• Movie Studio

  35 answers, most recent on 12/12/2019

  RE: Possible Bug During Save Project
  @CubeAce @CubeAce Hi Ray and John, I don't have MEP2020 but I tested VPX11. Mixer automation on tracks 2 and 5 Saved, Closed, Reopened Mixer closed, but track curves still on for 2 and 5 Opened Mixer, automation off Turned on automation tracks 2
• Movie Studio

  35 answers, most recent on 12/12/2019

  RE: Possible Bug During Save Project
  @CubeAce Hi Ray, Turn on Track Curve (Alt+K) if not already on. You should see the track curve, even after saving and restarting the project. When you play back, it should work, and if the Mixer is open, the slider should follow the volume changes -
• Movie Studio

  8 answers, most recent on 11/29/2019

  RE: Ethical or legal dilemas of use of MEP with T&Cs.
  @browj2 Hi John. Don't worry about me and sound pools. I've spent years collecting sound effects with portable (and not so portable) recorders. Starting with portable open reel machines, then Mini Disc and digital recorders. I've been on beaches at
• Web Designer

  5 answers, most recent on 11/23/2019

  Navigation / Menu Bar Improvement Suggestion
  Please "follow" this post if you support this idea. Add comments if you see problems or improvements. The navigation / Menu Bar is not user friendly when the website has child pages (i.e.: tree structure): everything has to be set up manually. I'm
• ACID

  7 answers, most recent on 11/16/2019

  RE: Bought Producer Planet Scores--no Acid files as demo'ed.
  @Royce-Lerwick One of the main reasons, I believe, that people get ACID or Music Maker is to use loops to create songs, or to create loops to make songs. If you just want to add a song to a video, you do it in a video editor, not ACID. I suggest
• SOUND FORGE

  23 answers, most recent on 11/21/2019

  RE: While recording LPs Sound Forge inserts an annoying beep.
  OK: I’ll try to address some specific questions.  Yes I’ve checked for updates, several times, and I continue to learn that there are no updates to the SFAS 13 I’ve installed.  I’ve loaded SFAS 13 on two computers and get the same result – beeps.  I
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @Scenestealer @johnebaker@johnebaker Latest Update. Hurrah! Nearly completely finished now. I finally got the DVD drive up and running. I put the old and I think cheap and unbranded PCie card with the IDE interface on it to work. I just changed the
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @browj2@browj2 Thanks John CB and John EB. Indeed, I found such a colour picker in the New Blue Picker effects and while the numerical value itself doesn't matter that much is is it's position which isn't given within the frame so if I wanted to do
• Movie Studio

  10 answers, most recent on 11/2/2019

  RE: It does not export in 4k and if it does the option is not easy to see
  @Fern-Marn Hi As @RogerGunkel has said this is a user to user forum - please respect other users who are trying to help you and supply any information requested. When posting please keep the topic to the facts - opinions etc are not necessary and
• Movie Studio

  10 answers, most recent on 11/2/2019

  RE: It does not export in 4k and if it does the option is not easy to see
  My English is not the best but anyone who reads this will understand clearly the issues I wrote here.I did manage to finally do something with it on my own before getting these replies, but it is not normal and works horribly compared to the 2013
• Video Pro X

  16 answers, most recent on 10/29/2019

  RE: VPX11 Patch 17.0.2.47
  @browj2 As for multicam, it is still on the bug list as #15. Someone indicated that after a patch, multicam was now working, but I can't find it. I recall testing it and had no problem. Just to refresh this, what exactly is the problem with
• Video Pro X

  16 answers, most recent on 10/29/2019

  RE: VPX11 Patch 17.0.2.47
  @devil Hi, Yes, "ducking" is the correct term. I wish that Magix would change this in their manual. Each time I have searched I have looked for "ducking" not "damping." For anyone else reading this and for completeness, there are more ways to
• Music Maker

  2 answers, most recent on 10/11/2019

  RE: so still this DAW disapoints me,still so broken.
  UPDATE: So, I played around with this a little, as far as your main problem with the unexpected silence on the exported file and the potential involvement of track volume curves goes. I did notice the following quirk with track curves, and was
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @Scenestealer Hi Peter. I had checked both sites. I looked at the Intel drivers and on the Asus site about warnings on updates. Hence I'm not touching that side of things for now. It can wait. I also have the page for their tool. Have you looked at
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @johnebaker Hi John. I did wonder but there was no instruction manual with the power supply and no info on the box relating to the switch. If it's a limiter it would just ensure a failure in the system somewhere if it needed to draw more power. I'm
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @Scenestealer Hi Peter. It was cheaper to buy it assembled than I could find on prices when the parts were to be bought individually and I had a good look around. The ram would have been twice as expensive on its own compared to what they charged
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  Hi Peter. I am one bios update behind the current one but will leave that alone for now until I'm completely sure about my bios settings. This is something I do not do on a regular basis and not going to play with until I am sure. Both monitors are
• Movie Studio

  19 answers, most recent on 9/15/2019

  RE: Disabling Automatic Project Save - Advice Please
  @Whalebat So if the video object is deleted from the time line, where does the file still exist ? I have already told you this twice. The file is saved at the location and with the file name that is shown on the recording dialogue screen before you
• Movie Studio

  19 answers, most recent on 9/15/2019

  RE: Disabling Automatic Project Save - Advice Please
  Hi, Warning! You have turned off automatic backups. If your project becomes corrupt and will no longer load or work, then you now have no backup or recent backup, you'll be coming here asking for help and we won't be able to help you. I strongly
• Music Maker

  5 answers, most recent on 9/11/2019

  RE: MusicMaker 2020 - audio recording problems - cut off
  @ralftaro @johnebaker Thank you both for looking at this...again. I vaguely recalled mentioning this and completely forgot about the video. That's what too much camping does, or it's another senior's moment. Yesterday, I was getting very loud
• Video Pro X

  6 answers, most recent on 9/24/2019

  RE: Travel Maps Problems - Turning off and on, Multiple photos, others
  Hi John EB, Thanks for looking at this. I think that I found the bug with the photos. I was using Shift+select to select several photos. TM does not like this. Ctrl+select had no impact. So, the solution is to just select the photos by clicking on
• Audio Cleaning Lab

  19 answers, most recent on 8/29/2019

  RE: Audio Cleaning Lab is now SOUND FORGE Audio Cleaning lab
  Hi Lee, No problem - I can provide more detailed instructions, if you do want to further look into this. Basically the "controlled folder access" I was referring to is specifically the name of a feature in Windows Defender. By default, this feature
• Movie Studio

  9 answers, most recent on 8/8/2019

  RE: Surface Pro 6 and Video Deluxe
  @Fedex03 Hi, I'm far from being an expert on hardware. Which version of Movie Edit Pro (VDL) are you using? I have Premium, 18.0.3.261. I have the SP4 with the i5 chip and 8GB and playback is usually not very smooth in MEP, especially with
• Music Maker

  4 answers, most recent on 12/18/2019

  MusicMaker 2020 - Totally depressed - All my own fault
  Hands up straight away. My system is fritzy, so a lot of this is probably my own fault - however I don't have issues like this with any other software. I had a lot of issues last year with the MusicMaker 2019 update. Firstly it wouldn't load for