• Other products

  5 answers, most recent on 7/26/2025

  RE: Music Studio Generation 6 or Music Studio 2004
  @RavNik Even old VIP projects from Music Studio 6 should still be compatible with Samplitude Music Studio X8 or Samplitude Pro X8. You can try the free 30 days trail version, if you don't have an old version of Music Studio or Samplitude. It could
• Video Pro X

  10 answers, most recent on 12/5/2025

  RE: Video Pro X 11 Crashes Every 5 Minutes
  @MegaMooer Hi. In the end user licence agreement Magix only supplies support for one year from date of purchase. Personally I feel that if it was working in the past then the program hasn't changed but something in the software it runs on has that
• Movie Studio

  31 answers, most recent on 4/16/2026

  RE: Video deluxe 2026
  @ImTerribleAtThis Hi . . . . Magix Video Deluxe 2026 compatible with third party LUTs . . . . Yes with 2 provisos, the LUTs must be a 3D* LUTs and with a .cube file extension. * Nothing to do with 3D/Stereo, this refers to the number of dimensions
• ACID

  8 answers, most recent on 12/15/2025

  RE: Acid Pro 11 plante "update VST plugins"
  @Strictly-East Assuming this is caused by some VST, did you install a new VST between the last time Acid worked and now? Have you removed some entries from the VST paths in the program settings just to make sure Acid only scans certain folders with
• Rescue Your Videotapes!

  7 answers, most recent on 12/2/2025

  RE: DRIVER DOWNLOAD
  @jonathan-m Here are the links to updated drivers. But it could very well be the case that these are no longer compatible with Windows 11. You can get pretty affordable USB video grabbers on websites like Amazon. These one should work fine with
• Movie Studio

  3 answers, most recent on 10/29/2025

  Hardware acceleration affected by motherboard?
  Recently I had to replace a faulty ASUS Z490-P motherboard with a Gigabyte H510M board, having chosen the latter due to its compatibility with my existing RAM and CPU. I had a NVidia 1660Ti GPU in the original build, which I transferred to the new
• Movie Studio

  16 answers, most recent on 12/23/2025

  RE: No video only sound
  @me_again, @emmrecs Hi Snapdragon chips are a 'System on a Chip' (SoC) , ie they are CPU, GPU, audio, and other hardware devices, all rolled into one chip with lower power requirements, then for example CPU, GPU and motherboard combinations found in
• SOUND FORGE

  6 answers, most recent on 8/5/2025

  RE: Having Problems With Sound Forge 17 Crashing Or Otherwise Not Working?
  @GregoryP-Lewis Sound Forge Audio Studio? Problems and crashes could also be caused by the Magix Low Latency ASIO driver. This is an old version of the ASIO4ALL driver and not really compatible with newer Windows versions. If you want to uninstall
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  @jak.willis Hi Jak . . . . Can anyone suggest what product to upgrade to? . . . . Assuming you have replaced the old ZooStorm PC which had issues, we need to know the following before advising, otherwise we can only generalise: Windows version  The
• Photostory

  9 answers, most recent on 2/3/2026

  RE: Magix Travel Maps - OpenStreetMap issue
  @David-Robinson5527 Hi The 'current' version of the OSM API is v0.6 from 2009, see this OSM Wiki page, however - quote: 'Multiple backwards compatible changes were made afterwards without increasing the version number' There is information
• Movie Studio

  5 answers, most recent on 6/13/2025

  RE: [Closed] Import MP4 problems
  @Billy-Green8845 Hi. The reason John has asked for the various specs of both the video files and your computer / laptop is it is difficult to track down why you have problems without those bits of information. Having a machine that can handle
• Video Pro X

  One answer, on 12/16/2025

  [Closed] Technical Issue – VEGAS Pro 16 not opening after Windows update
  Hello I own a permanent license for VEGAS Pro 16 (VEGAS Pro 16.0). After a recent Windows update, the program no longer opens. It freezes at the “Creating windows…” loading bar and never progresses. System details: • Device: HP OMEN 15-ce0xx •
• SOUND FORGE

  13 answers, most recent on 8/8/2025

  RE: Can't register SF-7b even with the key
  Thanks for the continued help. The program installs just fine, and it's under a Sony folder in C: Everything normal there. The program opens normally and functions, except that I keep getting the "26 days left" message. It started with 30 days, and
• Movie Studio

  31 answers, most recent on 4/16/2026

  RE: Video deluxe 2026
  @ImTerribleAtThis Hi . . . . Magix Video Deluxe 2026 compatible with third party LUTs . . . . Yes with 2 provisos, the LUTs must be a 3D* LUTs and with a .cube file extension. * Nothing to do with 3D/Stereo, this refers to the number of dimensions
• Movie Studio

  22 answers, most recent on 10/11/2025

  RE: Serial Number Problem with Video Deluxe2026 Trial
  Thank you John EB, yes, learned about my i5's 10/11 non compatibility issues quite a while back, then health issues intervened and am only just getting round to sorting this all out. Bit the bullet yesterday, after MS decision to allow UK to extend
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  @Can-Dive Hi . . . . A new user just wants to load their video and start editing in a video editor that works. .. . . . Correct. . . . . They don't necessarily desire, or have the skill set to convert the file . . . . This is far easier than
• Movie Studio

  22 answers, most recent on 10/11/2025

  RE: Serial Number Problem with Video Deluxe2026 Trial
  @GeeGee Hi. You don't have to have a one drive account on Win 11. It can be disabled and uninstalled from Windows. It is not however an easy to do operation if you are not that familiar with customising Windows. There are help sections on the
• Audio Cleaning Lab

  11 answers, most recent on 2/24/2026

  RE: Need 2 files from Audio Cleaning Lab 10 cd distribution
  @clement5 Ok, I don't know if SFACL4 still has DX plugin compatibility. Likely not. Can this tool help you? https://craiganderton.org/how-to-use-dx-plug-ins-with-vst-only-daws/ https://www.xlutop.com/buzz/zip/dxshell_v1.0.5b.zip ACL had a very
• Movie Studio

  22 answers, most recent on 10/11/2025

  RE: Serial Number Problem with Video Deluxe2026 Trial
  Hello again JohnEB - Very pleased with your last hopeful comments, as I do very simple transitions etc., nothing fancy. For some background, please read last two paragraphs of my very first post at the top of this thread "Serial Number Problem with
• Video Pro X

  10 answers, most recent on 12/5/2025

  RE: Video Pro X 11 Crashes Every 5 Minutes
  @johnebaker  Hello again,I changed my Program Settings> Display Options> Preview and playback on analog recording> Video mode to Standard Renderer At first, i thought this solved my issue. The program did not force close. I tried closing
• Music Maker

  2 answers, most recent on 3/15/2026

  RE: I installed Music Maker 2014 in new computer.
  @TERRY-BEACH Hi Error code -10  means the program online connection had an error, or was dropped/interupted. Assuming the new computer is running Windows 11. If the serial number begins with P2- then this may be the issue, the P2- serial numbers
• SOUND FORGE

  38 answers, most recent on 9/16/2025

  RE: MP3 conversion glitches
  Hi Rick, thanks for that. I think it's unlikely that the Reaper setting you mention is causing trouble simply because this is a default settings page. I checked my PC in the studio (which is older and has been well tried and tested) and the WAV