasted the unit but the temp profile was always hot from day one. This was a compliant I read about Alienware, bad air flow design. The Alienware I have was a test unit for
• Movie Studio

  70 answers, most recent on 9/19/2025

  RE: Reasonably affordable graphics card for Magix Movie Edit Pro Plus
  @Reyfox @Tusk After a long think I reread the entire topic. I have made most of my comments on my own experiences based on using 4K mp4 video files that have a maximum bit rate of 120Mb/s which is my mistake, so part of your problems could still be
• Movie Studio

  47 answers, most recent on 8/24/2025

  RE: "Takes" functionality
  Hi all, Interesting discussion and I may have to change my workflow in some cases, in particular in cases like those of @Pete-Lowland. I, too, have to treat 8mm, S8 sound, VHS and other old files that can contain more than one subject or theme. My
• Movie Studio

  14 answers, most recent on 9/8/2025

  RE: MAGIX Video deluxe 2026 Premium (Constantly Crashing on Startup)
  @ItsMichael Hi. I've looked closely at the spec of your Asus card as I have a standard 3060 12 GB card from Gigabyte. The only difference I can see is not in the hardware but the way Asus has tweaked it to give about another 3% boost over the
• Movie Studio

  16 answers, most recent on 9/5/2025

  RE: Blu-ray media created playback issue. Image bounces/jitters
  @calamar @Bol @johnebaker This post explains why external GPU encoding on longer occurs on Interlaced Bluray projects: https://www.magix.info/us/forum/vpx15-no-hardware-encoding-during-bd-burning--1333831/?page=2#ca1912059 As far as "minimum specs:
• ACID

  One answer, on 2/4/2026

  Magix acid pro
  Hello MAGIX Support Team,   I am contacting you regarding MAGIX ACID Pro 11 Suite, which I purchased from your official website for 150€.   For more than two years, I have been dealing with constant bugs, crashes, and serious stability problems.
• SOUND FORGE

  10 answers, most recent on 12/5/2025

  RE: Error Code 24. Just bought and installed.
  @Les-Wilkins Sadly, we don't know how to get a response from Magix support. I'm waiting for six weeks for a response. It looks like there is no longer any support staff active at Magix. I haven't tried to contact some higher-ups. Current CEO of