• Movie Studio

  4 answers, most recent on 6/27/2025

  RE: Trying to sync some audio
  @Matthew-Mannix Hi, As you have been advised, an audio object in Movie Studio/VDL can only be moved in 1 frame increments, whereas in VPX, you can slide it within a frame. The main objective of aligning two or more audio/video objects using the
• Movie Studio

  7 answers, most recent on 7/5/2025

  RE: Selected Aspect Ratio Not Exporting
  @Peaceful-Pixel Hi. You may need to use either HEVC or AV1 to allow you to export at higher frame rates. Ray. Ok I tried AV1 and that worked. HEVC wouldn't let me use 120fps. Thank you!!
• Movie Studio

  70 answers, most recent on 9/19/2025

  RE: Reasonably affordable graphics card for Magix Movie Edit Pro Plus
  @Tusk Hi . . . . when I try to edit iPhone video, sometimes the video is missing tens of minutes of the end, something about frame rate fluctuations . . . The issue here is that the iPhone and many other mobile devices record Variable Frame Rate
• Movie Studio

  9 answers, most recent on 10/24/2025

  [Solved] Movie Sudio 2025 developed a strange behaviour
  Greetings, MS2025 is starting to annoy me. For the past couple of weeks or so I've been editing some of my nieces GoPro MOVs (I think - Cineform anyway) videos. This has been going well with no real hassle except for some stange reason occasionally
• Movie Studio

  9 answers, most recent on 5/28/2026

  RE: Split video in to separete frames
  @badbob Hi There is an alternate method of achieving images stabilisation without separating the movie in to individual frames or using a 3rd party stabilisation effect. The method here was developed by another forum member, @K-Wood back in 2022 and
• Movie Studio

  32 answers, most recent on 4/2/2026

  RE: Export quality from RTX Ti3060 far inferior to UHD770
  Hi Al Thanks for the video clips, I see the same as you. Can you upload an original drone video for us to test with. Which export preset are you using? The MediaInfo data of the exports looks like the video is being encoded with PAL GOP settings,
• Movie Studio

  7 answers, most recent on 7/5/2025

  RE: Selected Aspect Ratio Not Exporting
  @Peaceful-Pixel There are many historical reasons for the few mainstream frame rates used for film and video. This short video from Angus Davies explains the history of its progression quite well. He doesn't go into the financial or audio benefits
• Video Pro X

  33 answers, most recent on 7/15/2025

  RE: keyframe bugs remaining in the current version of VPX17 (v..269)
  @Betovalle If you place a single clip on the timeline and move it a little to the right, and after creating the FPR event, type Alt + G and create a keyframe. Then type Alt + W and create another keyframe. In the keyframe timeline, play around
• Movie Studio

  13 answers, most recent on 9/8/2025

  RE: Nvidia RTX 5080 Graphics Card | But MEP 2026 suddenly stopped using it
  Additionally though, would the video quality improve if I set it to 4.2, even at 25 frames per second? No. This would not change the quality of Full HD 25 FPS. These are standards, similar to ISO values ​​in
• Movie Studio

  4 answers, most recent on 9/11/2025

  RE: Overlapping Frames
  Hi John, Thanks for the reply. How do I tell if other objects/frames are blocked, and how would I unblock them? I'm not using any effects on "All Media." I'm using Effects, .... / Sharpness Tab. When that doesn't help, I use the AI Sharp Tab. I've
• Movie Studio

  69 answers, most recent on 8/10/2025

  RE: Unable to import MKV files into Video deluxe 2026 Plus, Windows 10
  Thanks for your various replies - really helpful and feeling we are getting somewhere. I tried downloading MediaInfo again and it worked perfectly - and your instructions helped a lot - but for whatever reason it seems the thing I downloaded
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  AFAIK, you cannot do this, there is more to this I can do it, and have done it, with several editing/DVD programmes including Vegas Pro, VMS and DVDA. The image isn't changed. The two fields are the same. It's just that they aren't taken from two
• Movie Studio

  5 answers, most recent on 7/3/2025

  RE: 2nd try AI Media Management in Video Deluxe
  @Lew-G Hi . . . . I activated the codec so I had a pretty good idea it wasn't going to be...blazingly fast . . . . Assuming the following: The codec referred to is for HEVC/h.265 support  The iGPU and RTX drivers are up to date.  The Intel iGPU is
• Movie Studio

  10 answers, most recent on 4/26/2026

  RE: Video Deluxe 2026
  The 'online help' leads to a rather poor web site page where nothing I search for produces any useful results. For that matter even ChatGPT can't find what I'm looking for! All I want to know is how to put a coloured frame behind a simple title.
• Other products

  3 answers, most recent on 7/13/2025

  RE: Prodad Hide v2 - I can't stop the auto play.
  @Clinton-Peck Hi. The slower the frame rate the less work the program and your computer has to do. You don't need the program to use as many frames ahead and behind to help replace the background. The more static the camera and the more the
• Video Pro X

  2 answers, most recent on 3/13/2026

  [Solved] Intel Arc PRO B60 GPU causing white flickering exporting 4K video
  Hi community and Magix,   I recently up graded and built and new computer.   Processor - Intel(R) Core(TM) Ultra 9 285K (3.70 GHz) Installed RAM           - 128 GB (127 GB usable) System type - 64-bit operating system, x64-based
• Movie Studio

  21 answers, most recent on 10/18/2025

  RE: Why Chromma key - gives additional collours on video ? Why
  @badbob Hi Which version number of Movie Edit Pro are you using, see under Help, About MAGIX Movie Edit Pro? The use of Chroma key on an image or video on track 1 of the timeline as shown in your images is unusual, what is the purpose of Chroma key
• Video Pro X

  9 answers, most recent on 1/20/2026

  No output option at 100fps for 4k-100fps video
  I'm still using VPX 14 which will load and edit my 4K-100fps video, but will not output at 100fps! I've tried to change the movie output settings manually to 100fps, but VPX 14 will not accept this change and forces the output frame rate to only
• Movie Studio

  13 answers, most recent on 5/15/2026

  RE: MMS 2025: New AI Effects
  Hi, Update to the above. Export failed at 7:29:13 after 1h 44m. The project is 7:30:06. However, the video was created and the end is during a fadeout. This may be a coincidence, but I noticed that the export seemed to fail where the playback marker
• Movie Studio

  48 answers, most recent on 9/29/2025

  RE: Weird issue with using Smart Copy/Smart Render in MEP 2019 Premium
  My understanding is that mp4 files are never compliant with Blu-ray specs. You could try rewrapping your mp4 with Shutter Encoder to a mts file. As for recoding 25p to 50i (which is still 25 fps) it's not the image that needs recoding just the
• Movie Studio

  21 answers, most recent on 10/18/2025

  RE: Why Chromma key - gives additional collours on video ? Why
  John thank you. In 2014 i did analyses of my video by using MAGIX, many years passed and wont to reanalyze same video, but i forgot settings which was at that time. The frame from video was like this .... ... And now with a new version i can't
• Movie Studio

  5 answers, most recent on 2/23/2026

  RE: Incorrect frame rate on AVI output, incorrect display of frame
  @clement5 I don't understand why you're comparing clips. Wouldn't you work on a clip, export it, edit in in another program, then re-import it? Why are you comparing the original exported clip with one that has been re-edited, in potentially another
• Movie Studio

  7 answers, most recent on 9/4/2025

  RE: Video playback stutters
  Thank you so much for all the info! Screenshots of the settings wouldnt really help since I have the language in Dutch and cant change it until I install the progam again. Tell me if you still want them. This is the info I found: Version number:
• Movie Studio

  46 answers, most recent on 1/28/2026

  RE: BEWARE Latest Nvidia GTX 591.44 Drivers
  @john-m33 Hi . . . . jerky MPEG-4 exports when using the NVIDIA GeForce RTX 5060 GPU . . . . much better using the Intel UHD Graphics option . . . This difference between the 2 GPU's performance and the jerkiness would suggest that Interlaced video