• Other products

  27 answers, most recent on 1/7/2025

  RE: DVD Architect Studio 5.0
  @Maju.M 4K/UHD Blu-ray burner for 100$, would be a cheap product. You may want to go with something more robust, of better quality. And the cost of the discs? Look at the link that I gave you. It has a description of various products. Depending on
• Movie Studio

  2 answers, most recent on 7/9/2024

  RE: how to import dvds to edit them
  @Martin-wenzel I'm not at my Magix computer at present but IIRC, for unprotected disks, if you pop in your DVD and try to drag it onto the timeline from the Media pool, MS will ask to copy the DVD to your hard drive, and then after that has been
• Movie Studio

  20 answers, most recent on 2/27/2024

  RE: Number of chapter markers
  @Alfns Hi, My best guess is 999. I just put 161 photos on the timeline and created automatic chapter markers for each using the filename. Then I opened Burn and they were all there with page after page of 16 chapters per page. Why the question? What
• Movie Studio

  46 answers, most recent on 4/10/2025

  RE: Stereo not supported - burning disc
  Yes my mistake, I was confusing the trial version that was suite that I had tried before this one, hope this has not caused to much trouble in the diagnosis. Yes it is the base version, however I would not have thought this would not be an issue in
• Video Pro X

  46 answers, most recent on 1/16/2024

  RE: VPX15, no hardware encoding during BD burning
  @Willem-vdfdeJong Hi . . . . pre-prepared files and you use software like Nero Burning Rom to simply and directly burn them to a BD, then is the BD going to work normally in BD players etc . . . . I do not have access to a BD Player at the moment so
• Video Pro X

  12 answers, most recent on 10/25/2025

  RE: ProX will not write to DVD DL discs
  @rickduley Hi Rick, My method of creating DL Discs from VPX footage is to NOT attempt the burning in VPX! For me, this has been the case for several versions of the software. The reason for this is that DL Discs require a nominated "split point",
• Video Pro X

  46 answers, most recent on 1/16/2024

  RE: VPX15, no hardware encoding during BD burning
  @CubeAce I have only tried to make ISO files and not had any such warnings about drivers.  Ray, the image of the Burn screen you have above shows you're burning a DVD ISO. We're talking about burning a BD ISO. There is a lot on the net about being
• Video Pro X

  11 answers, most recent on 1/10/2024

  RE: [Closed] Program refuses to make chapter menus.
  @Willem-vdfdeJong I hope I have correctly understood what you want to do, but if not, my apologies! I would appear that you expect to create Chapter Markers in video files running and saved in a VPX15 project. You then expect to open those same
• Other products

  27 answers, most recent on 1/7/2025

  RE: DVD Architect Studio 5.0
  I edited the post, but did not delete it. In short: 4k 50fps films, I assemble in Vegas, previously I burned discs (with menu) in DVD Architect. Currently it is not possible because DVDA does not support 4K I'm just looking for a program like DVD
• Video Pro X

  44 answers, most recent on 2/4/2025

  RE: Problem with exported DVD
  @AAProds @johnebaker I think I'm beginning to get somewhere! The Deinterlace in VDub did not work to any great extent, but removing the TBC from the input chain did! I now have a capture whose export and burn to DVD is not plagued by ghosting and
• Movie Studio

  26 answers, most recent on 1/17/2025

  RE: Blu ray disk chapters blank
  Hi @johnebaker, as I explained, the answer is yes, the audio playing correct for the chapter. Anyway, I've just finished a new job, and I have the same problem. For the latter, I used a different menu template. The burned BD works only if I export
• Photostory

  53 answers, most recent on 4/2/2024

  RE: Photostory Deluxe Won't Burn DVD: mda reports DVD creation error: 8400
  @ann-hesselsweet Hi . . . . what about the 00000.m2ts and 00001.m2ts?? should i say no to those . . . . Only use the Encode all option, doing otherwise sets you up for future burn failures. According to one of the burns Photostory is trying to set
• Photostory

  53 answers, most recent on 4/2/2024

  RE: Photostory Deluxe Won't Burn DVD: mda reports DVD creation error: 8400
  Here we go again- Cambodia project step1-put photos and clips together to create project. Saved frequently, as you suggested- easy. Played it and it locked up at most of the mp4 video clips and 1 MOV clip. So i moved the clips around and each played
• Movie Studio

  2 answers, most recent on 2/14/2026

  Audio problem with Magix MEP 2015 plus
  I have lots of footage using HD camera with 5.1 surround sound in AC-3 format. I used to edit this with no problems, until I got a new PC with Window 11 and reinstalled MEP 2015. When I try to load this footage to the timeline it says I need a free
• Video Pro X

  31 answers, most recent on 8/28/2024

  RE: Selecting Movie Settings with VP X16
  I have run that Intel EXE as a Clean Install - got the successful notice.Rebooted.Tried burning Thirteen Days to an ISO - 8min and still stalled. Checked Program Settings and found (Yes - that's the settings I found when I went there. I changed
• Video Pro X

  14 answers, most recent on 1/6/2025

  RE: Bluray Burner Problems and Multi-Language Bug in VPX16
  @browj2 Hi John . . . . is a firmware update available for the 2016 onward models, not for my 2013 . . . . Expletive comes to mind. Al's suggestion is one I too would recommend, along with LG, for BD I have an LG Lightscribe from 2010 and still
• Photostory

  19 answers, most recent on 12/22/2024

  RE: Can't understand advice given by support team
  Dear user, I cannot understand your problem for which you have contacted support.What is your problem? Sorry I was so unclear. John has helped me solve one problem. The other is that I have "missing files". Not in the Timeline, but when I try to
• Photostory

  19 answers, most recent on 12/22/2024

  RE: Can't understand advice given by support team
  Dear John Thank you so much for your helpful reply. Had the Magix support told me to "pressV" I would have saved hours of playing around with the program. Magix had told me to change the setting to CPU. It is already on CPU, so I think I'm ok. But
• Other products

  27 answers, most recent on 1/7/2025

  RE: DVD Architect Studio 5.0
  @Maju.M Hi . . . . Any Blu-Ray recorder installed in your computer will burn a Blu Ray disc with a movie in 4K quality. They just record the file, they don't check what's in those files.. . . . This is not a Blu-ray disc, what you have burned is a
• Movie Studio

  10 answers, most recent on 2/21/2025

  RE: Bluray playback issues
  Not sure why it showed only 1x My experience has been that a burner defaults to 1X when its firmware doesn't recognise a disk and consequently doesn't know the best way to burn it. As for disks, they were not all equal even in the days when there
• Video Pro X

  31 answers, most recent on 8/28/2024

  RE: Selecting Movie Settings with VP X16
  @rickduley Hi Rick, Coming a little late to this party... but certain data presented in your posts strike me as requiring some comment. DVD, by format definition, can only ever be SD (Standard Definition). It is a common misconception that DVDs are
• Photostory

  15 answers, most recent on 1/28/2026

  RE: 2026 Manual doesn't agree with program - Split Photostory, etc.
  @browj2 Hi John I have found an issue with some disc menu templates which may impact on @doane discs playability. Using the default template indicated in your images if the number of movies creates additional menu pages, the 2nd menu and further
• Other products

  27 answers, most recent on 1/7/2025

  RE: DVD Architect Studio 5.0
  @Maju.M Vegas produces 4K movies, e.g. with MP4 extension. Such a video can be played on any computer or YouTube. If we convert this movie to ISO format, we can burn it to a BlyRay disc and then play it on TV (e.g. Sony UBP-X500 or better). But
• Movie Studio

  2 answers, most recent on 2/6/2025

  Return to menu after chapter finishes on a DVD
  Good Morning, i have movie studio 2024 as well as Vegas pro 22 . Currently I'm trying to figure out "if MS" can even do it , but i want to build a video collection "3" and burn them to a dvd. however i can't find anywhere a setting that will allow a