• SOUND FORGE

  5 answers, most recent on 12/11/2022

  RE: audio is not working, white noise feed back
  Hi! This is a user forum...but there are other entries about this...the solution is to uninstall the Magix Low Latency 2016 driver...even if you aren't selecting it as your driver, it does not react well with certain sound cards (typically
• Music Maker

  6 answers, most recent on 6/17/2022

  RE: Why is this software so unreliable?
  The drivers used for Wave driver and Direct sound drivers are those supplied by Microsoft and /or the audio card/chipset manufacturers. If the Microsoft drivers are used, for some models of Realtek chipset I have found that they are not the full
• SOUND FORGE

  2 answers, most recent on 8/31/2021

  RE: Horrible Static Sound coming from the left channel upon clicking recrd
  This could also be caused by the Magix Low Latency 2016 driver...some users have had this happen over the years, but uninstalling the Magix Low Latency driver seems to fix it. You can remove the driver by doing the following: Press the keyboard
• Samplitude

  One answer, on 11/8/2021

  Can't record sound playing on Lenovo Thinkpad running Windows 10
  I'm Running Magix Sound Forge Audio Studio 15.0 on a Lenovo Thinkpad, Windows Pro 10. I followed all the recommended steps and variations but can't record sound currently playing/streaming on my computer. I also haven't been able to find fixes
• Music Maker

  One answer, on 11/8/2021

  RE: Can't hear or play anything
  @Jonah-Khalifa Please configure a different audio driver in the program settings. Direct Sound should work fine for playback. If you want to use ASIO, which is necessary if you want to hear anything while you are playing with a keyboard, you need to
• SOUND FORGE

  2 answers, most recent on 10/10/2021

  RE: Sound Forge Audio Studio Loud White Noise Sound from Right Speaker
  Hi @DGN, have you updated AS (Audio Studio) to build 90?https://www.magix.com/us/support/my-service-center/product-downloads/ Try a different audio device type.. 'MS Sound Mapper' and 'Windows Classic Wave Driver' are usually trouble free . The
• Music Maker

  31 answers, most recent on 10/9/2023

  RE: ASIO drivers have no audiO
  no i use my headphones only. i am using realtek. everything is activated under that option. i think i have tried everything . the only thing is when i choose the asio driver in the main audio/midi window , the magix low latency is magix default but
• Music Maker

  One answer, on 10/17/2021

  RE: No Sound
  @Bob-Triggs Please check your audio settings inside the program settings. You can select drivers like Direct Sound, ASIO, WASAPI etc. Try one and configure it. For example, I use ASIO with Magix Low Latency 2016 and this is how I have it configured
• SOUND FORGE

  5 answers, most recent on 12/11/2022

  RE: audio is not working, white noise feed back
  AFAIK, the 'Magix Low Latency 2016' registry entry does not exist in Sound Forge Pro.If SFP is version you have, go to the "View" menu, select "Record Options" and set the "Monitor" option to 'OFF' (or Auto) after setting your record levels and
• Other products

  8 answers, most recent on 8/27/2021

  RE: Purchase HELP!
  @SunshineDel Hi . . . . . Channel limit makes this Samplitude Pro a non contender . . . . i think you are looking at the wrong product specs - Samplitude Pro X functions here state 256 physical inputs with up to 999 tracks. . . . . This is for my
• Music Maker

  One answer, on 8/21/2021

  RE: Not connecting to my microphone
  @Jerry-Eaglefeather You need to configure the audio driver in the program settings. Usually you need to select ASIO (Magix Low Latency) and then you need to click on the "Advanced..." button to open the driver settings. You can click on the wrench
• Samplitude

  2 answers, most recent on 8/29/2021

  Can't use FlexASIO with any of the magix products?..
  Hi, I've been using flexASIO with other programs for quite a while now with no problems.My guitar amp sims all use it just fine (TonelibGFX, MidiGuitar 2, Guitar Rig 6)Other DAW's seem to be fine with it too and I can use live monitoring with VST
• Music Maker

  One answer, on 8/8/2021

  RE: beatbox pro not working after installation
  @AUNGZAW-HTOO Which audio driver is selected in the program settings? Have you tried the ASIO driver Magix Low Latency and configured it with a click on the "Advanced" button?
• Samplitude

  7 answers, most recent on 8/20/2021

  RE: Cant seem to figure out how to get started with this program
  @Dopamine No problem. It is a little tricky to get started as a beginner. You can always check out the PDF manual in the help menu. It is several hundred pages long but has a lot of pictures. Or just ask for more details if our explanations aren't
• Music Maker

  3 answers, most recent on 8/5/2021

  RE: Nightmare program
  @Stuart-Morris If you have selected the Magix Low Latency driver inside the program settings in Music Maker you will not have any sound outside of Music Maker because this driver needs exclusive access to your sound hardware. You should get your
• Samplitude

  7 answers, most recent on 8/20/2021

  RE: Cant seem to figure out how to get started with this program
  @Graham-Hawker thanks for the information! and by the soundpool I was referring to the tab above the playback controls @SP. I've attached some screenshots of the default settings which are very similar to the pictures in your post. however, in this
• Music Maker

  156 answers, most recent on 1/7/2025

  RE: Wishlist for the next Music Maker!
  @MAGIX_Redaktion The video monitor is missing in the new version. It is also no longer possible to create your own keyboard shortcuts. Furthermore, some users here have the problem that Music Maker without Internet is only usable to a very limited
• Music Maker

  13 answers, most recent on 8/17/2021

  RE: AM I BEING RIPPED OFF
  Would you know why I am still seeing Magix Low Latency 2016 since I have updated to 2022 Premium?
• Music Maker

  13 answers, most recent on 8/17/2021

  RE: AM I BEING RIPPED OFF
  @MIKE-DION Hi If you mean: You see this as a small dialog usually bottom right of the screen - then this is just an information message telling you that the ASIO driver is active - ignore it as it goes away after a few seconds.  Why is it not
• Music Maker

  4 answers, most recent on 7/21/2021

  RE: No Sound after upgrading to Music maker 2022
  @Andrew-Allen Try the different audio drivers in the program settings. Direct Sound should work fine if you just use loops. If you want to use MIDI or record your own sounds you need an ASIO driver for monitoring. Magix Low Latency is an ASIO driver
• Music Maker

  12 answers, most recent on 7/18/2021

  RE: Using a RODE usb mic with Music Maker
  I'm more concerned that it says ASIO4All (3&4). Surely it should ASIO4All (1&2). I don't think it a problem having this as an output. It's similar to how mine is set albeit with a different ASIO driver and indeed with John's with Magix Low
• Music Maker

  12 answers, most recent on 7/18/2021

  RE: Using a RODE usb mic with Music Maker
  @Chris-Wilkie Hi I see from your images that you are using ASIO4All for audio playback - this should not be necessary. I use the settings indicated in the image I posted above ie the Magix Low Latency ASIO driver and can hear the other tracks while
• Music Maker

  3 answers, most recent on 7/4/2021

  RE: External Plugin VST Instruments
  @Ryan-Lester I'm not sure what your screenshot is intended to show, nor exactly which version of MM you are running. The latest is MM 2022 (aka version 30) but the first 64 bit release was MM 2021 (aka version 29). Please tell us exactly which one
• SOUND FORGE

  2 answers, most recent on 6/27/2021

  RE: playback music full of static
  This issue was solved by removing the "Magix Low Latency 2016" driver from the registry as rraud describes above. Here is a link to that thread. Seems to be an issue with new Dells. https://www.magix.info/us/forum/hiss-white-noise--1276238/