• Movie Studio

  17 answers, most recent on 4/27/2021

  RE: Main Concept MPEG-4 Codec
  Yes guys. Many Thanks for all the replies. I Think that Scenestealer is more in touch with what I am wanted to do. Sorry if I explained in wrong. I was looking to contact Magix direct but could seem to find the form to fill in just many FAQs. I
• Movie Studio

  12 answers, most recent on 4/9/2021

  RE: where is 'record dv to mpeg' option?
  @chitown Hi It depends on what your final export format is going to be but if it is going to be DVD and your aim is to not fill up your drive with large source files, then recording straight to MPEG2 is a valid workflow and would not entail
• Movie Studio

  12 answers, most recent on 4/9/2021

  RE: where is 'record dv to mpeg' option?
  @chitown To give you an idea of MPEG bitrates, a high quality DVD is 4.7gb for a 1 hour per disk. That's 78mb/min. I would second @emmrecs workflow re capturing DV: capture as DV-AVI and then edit it. Then export in the final format such as MP4.
• Movie Studio

  12 answers, most recent on 4/9/2021

  RE: where is 'record dv to mpeg' option?
  @CubeAce @chitown @johnebaker @browj2 Using the DV import facility, from VHS, MiniDV or similar sources, I always use the DV-AVI option for saving the imported files. This results in an average of about 13GB per hour of material. The figure of 220MB
• Movie Studio

  12 answers, most recent on 4/9/2021

  RE: where is 'record dv to mpeg' option?
  @chitown Hi To record into MEP using the DV source you need a Firewire card or USB device in your computer - do you have this? If so then the DV Camera is under the record as shown below - you may not have this in the trial version. However if you
• Movie Studio

  12 answers, most recent on 4/9/2021

  RE: where is 'record dv to mpeg' option?
  Movie Edit Pro Prem. And yes I have a DV recording I would like to pull into the tool. In the manual there is a reference to saving the recording into mpeg format. It's on page 92 of the pdf file I'm viewing. I'm running the trial version. Select
• Movie Studio

  12 answers, most recent on 4/9/2021

  RE: where is 'record dv to mpeg' option?
  @chitown Hi, In which program and version? Do you mean record from DV to MPEG? John CB
• Movie Studio

  12 answers, most recent on 4/9/2021

  where is 'record dv to mpeg' option?
  Saw a reference to dv to mpeg recording as an option, but can't seem to find it. Anyone know?
• Rescue Your Videotapes!

  7 answers, most recent on 3/16/2021

  RE: My mini dv (Sony pd170) is not being recognised by the software.
  @martyn-h Hi adn welcome to the forum . . . . Sony PD170 mini dv recorder DVCAM, by a wirewire to thunderbolt  led . . . . Do you have a Firewire 400 or 800 to Thunderbolt active converter in the lead or as a separate dongle? If not just connecting
• Rescue Your Videotapes!

  7 answers, most recent on 3/16/2021

  My mini dv (Sony pd170) is not being recognised by the software.
  I have attached my Sony PD170 mini dv recorder DVCAM, by a wirewire to thunderbolt led, but the Magix software does not recognise it. I am using a windows 10 operating system. Thanks
• Audio Cleaning Lab

  6 answers, most recent on 3/9/2021

  bad file on CD
  I'm trying to load my Audio Cleaning Lab 3.0 CD and can't because the program hangs up on one file on the CD. The file is iofile.x64 in the System folder. I have no idea what's wrong with it. The CD looks very good. I cleaned the CD drive itself and
• Rescue Your Videotapes!

  4 answers, most recent on 3/3/2021

  RE: Transfering miniDV_ no audio, only video
  @Laszlo-Farkas Hi . . . . When I click mini DV, . . . . there there is nothing to choose from . . . . There won't be - as @emmrecs when using the video converter with Composite or S-Video and Audio output of you camera you recording from an analog
• Rescue Your Videotapes!

  4 answers, most recent on 3/3/2021

  RE: Transfering miniDV_ no audio, only video
  Hi Jeff, thanks for the quick reply. I tried to connect the audio plugs (red and white) but nothing happened... .... I'm not sure what you mean when you say the system doesn't see the camcorder. When I start the new project with the Magix software I
• Rescue Your Videotapes!

  4 answers, most recent on 3/3/2021

  RE: Transfering miniDV_ no audio, only video
  @Laszlo-Farkas S-Video connections carry no audio, they are video signal only. If you need to use S-Video you must be also able to connect a separate, independent audio feed from your camera to your PC. Without this, there will be no audio in. Can
• Rescue Your Videotapes!

  4 answers, most recent on 3/3/2021

  Transfering miniDV_ no audio, only video
  Hello, I can't get audio when transfering mini DVs. To be honest I had problem even with the setup as well as the system doesn't see the camcorder when I go on the miniDv (digital) root setting up the new project. The only way I was able to start
• Video Easy

  One answer, on 2/24/2021

  Record button not starting the record
  Hi all, I have installed VideoSaver8 and the latest drivers for saving videos from MINI-DV casettes to the computer. When pressing button from the MAGIX Video Easy Video Saver to record the video from the camera. Nothing happens. The video playback
• Rescue Your Videotapes!

  11 answers, most recent on 2/26/2021

  RE: Video transfer/creating footage got stuck
  @Laszlo-Farkas What format are you saving the files in? I know RYVT can save in a variety of formats and some of them can create very large files! I regularly transfer VHS and similar analogue footage to computer - though I don't use RYVT - the
• Video Pro X

  8 answers, most recent on 2/6/2021

  RE: Video Capture Dazzle or Sabrent USB
  I realized what I can do import the movie using the DV setting, then load it back into the program and export as H.264, that would work. I wish I cold just do that in VPX. I am surprised that my computer would not handle the MP2 ? Is it because its
• Movie Studio

  9 answers, most recent on 2/9/2021

  RE: Where's the Hardware Acceleration here?
  @johnebaker @CubeAce Hi guys Apologies for this long delay in getting back to you as a result of "other issues". I have at last got around to putting your advice into practice. I hadn't realised that the UHD630 GPU in the i7-10700 is disabled by
• Video Pro X

  8 answers, most recent on 2/6/2021

  RE: Video Capture Dazzle or Sabrent USB
  @paulsweigert Hi Paul . . . . Pinnacle Studio for dazzle is defaults to Mp2 but after about 1 minute of recording it starts to loose frames making it unwatchable  . . . . That would suggest the computer is dropping frames as it cannot keep up with
• Video Pro X

  8 answers, most recent on 2/6/2021

  RE: Video Capture Dazzle or Sabrent USB
  Hello John, First thanks for your help!! So the Dazzle does work with the Pinnacle Studio for dazzle but not with Video Pro X. The Sabrent model USB-AVCPT is recognized by Video Pro X but the picture flashes? I am using the same RCA cables as with
• Video Pro X

  8 answers, most recent on 2/6/2021

  RE: Video Capture Dazzle or Sabrent USB
  @paulsweigert Hi Paul All the Dazzle devices I have had in the past are locked to Pinnacle software and cannot be used for capturing in any other video editor. Is the Sabrent model USB-AVCPT? Which cables and recording option ie composite or s-video
• Movie Studio

  3 answers, most recent on 2/3/2021

  New. How to capture from pc dvd player or screen capture
  When i go into " recording source selection" it does not show screen selection, only AVCHD, Audio, Single frame, HDV camera, DV camera and analog. Any ideas how to record from the screen. Thanks
• Video Pro X

  19 answers, most recent on 1/25/2021

  RE: Mangled Audio with every track
  @John-Smith5561 Last bit; I assure you, you're misinterpreting the 'integrated GPU' requirement. I assure you it is you that is misinterpreting the requirement.....especially with this statement "So, again, you definitely do not need an igpu to