• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  Never had smart-rendering work since the arrival of MPEG 4. MPEG 2 used to SR nicely years ago but that's obviously fallen by the wayside. @jak.willis Jak, I think you're worrying too much about quality loss. Do a test. On a short segment of one of
• Movie Studio

  17 answers, most recent on 1/11/2026

  RE: Very high RAM usage even with a few slides
  This is an ongoing issue. (more then 2 years for me) i dont know what magix is doing somethimes. but while running movie studio 2024 ram is filling up to the point of a system crash. way above 95%. (64gb)even when there are only a few short videos
• Video Pro X

  45 answers, most recent on 6/6/2026

  RE: DVDs cut don't play
  Bilbo's on-board burner gave me this response It always did which is why I bought the Verbatim external burner. MS CoPilot had me check the disc with ImgBurn and said"Ah — there’s our culprit, ...Your disc’s Media ID: CMC MAG‑D03‑64 tells the whole
• Rescue Your Videotapes!

  35 answers, most recent on 7/16/2025

  RE: Geen geluid bij overdracht VHS-band
  @Bol Hi Rob. Yes I am. It is in my signature which I keep updated. I notice there is also a switch for mono single channel which is not present in my settings that you have turned off. Stereo mix should allow all inputs to be heard but I wasn't
• Rescue Your Videotapes!

  35 answers, most recent on 7/16/2025

  RE: Geen geluid bij overdracht VHS-band
  @MV650 The round black plug is for an S-Video connection. That is a higher-quality video connection but not all VCRs have S-Video OUT. @Bol There is a subtle difference between that forum post you linked-to and Marc's setup. Your forum post
• Movie Studio

  14 answers, most recent on 3/26/2026

  RE: Hardware Rendering
  @Carl-Johansson when was the last time that you cleaned out the dust from everything inside your PC? Or replaced the CPU thermal paste with quality thermal paste? My computer specs are in my Signature below. I built my PC myself. I've been doing
• Video Pro X

  29 answers, most recent on 9/13/2025

  RE: Kodak C330 audio
  I still get strange errors from Magix when trying to import files from HandBrake. MP4 H264 AAC says "QuickTime is not installed. QuickTime must be installed in order to play this file." MKV H264 AAC says "An unknown error has occurred. No media
• Video Pro X

  29 answers, most recent on 9/13/2025

  RE: Kodak C330 audio
  Confirmed that HandBrake conversion to AAC audio works to get Magix Video Pro X16 to play QuickTime PCM audio. I used: Production Max Preset, MKV Format, H.265 Constant Framerate Same as Source, Placebo Encoder Preset, Average Bitrate 5926 kbit/s =
• Movie Studio

  32 answers, most recent on 4/2/2026

  Export quality from RTX Ti3060 far inferior to UHD770
  I have read at various points that CPU encoding yields better results than GPU encoding, but the experiments I'd done in the past weren't conclusive enough to justify the extra encoding time. I've just started editing drone footage videos
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  @Gra_Ham @CubeAce @me_again @johnebaker @AAProds I downloaded the MKV file, but couldn't play it through the VDL2026 timeline. I received this error message: I use Shutter Encoder (64-bit portable version) as my conversion program. I've converted
• Music Maker

  3 answers, most recent on 2/1/2026

  RE: Content MMM2026
  Hello SP, In the meanwhile I found some more information. That answers all my questions. Thank you for your time.   Features of Music Maker 2026 Premium License Key Components FeatureDescription SoundpoolsIncludes 3 Soundpools and 1 Collection of
• Movie Studio

  One answer, on 7/15/2025

  [Closed] Screen capturing/recording a TV screen
  Hi, I am looking for some help regarding screen capturing/screen recording. I am not all that familiar with screen capturing as I have had very little experience in it, so any help would be much appreciated. To put it simply, I would like to screen
• Rescue Your Videotapes!

  35 answers, most recent on 7/16/2025

  RE: Geen geluid bij overdracht VHS-band
  Hallo Ray, Below are the current settings. There are only two options: the current one or one with "studio quality." with the same frequency So I don't really see how to adjust them. But these settings might still be OK for this version of the
• Movie Studio

  13 answers, most recent on 9/8/2025

  RE: Nvidia RTX 5080 Graphics Card | But MEP 2026 suddenly stopped using it
  Hallo @Apollo89x  In Ihren Einstellungen ist Level mit 4.1 eingestellt.Für Full HD mit mehr als 30 FPS benötigen sie Level 4.2 Bei UHD (4K) benötigen sie für über 30 FPS Level 5.1 oder sie benutzen AUTO als Einstellung. Hallo und vielen Dank. Ich
• Movie Studio

  11 answers, most recent on 3/22/2026

  RE: Cleaning a really poor quality video
  @CubeAce, Thanks Ray. The varying contrasts and occasional rolling shutter effect are quite easily be removed or at least well subdued by Neat Video and a couple of NewBlues; the clip presented has no effects added at all. The pin sharp horizontal
• Video Pro X

  29 answers, most recent on 9/13/2025

  RE: Kodak C330 audio
  @AAProds, @nicolesharp100 Hi Al . . . . VDL 2026 is saying the video is 25fps . . . . VPX does the same, no matter what frame rate the jpeg encoded actual rate is, tested on other JPEG encoded movie files I have. . . . at 60fps and 48khz . . . I
• Movie Studio

  15 answers, most recent on 9/26/2025

  RE: MAGIX Video deluxe 2026-encoding failed
  @AAProds Hi Al The folder Jeff mentioned is the first half, ie render all the video files needed, of a 2 stage burn process, it is the second stage, the actual burn, whether to disc or ISO file, that creates the correct folder structure from the
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  @Gra_Ham Hi and welcome to the user to user forums. It may depend on what produced the MKV files. They are not all equal. There is a program called MediaInfo that will show the file's data and tell us more and if there is a potential problem. The
• Other products

  3 answers, most recent on 7/13/2025

  RE: Prodad Hide v2 - I can't stop the auto play.
  @Clinton-Peck Hi. The slower the frame rate the less work the program and your computer has to do. You don't need the program to use as many frames ahead and behind to help replace the background. The more static the camera and the more the
• Video Pro X

  29 answers, most recent on 9/13/2025

  RE: Kodak C330 audio
  My theory is that video artifacts might be due to needing to decompress and then recompress the H265 codec while rotating the video on Intel Xe integrated graphics if both the imported and exported videos are H265. I had a similar problem with video
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  @AAProds I tried you new file but it would not import as MKV or MP4. I'm using MMS2024 and VPX16. You must have something installed on your computer that allows you to import the file as an mp4. Your suggestion to @Gra_Ham to recapture his video's
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  Well, I certainly seem to have sparked a lively discussion. Unsurprisingly most of it is well beyond me - but no matter, it has helped. Simplest and quickest is to recapture those tapes I did with PotPlayer (giving the MKV files) directly into Video
• Movie Studio

  20 answers, most recent on 10/9/2025

  RE: Video files not loading
  Hi Reyfox, My camera details are - Panasonic "Lumix" DMC-FZ2000. As a rule, I use it on automatic "iA+" but am able to choose certain bits of the settings. So, I used a frame of 16:9; Recording Format of AVCHD ; REC Quality with as the following
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  @ericlnz The image isn't changed. The two fields are the same. It's just that they aren't taken from two periods in time but are from the same time. When read as an interlaced file (instead of progressive) the top field is used to create a full