• Movie Studio

  8 answers, most recent on 2/9/2023

  RE: inserting video clip as Picture in Picture
  @Greg123 Hi . . . . John CB doesn't explain it clearly . . . . There is a checking process for tutorials created and uploaded, by any member of the forum. Tutorials are checked through actual testing of the decribed procedures for reproducibility,
• Movie Studio

  12 answers, most recent on 11/13/2022

  RE: Exporting Objects
  @AAProds Hi Al, Cut, cut, you're left with the main object in the middle. Only if you didn't watch my tutorials on basic editing in which I repeated several times to not create gaps on the timeline. Shortcuts 7 or 8, trim left end, Z, no gap, trim
• Movie Studio

  66 answers, most recent on 1/29/2025

  The output formats are messed up in Movie Studio 2024
  Some of these errors are also in 2023 and previous version.   The video test files are at: https://1drv.ms/f/s!AgEkZSUlkAcxgb0eg2M8ATSCee6zgQ?e=S9VwgB   Th test file 1 is from a DVD which has been detelecined.  The aspect ratio is 4:3 and the frame
• Movie Studio

  25 answers, most recent on 3/20/2023

  RE: Aspect Ratio Query
  Wowee! Thankyou all. There is such a lot of new information there. I think the vast majority of what I have learnt about Video Editing has been either from John’s Tutorials or this Forum. So this is all great. 1)      Ray, attached is a screenshot
• Movie Studio

  15 answers, most recent on 5/29/2023

  RE: can't move picture....
  @Mary-Stutzman Hi This sounds like you mouse is in Single track mode, change your mouse mode to Single object then drag the image - the keyboard shortcuts (top row of keyboard) are: 6 - Single object 7 - All tracks 8 - Single track There is a list
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @Reyfox Hi, Thanks for the video about Normalizing in Vegas. It proves my point - in Vegas it's a Switch and you don't know by how much the gain was adjusted. In VPX/MMS, you do. However, in VPX, you cannot adjust the ceiling which is a
• Video Pro X

  111 answers, most recent on 1/29/2025

  RE: Feedback about VIDEO PRO X15
  @CubeAce Hi Ray, I used Brightness/Contrast as an example. Sliders do not appear in all effects. In all cases where there is a box, the user can enter (Type) a value in the box. In that case, the user has to hit Enter for the value to stick. Using
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @Reyfox Hi, Thanks for the video about Normalizing in Vegas. It proves my point - in Vegas it's a Switch and you don't know by how much the gain was adjusted. In VPX/MMS, you do. However, in VPX, you cannot adjust the ceiling which is a
• Movie Studio

  One answer, on 10/20/2022

  Trying to edit keyframe or perhaps the curve on the actual object.
  I thought that the manual suggests that there is an icon on the object in the time line that reveals the curve and allows one to edit it. I don't see that "icon" to edit the curve. Okay, what I'd like to do it be able to zoom on a portion of a
• Movie Studio

  11 answers, most recent on 1/18/2023

  RE: movie studio 2023 suite questions... quality issues + other items/etc
  @Not-Applicable Hi, Far too much. I suggest that you watch the tutorials on the list in this message except Getting Started Part 1 and read the Quick Start chapter in the manual. @AAProds I disagree with your comment and suggest that you review the
• Movie Studio

  30 answers, most recent on 3/4/2023

  RE: Movie Studio 2023 vs Vegas Edit 20
  @Former user Hi, The list was not intended to be a comparison but to demonstrate main things that MMS has that VMS likely did not have, not what Vegas Pro has. I was not comparing MMS to Vegas Pro. I don't think that there are any Vegas Pro users
• Movie Studio

  10 answers, most recent on 10/11/2022

  RE: Video deluxe 2021 can't export to 17 fps MP4
  @MovieEditorr Hi, As Eric indicated, 8mm is 16fps, S8 is 18fps. Your project should be 24fps. Your imported objects will automatically be adjusted for 24. Export to 24fps, not 16 or 17. You want all types of playback programs to be able to play back
• Video Pro X

  19 answers, most recent on 10/11/2022

  RE: selecting multiple objects to split from stereo into mono
  @warren-Loomes Hi, Is there a way to export in mono sound? there is an option in the advanced tab but its grayed out Why would you want to do that? As far as I know, it can't be done. I'm not even sure that an MP4 can have mono - I think that it has
• Movie Studio

  32 answers, most recent on 10/18/2022

  RE: "Wrong" 4:3 images should have been 16:9 to fil TV screen
  @Reyfox Resolution is measured in pixels per inch / cm, whatever. If you change the ratio of the image it does not change that. Place an object in the centre of an image. Take one shot at 4:3 and another at 16:9. Take them as a raw images. Zoom in
• SOUND FORGE

  No answers, created on 10/7/2022

  Preserve header when editing
  We have audio files with additional information in an extended header.When I edit a MuLaw (.au) file, the data offset is not honored. #ifndef __AU_Header_h__#define __AU_Header_h__ typedef struct{    unsigned long    magic_number;     // .snd  
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @Reyfox Hi, Ok, back at it. DVD/BD - I, too, have DVDA. Never used it. I have all of my DVD's/BD's (about a dozen or so) scattered across my desk waiting for me to add them to my database (I'll come back to database). Most were done in Pinnacle
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @CubeAce Hi Ray,  exact audio editing is also much more precise in Vegas Pro. Easier to not having to cut audio to the frame How do you figure that? Maybe compared to MMS, but not VPX. In both, you cut video to the frame. In both, you cut audio to
• Movie Studio

  15 answers, most recent on 5/29/2023

  RE: can't move picture....
  @Mary-Stutzman I was told on a previous post that my graphics card is going to limit my use of some of the features. Mary, Don't be put off by this. Perhaps this is the case with wizzbang transitions but there are plenty of options for a nice
• Movie Studio

  2 answers, most recent on 10/3/2022

  RE: How to access logfile
  @k9vet Hi The log file for burning in MEP 2020 is located, (IIRC), in C:\Users\UserName\AppData\Roaming\MAGIX\Program version\dbk.log. Error -5 is a generic error indicating that something tripped up the encoding process - depending on which step
• Movie Studio

  6 answers, most recent on 3/7/2023

  RE: movie studio 2023 suite
  @spuddy13 Hi Brian, and welcome to the user to user forums. The forum is a good place to ask specific questions if you have a problem. Not so good for general enquiries. I have been on the forums for about four years now but did get into the editing
• Movie Studio

  30 answers, most recent on 3/4/2023

  RE: Movie Studio 2023 vs Vegas Edit 20
  @Tony-Haskett Hi Tony. Mileage probably varies from user to user depending on their individual requirements. I have no user preferences but will use what seems to work best for a given situation. I have and use Movie Edit Pro (aka Magix Movie
• Movie Studio

  10 answers, most recent on 1/4/2023

  RE: 4k blu ray support
  @Puck1263 Hi, First off, Magix Movie Studio is a rebranded Magix Movie Edit Pro and is not at all like the Vegas product. It has more features that Vegas MS had, missing a couple of Vegas MS features but there is usually a different way to do it,
• Movie Studio

  7 answers, most recent on 4/1/2023

  RE: D-Cinelike 4K/30 H.264 Drone Footage from DJI Mini 3 Pro Compatible?
  @Alan-Shadduck Hi. I managed to get DJI mini 3 Pro HEVC (H265) files and try it out. (From a previous problem on which member @Colorz supplied short files for testing purposes. Original problem post is here). It is compatible to edit within MMS 2023
• Video Pro X

  80 answers, most recent on 6/3/2023

  RE: Video Pro X and Vegas Pro exports
  @Former user @johnebaker Yes I read that post as it was happening & decided not to join in because of the ignorant, ill informed, inexperienced, blinkered & biased views in the comments, people shouldn't comment about stuff they're not