• Movie Studio

  5 answers, most recent on 5/19/2026

  [Solved] That old chestnut - Quicktime
  Greetings, For years now, I've been using Quicktime Alternative 1.8.1 mainly because I occasionally use MPEG Streamclip which requires it and MS2025 works with it. During a bout of certifiable stupidity I uninstalled Qalternative. "Oops" I thought,
• Movie Studio

  2 answers, most recent on 10/25/2025

  RE: using timecodes to synchronize tracks
  @Joel_ Hi Video deluxe does not support syncing clips by timecode. However if the videos have the same audio track they can be synchronised by:- Hold down the Ctrl key and select each video clip to be syncedobject.  Right-click one of the main
• Movie Studio

  16 answers, most recent on 4/26/2026

  RE: GL Transitions ?
  @idd-2016 Hi I know of only 2 mainstream video editors which support OpenGL 'shader injection', and neither of them are Magix, or former Magix, products. Other software such as FFMPEG and Blender can utilise GL Transitions with video. Looking at the
• Movie Studio

  6 answers, most recent on 6/8/2026

  RE: MAGIX Video deluxe 2026 Premium-problem
  My video was doing exceptionally fine until today. Now all of my clips are sitting in the lower left corner and I can't seem to get it back to the middle... Someone please help me as I have a video memorial for a wake due this evening at 7p. Thanks
• Movie Studio

  6 answers, most recent on 8/22/2025

  RE: Magix video deluxe 2026
  Hi, @Johnebaker: Thanks for your last tip, it changed my work flow. Just one comment...I am working with double8 and super8 mm films. When digitizing those films the result is an MP4 running at 20fps. The original film is however 16 resp 18 fps. To
• Video Pro X

  3 answers, most recent on 11/8/2025

  VPX17 Dragging video clip from timeline to Project Temp Folder
  Hi, VPX17 23.0.1.269 New wrinkle in VPX17. Drag a video clip, trimmed or untrimmed, from the Timeline to the Project Temp Folder. The Type in the PTF should be Video, but now shows up incorrectly as Movie. As well, the two buttons for preview, play
• Movie Studio

  32 answers, most recent on 4/2/2026

  RE: Export quality from RTX Ti3060 far inferior to UHD770
  Hi @johnebaker, Thank you for the information.The .318 patch seems to have fixed the basic stuttering issue with Nvidia H.264 renderings.(I also tested it briefly with this UHD clip: https://pixabay.com/videos/snow-winter-nature-river-wharf-329674/ )
• SOUND FORGE

  3 answers, most recent on 8/14/2025

  FX sampler
  Using youtube audio, you can click on any to hear what it sounds likeThere are bunches of things I do not have a clue what they do,, yes you have howtos.. but say fxyou create a video clip with an array of sound effects each segment b4 and after
• Movie Studio

  9 answers, most recent on 5/28/2026

  RE: Split video in to separete frames
  @badbob Hi, We cross-posted. I see. I strongly suggest that you upgrade to Video Deluxe 2026 Ultimate (current name for Movie Edit Pro) which has proDAD Mercalli to stabilize video clips. Save yourself a ton of work. Just make sure that your
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  @AAProds Hi Al The last time I use Smart copy and it was successful was with MMS 2024 in a large project consisting of 14 movies, all copy and render actions were listed in the results dialog. Smart copy - the entire video clip is copied as
• Video Pro X

  33 answers, most recent on 7/15/2025

  RE: keyframe bugs remaining in the current version of VPX17 (v..269)
  @AAProds As per the previous post, it was clear that the beginning of the object in the key frame is directly related to its source video. So answering your question, it does not necessarily mean that it is the start of the object. If you create 2
• Movie Studio

  11 answers, most recent on 5/2/2026

  [Solved] MEP 2016 Plus - Trying To Copy Media Onto New Project
  Hello to all my old friends! Hope all is well ... I'm going on 78, and still using MEP 2016 Plus (for now). Fer the life of me still haven't been able to successfully copy media from one project into a NEW fresh project. Currently have a glitch that
• Movie Studio

  4 answers, most recent on 6/28/2025

  placing clips on timeline by date
  Hello to all Video Editors, I use Movie Studio 2025 Suite, I recorded my video clips and .jpg pictures using a drone, gimbal and extra phone camera...for 5 days. Now I want to place them all on a timeline sorted by date AND time - to ease editing.
• Movie Studio

  4 answers, most recent on 7/17/2025

  RE: [Solved] Video Deluxe 2026 Plus: Import of some videos trim the last 2 minutes
  @DonL Hi This is a common issue with video files that are Variable Frame Rate (VFR), VDL 2026, like many other video editors does not always handle VFR video correctly especially when the Minimum and Maximum frame rate range is relatively
• Movie Studio

  9 answers, most recent on 10/24/2025

  RE: [Solved] Movie Sudio 2025 developed a strange behaviour
  @johnebaker Greetings John, I've installed the Emergency Windows Update (KB5070773) (26200.6901) which ostensibly is to fix a problem with no USB in Windows recovery mode. After an hour of editing with the Cineform clip there have been no black
• Movie Studio

  5 answers, most recent on 5/11/2026

  RE: Improve video quality with AI
  I tried enhancing some old VHS recordings before, and AI tools can definitely help sharpen details and reduce noise, even if they can’t fully restore the original miniDV quality. It’s worth testing on a short clip first before processing everything.
• Movie Studio

  47 answers, most recent on 8/24/2025

  RE: "Takes" functionality
  @me_again Hi Andy . . . . if the video clip has no audio or is ungrouped (audio and video separate) then the Take is corrupt, only 1 second long, all black and crashes MS2025 when trying to add to timeline . . . . Confirmed on 4 counts for MMS 2025
• Video Pro X

  4 answers, most recent on 7/31/2025

  RE: [Solved] Multicam issues
  @Jordanm Hi From the image, it looks like the number of tracks, set in the project settings, is too low (8 ?), try increasing the value to 32 tracks as shown below Once in Multicam editing mode you can add a further cameras up to a maximum of 4, by
• Video Pro X

  33 answers, most recent on 7/15/2025

  RE: keyframe bugs remaining in the current version of VPX17 (v..269)
  @Betovalle 1- incorrect keyframe timeline time marker Unless I have a misunderstanding of the issue; the "keyframe time" is the time reference to the original clip rather than the timeline itself. For example, if my original clip is 20 seconds long
• Other products

  2 answers, most recent on 7/8/2025

  Video out of sync (Video easy Video Saver (2022))
  Bought ´Video easy Video Saver (2022)´ program with cables so I could save ercordings from older vhs tapes. Managed to install and registered it. Problem is that longer videos I capture from tape are out of sync... audio comes 1-2 second too early
• Movie Studio

  24 answers, most recent on 9/20/2025

  RE: Inserting a clip on the timeline
  @Gid Hi Gid, The title of the topic, which I was going by, is not the same as the content, so is a little confusing. your comment is correct when moving clips I responded with how to avoid the issue of the clip ending up in the wrong place when
• SOUND FORGE

  9 answers, most recent on 8/14/2025

  RE: The cost of text to speech
  Just started it up again, the old screen with 1403 left vanished. Now saying enter characters (max 10,000) the old prompt to get more is no longer thereI do want to make a couple audio clips using another version I created a trial version last night
• Video Pro X

  29 answers, most recent on 9/13/2025

  RE: Kodak C330 audio
  @AAProds, @nicolesharp100 Hi Al . . . . VDL 2026 is saying the video is 25fps . . . . VPX does the same, no matter what frame rate the jpeg encoded actual rate is, tested on other JPEG encoded movie files I have. . . . at 60fps and 48khz . . . I
• Video Pro X

  33 answers, most recent on 7/15/2025

  RE: keyframe bugs remaining in the current version of VPX17 (v..269)
  Actually the situation with VMS17 is more complicated as how the keyframe position behaves can vary with how you adjust the length of a clip. Dragging the beginning of a clip to trim it gives different keyframe positioning to cutting it. Anyway what