• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @CubeAce Oh yeah 👍 I use this MagicYUV occasionally just for the transparency & always use the 8-bit RGBA, it works so never really dig any deeper but I'll experiment with the others one day 👍
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @CubeAce Yes i bought MagicYUV Ultimate for the sole purpose of exporting transparent backgrounds, it doesn't come as part of Vegas,
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
   Hi, the M8RA codec must have come with MagicYUV because as far as i'm aware i haven't consciously installed K-Lite CODEC pack, & sorry the mention of ,mov in my comments was a mistake, i was getting a bit mixed up trying to work & play on
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @Former user Hi, I tried the AVI file and it asks to install the CODEC M8RA which is available in the K-Lite CODEC pack. I don't particularly want to install the K-Lite pack as John EB has advised against it in the past. As for the MOV file that you
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @johnebaker YUVA 4:4:4:4 doesn't have the A for Alpha at the end, This is what i rendered it with from Vegas, MagicYUV 8-bit RGBA,   @CubeAce 3840x2160 is my default at the mo, the options in the pic above are the only ones available, if you
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @CubeAce, @Former user Hi . . . . I don't know why i can play that .mov file in MEP & VLC but you can't, I have a lot of plugins but the only thing i can assume is it's the MagicYUV that i got to run in Vegas . . . . In the case of the video
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @CubeAce I don't know why i can play that .mov file in MEP & VLC but you can't, I have a lot of plugins but the only thing i can assume is it's the MagicYUV that i got to run in Vegas, It shows in MEP as a full bunch of files but only the reg
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @CubeAce 👍 yeah i think i was being a bit lazy & i was supposed to be working, so creating a transparent avi seemed easier, but...😂🤦‍♂️ If you want anything else, if i can i'll see what i can do 👍 MagicYUV shows in MEP, that'll be why i could
• Movie Studio

  43 answers, most recent on 2/15/2022

  RE: Does MEP offer the feature of adding 'boxing-arena' style light flare?
  @CubeAce @Apollo89x I've put together a dozen glints on a transparent AVI & put them on Google Drive, i've tried it in MEP, it changes every second so you'll have to chop it up & stretch the segments but like i say it works 👍
• Movie Studio

  4 answers, most recent on 2/12/2022

  RE: MEP unable to export .MOV footage into .MP4 format?
  @Apollo89x Hi, Do the mov files from AE contain a format with transparency?
• Movie Studio

  22 answers, most recent on 2/13/2022

  RE: Portrait clip on top of portrait clip, Size/Position/Rotation is weird
  @johnebaker @AAProds @CubeAce Interesting, I tried it with 9:16 jpg & added on top a 9:16 transparent png of a white dot, i could this time move the jpg behind without any alteration to the png on top. so i converted a jpg to png, this time
• Movie Studio

  22 answers, most recent on 2/13/2022

  RE: Portrait clip on top of portrait clip, Size/Position/Rotation is weird
  @CubeAce I think i understand that, but i should be able to apply two portrait clips & move the one behind without having to alter/add Size/Position to the top one to isolate it from a background mask, the mask should already be
• Movie Studio

  4 answers, most recent on 2/7/2022

  RE: Display a logo in a video
  @Rasmus-Jrgensen Hi . . . . logo (transparent GIF) . . . . Assuming that the GIF is on a higher track number than the video, MEP should recognise transparency in GIF files, do you get the same result if you use a PNG file that has transparency? What
• Movie Studio

  4 answers, most recent on 2/7/2022

  Display a logo in a video
  I am tasked to do a video with a logo in the corner. I have the logo (transparent GIF), but Magix Edit Pro will only display either the video or the logo (black screen). Help, please?
• SOUND FORGE

  4 answers, most recent on 1/27/2022

  RE: Expand recording levels
  You can use normalization to boost the overall peak amplitude (volume) to 0.0dBFS or below in Sound Forge' Process menu, A peak normalizer will not compress or change the dynamic range, it will just raise (or lower) the file's entire amplitude, An
• Movie Studio

  12 answers, most recent on 1/20/2022

  RE: VdLuxe slaat vast .. fout in module VCRUNTIME140.dll
  @CubeAce The same result, i get the blank spaces error, click ignore, it exports, & the file plays just like the other but the other way, only bottom track showing, @pevor you're better off leaving them on the same track, then use the opacity
• Movie Studio

  8 answers, most recent on 1/4/2022

  RE: Blacking out reflections in video
  @jak.willis Hi, Duplicate the track/event & add a mask in between just over the door, then edit the track below, or if it's a static camera export a single frame as a png, alter it in a photoshop type program, isolate the door so everything
• Movie Studio

  8 answers, most recent on 1/4/2022

  RE: Blacking out reflections in video
  @jak.willis Hi, Duplicate the track/event & add a mask in between just over the door, then edit the track below, or if it's a static camera export a single frame as a png, alter it in a photoshop type program, isolate the door so everything else
• Movie Studio

  53 answers, most recent on 11/13/2023

  RE: Movie Studio 2022 cannot separate multiple audio tracks
  @CubeAce, @RickJames-Bish Hi . . . . Rick needs both audio channels to be separated from a video. . . . . Correct - however the terminology is incorrect. . . . . I do have the option to select audio track 1 or 2 as long as the audio and video are
• Movie Studio

  53 answers, most recent on 11/13/2023

  RE: Movie Studio 2022 cannot separate multiple audio tracks
  @CubeAce, @RickJames-Bish Hi . . . . Rick needs both audio channels to be separated from a video. . . . . Correct - however the terminology is incorrect. . . . . I do have the option to select audio track 1 or 2 as long as the audio and video are
• SOUND FORGE

  6 answers, most recent on 12/13/2021

  RE: presets
  What kind of preset do you not understand how to create? I'm not familiar enough with the technical rubrics you mention. Here's my situation: As mentioned, in a previous version of Sound Forge, my colleague is able to access a .bj file from her
• Movie Studio

  24 answers, most recent on 12/6/2021

  RE: Ctrl-Alt-J, Ctrl-Alt-B, Ctrl-Alt-N
  @Turkana Away from home, managed to connect my computer. Use the right tools for the job. No masks: Only the text was done in BT, exported as transparent avi and imported onto the timeline in VPX. John CB
• Video Pro X

  21 answers, most recent on 11/28/2021

  RE: Playback delay
  Good day to all. There is a problem. The problem is in the playback of the AVI files. The image "jerks" ("skips", "lags") when played in VPX. AVI is still a VERY IMPORTANT component of many programs. For example, MAGIX Designer Pro X can save
• Video Pro X

  35 answers, most recent on 11/27/2021

  RE: Interpolate intermediate frames
  @Derek-McArthur @Scenestealer @johnebaker Hi Derek. I appreciate the images although trying to compare what I see at my end to what you see right in front of you often are two different things. Again,at my end I see so little difference I can't be